|
|
|
|
|
|
|
|
|
|
|
|
Product Name: MacGregor MACTEC NVG2 Fairway Wood |
|
|
 Brief Description |
 |
|
Cup Face 360°
No face welds - the entire face is the
sweet spot. Every shot feels like dead center.
It may only be a few
millimeters on the face, but hitting the ball off-center instead of
direct-center usually means chipping instead of putting. With Cup Face 360°
technology, the entire face becomes a sweet spot. The absence of welds on the
face enables maximum rebound properties over the entire clubface, creating a
sweet spot that's 30% larger than normal face insert technology. Every shot
feels like it was hit dead center.
Beta Titanium
Super hot face. Driver-like distance.
Outdriving your playing partners is very satisfying - especially when
you're hitting a 3 wood. The cup face of the MACTEC NVG2 fairway woods is
15-3-3-3 beta-titanium, the high octane supreme of titanium alloys. Its strong,
high rebound properties make the NVG2 fairway wood's face super hot. It's also
super light, allowing extra weight to be allocated to the sole. This lowers the
CG and produces low spin combined with a high launch angle - for beat stick
distance. Don't be surprised when someone asks if you're hitting a driver. You
pretty much are.
Quadra Tungsten Weighting
Super hot face. Driver-like
distance.
Quadra Tungsten Weighting operates on the principle of
triangulation. The same physics that steadies high-speed cameras gives MACTEC
NVG2 woods their superior control and accuracy. The dispersion of force among
three points provides maximum stability, because wherever the force is applied,
the nearest point will always have two other points supporting it. Bringing this
stabilizing principle to MACTEC woods is achieved by four high-density tungsten
weights: two light weights (2.5g each), one each in the extreme heel and toe,
and two heavier weights (10g each) anchored close together in the sole. With the
weight away from the face and toward the extremes, the CG is moved lower and
further back for an easy high launch, low spin, increased forgiveness and
greater accuracy. |
| Detailed Specification |
|
|
|
Club |
Loft |
Length |
Face Angle |
Swing Weight &
Torque |
|
Light |
Regular |
Stiff |
X-stiff |
|
Strong 3 |
12.5° |
43.0" |
1.0°
Open |
D1 & 4.9° |
D1 & 4.9° |
D2 & 3.9° |
D2 & 2.7° |
|
3 |
15° |
43.0" |
1.0°
Open |
D1 & 4.9° |
D1 & 4.9° |
D2 & 3.9° |
D2 & 2.7° |
|
5 |
18° |
42.5" |
Square |
D1 & 4.9° |
D1 & 4.9° |
D2 & 3.9° |
D2 & 2.7° |
|
7 |
21° |
42.0" |
Square |
D1 & 4.9° |
D1 & 4.9° |
D2 & 3.9° |
D2 & 2.7° |
|
9 |
24° |
41.5" |
Square |
D1 & 4.9° |
D1 & 4.9° |
D2 & 3.9° |
D2 & 2.7° |
- Grip: MACTEC Custom Soft Cord Grip |
|
|
|
|