Shop By Brand

Boccieri Golf Heavy Weight Series Heavy Putter

Reset Configuration
* Please select all options to see the final price.
$119.99

More Views


The Heavy Putter by Boccieri Golf will Instantly improve your control on the greens. By incorporating a back weighting system under the grip, we are able to alter your body mechanics and improve the consistency of your stroke.

Technology

Putting Stroke Inovation
The Heavy Putter has a 75% higher balance point than conventional putters, which leads to a more consistent release through impact This eliminates excessive hand and wrist action, and promotes a smoother stroke, more solid contact, and better distance control

Higher Balance Point
The essence of weighted design is the equipment's ability to improve a golfer's mechanics. By adding weight in strategic areas to manipulate the balance point, Boccieri Golf is creating fundamentally different equipment unique to the golf industry.

Higher Balance Point

Back Weighting System
The Back Weighting System is installed in the grip end of the putter. This weight was designed to allow us to add more weight to the head in order to achieve the overall weight necessary to engage the larger muscles and raise the balance point, both of which stabilize the stroke.

Back Weighting System

Pendulum Stroke

Heavier Mass: The Heavy Putter's overall weight engages the body's larger stable muscles, resulting in a more consistent pendulum stroke.

Stable Body

Core Center of Gravity: The Heavy Putter's center of gravity is closer to the human body's core CG, resulting in greater stroke stability.

Passive Wrists

Higher Center of Gravity: The Heavy Putter's higher center of gravity reduces force on the wrists.

Model

B1
100% CNC milled from a forged billet. This is a mallet putter that is face balanced and has a center shaft hosel configuration with no offset.

The head weighs 475 grams (including the pre-installed stainless steel tip weights) and there is a 250 gram weight in the grip end of the shaft that creates a balance point that is 75% higher up the shaft than a conventional putter. The overall weight is 900 grams. The tip weight kit (included withpurchase), raise or lowers the head weight by 25 grams (up to 500 down to 450).

B3-M
CNC milled surfaces on casted 303 Stainless Steel with a non-reflective grey matte finish and satin shaft. This is a mallet putter that is face balanced and has a doule bend shaft configuration a half shaft offset.

The head weighs 475 grams (including the pre-installed stainless steel tip weights) and there is a 250 grams weight in the grip end of the shaft that creates a balance point that is 75% higher up the shaft than conventional putter. The overall weight is 900 grams. The tip weight kit (included with purchase), raise or lowers the head weight by 25 grams (up to 500g or down to 450).

D1-H
This hig MOl mallet design incorporates the tour proven patented weighting technology in a new HEAVY-WEIGHT (900gm) category. The D1-H is face balanced and has a center shaft orientation. This putter features a cutting-edge design with a sound engineering purpose. The unique head design raises the center of gravity, which together with the elongated alignment line, encourages consistent sweet spot contact. The putter is constructed of Stainless Steel and has a CNC milled face and is offered in a Black PVD finish. Each HEAVY-WEIGHT uses a proprietary shft with a 250 grams weight inserted in the butt end of the shaft; this creates the necessary weight to give the golfer more control of the stroke and also produces a balance point 75% higher than conventional putters that eliminates the wristy action in the stroke. Heavy Putter uses a newly developed Winn Mid-size grip with a V17 Super Soft compound with a cord base material which produces an extremely tacky but firm feel,preferred by better golfers.

D3-H
This high MOl mallet design incorporates the tour proven patented weighting technology in a new HEAVY-WEIGHT (900gm) category. The D3 -H is face balanced and has a double bend, heel mounted shaft orientation and has a half shaft of offset. This putter features a cutting-edge design with a sound engineering purpose. The unique head design raise the center of gravity, which together with the elongated alignment line, encourages consistent sweet spot contact. The putter is constructed of Stainless Steel and has a CNC milled face and is offered in a Black PVD finish. Each HEAVY-WEIGHT uses a proprientary shaft with a 250 gram weight inserted in the butt end of the shaft; this creates the necessary weight to give the golfer more control of the stroke and also produces a balance point 75% higher than conventional putters that eliminates the wristy action in the stroke. Heavy Putter uses a newly developed Winn Mid- size grip with a V17 Super Soft compound with a cord base material which produces an extremely tacky but firm feel,preferred by better golfers.

L3-H
This traditional small mallet design incorporates the tour proven patented weighting technology in a new HEAVY-WEIGHT (900gm) category. The L3 -H is face balanced and has a heel mounted double bend shaft with a half shaft of offset. A unique three-line alignment system center top line and two framing line in the lower channel. The thin-face design promotes crisper feel at impact and improves MOl. The putter is constructed of Stainless Steel and has a CNC milled face and is offered in a Black PVD finish. Each HEAVY-WEIGHT uses a proprientary shaft with a 250 gram weight inserted in the butt end of the shaft; this creates the necessary weight to give the golfer more control of the stroke and also produces a balance point 75% higher than conventional putters that eliminates the wristy action in the stroke. Heavy Putter uses a newly developed Winn Mid- size grip with a V17 Super Soft compound with a cord base material which produces an extremely tacky but firm feel,preferred by better golfers.

Q2-H
This classic blade design incorporates the tour proven patented weirhting technology in a new HEAVY-WEIGHT (900gm) category. The Q2 is a toe-droop blade with a Plumber's neck hosel and has a full shaft of offset.The putter is constructed of Stainless Steel and has a CNC milled face and is offered in a Black PVD finish. Each HEAVY-WEIGHT uses a proprientary shaft with a 250 gram weight inserted in the butt end of the shaft; this creates the necessary weight to give the golfer more control of the stroke and also produces a balance point 75% higher than conventional putters that eliminates the wristy action in the stroke. Heavy Putter uses a newly developed Winn Mid- size grip with a V17 Super Soft compound with a cord base material which produces an extremely tacky but firm feel,preferred by better golfers.



Model B1 B3-M D1-H D3-H L3-H Q2-H
Design Mallet Mallet Mallet Mallet Mallet Blade
Hosel _ _ _ _ _ Plumber's Neck Hosel
Shaft Center Shaft Double Bend Center Shaft Proprietary Steel / Double Bend Shaft Proprietary Steel / Double Bend Shaft Proprietary Steel
Offset Zero Shaft Half Shaft Zero Shaft Half Shaft Half Shaft Full Shaft
Loft(°) 3.5 3.5 3 3 3 3
Lie(°) 72 72 70 70 70 70
Finish _ _ Black PVD Black PVD Black PVD Black PVD
Length(") 32 - 36 32 - 36 32 - 36 32 - 36 32 - 36 32 - 36
Dexterity RH / LH RH / LH RH Only RH Only RH Only RH Only
Total Weight (g) +/- 600 grams +/- 600 grams +/- 900 grams +/- 900 grams +/- 900 grams +/- 900 grams
Head Weight (g) 475 grams - 430g + 45g installed stainless steel tip weights 475 grams - 430g + 45g installed stainless steel tip weights +/- 465 grams +/- 465 grams +/- 465 grams +/- 465 grams
Weight Management System (g) 250 grams 250 grams 250 grams 250 grams 250 grams 250 grams
Face _ _ CNC Milled Face CNC Milled Face CNC Milled Face CNC Milled Face
Material 100% CNC Milled from a forged billet of 303 Stainless Steel 303 Stainless Steel with CNC milled surfaces Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Tip Weigh Kit 2 aluminum weights (20g total), 2 copper tungsten weights (70g total) 2 aluminum weights (20g total), 2 copper tungsten weights (70g total) _ _ _ _

Note: This is for your reference only and does not denote the content of the product.