The new Epic Flash Sub Zero Fairway Wood combines our groundbreaking new Flash Face Technology with precision shot-shaping technology for high swing speed players.
Callaway engineers applied learnings from Artificial Intelligence to create a new fairway wood face design that promotes increased ball speed for longer distance.
Internal Jailbreak bars stiffen and stabilize the crown and sole, placing more impact load on the face to promote faster ball speed.
Switch weight positions (16g and 2g) between front and back to adjust launch, spin and trajectory.
New, lighter OptiFit hosel design saves weight while offering a wide range of loft and lie adjustability to dial in easier launch and differing flights. And the saved weight allows us to combine Jailbreak and adjustability for the first time in a fairway wood.
|Name||Loft||Loft Range||Availability||Standard Length||Lie||CC||Swing Weight|
|3+W||13.5°||12.5° - 15.5°||RH / LH||43.00"||55.00° (Adjustable)||169||D3|
|3W||15°||14° - 17°||RH / LH||43.00"||55.00° (Adjustable)||169||D3|
|5W||18°||17° - 20°||RH Only||42.50"||55.50° (Adjustable)||156||D3|
|Shaft Name||Flex||Shaft Weight||Torque||Kickpoint|
|Project X HZRDUS Smoke Black 70 Graphite||Stiff||67||low||high|
|Project X HZRDUS Smoke Black 70 Graphite||X-Stiff||70||low||high|
|Project X HZRDUS Smoke Black 80 Graphite||X-Stiff||82||low||high|
Note: This is for your reference only and does not denote the content of the product.
ALDILA NV 2KXV BLUE 60 was introduced it quickly became the number one aftermarket golf shaft ever offered, a favorite of Tour pros and amateurs alike. After years of development, Aldila® has created NexGen Micro Laminate Technology™ – new, even thinner high performance carbon fibers combined with today’s advanced fiber resin technology.
ALDILA NV 44 MAGNUM is the first truly high performance, ultra lightweight, sub-50 gram shaft design. Typical ultra light shafts give up strength, flex, torsional stiffness, and overall stability in an effort to chase lighter weights.
ALDILA QUARANTA 40 QUARANTA™, designed by the same company that brought you the NV Magnum™ Series in 2013 has done it again by improving on this original truly high performance, ultra lightweight, sub-50 gram shaft design.
ALDILA QUARANTA 50 Typically ultra light shafts give up strength, flex, torsional stiffness, and overall stability in an effort to chase lighter weights. Our engineers have incorporated our NexGen Micro Laminate Technology® (MLT) to provide the highest level of performance in an ultra lightweight shaft.
ALDILA ROGUE I/O 60 combines advanced graphitic carbon with Aldila’s exclusive RIP Technology. This unique combination creates a Rogue shaft design that in the same weight category is lower in torque and provides for a even lower penetrating ball flight.
ALDILA ROGUE I/O 70 combines advanced graphitic carbon with Aldila’s exclusive RIP Technology. This unique combination creates a Rogue shaft design that in the same weight category is lower in torque and provides for a even lower penetrating ball flight.
ALDILA ROGUE MAX 65 incorporates Multi-AXial carbon weave material on the surface for added stability. Combining a stiff tip bend profile with a parallel handle section and a less aggressive balance point, this shaft provides a lower-mid ball flight with consistent grip fit.
ALDILA ROGUE MAX 75 This innovative use of full length 90 degree fibers provides significantly improved lateral (cross sectional) stability to the shaft during the shaft loading and release during the golf swing to provided increased energy to the golf ball at impact, and to allow for a more consistent release path swing after swing.
ALDILA ROGUE MAX 85 employs a new and unique woven graphite material to the outer layer of the shaft. This new material is incorporated into the shaft design in a 0/90 degree fiber orientation along the entire length of the shaft.
ALDILA ROGUE SILVER 60 features aerospace grade “Graphitic” carbon fibers, tapered butt geometry and a high balance point to provide exceptional feel and consistency.
ALDILA ROGUE SILVER 70 This tour leading shaft uses a stiff tip to yield low-mid ball flight with excellent control.
ALDILA ROGUE SILVER 130 M.S.I 60 offers unmatched performance and consistency through the use of advanced, extremely high modulus, Graphitic Carbon Fibers that provide performance characteristics never before available in a golf shaft.
ALDILA ROGUE SILVER 130 M.S.I 70 is a low-launch, low-spin shaft with a low torque tip-section fortified with 130 M.S.I. Graphitic Carbon Fiber, a higher balance point, and a premium ion plated finish.
ALDILA SYNERGY 50 based on one of our most successful profiles ever developed – ALDILA® Tour Blue – with one major difference. The addition of Graphene enhanced epoxy resin to provide our most innovative and stable design yet.
ALDILA SYNERGY 60 Developed with a synergy of two forms of carbon, graphite fibers and Graphene platelets, coming together in a proven design to deliver a shaft with superior stiffness, strength and performance.
ALDILA XTORSION COPPER 50R / 60S This new MAMBA (Multi-Axial Material Bias Angle) Technology places a high-tech material on the shaft in a +/- 45 degree fiber orientation. This unique use of a flat weave material on the exterior of the shaft provides significantly improved torsional stability to this counter weighted shaft in the lower half (tip-section) where the greatest percentage of twisting occurs during the swing and at impact.
|Model||Flex||Weight (g)||Torque||Kick Point|
|Aldila NV 2KXV Blue 60||S, X||61, 61||4.6, 4.0||-|
|NV Magnum 44||L/S, R, S||48, 44, 70||5.0, 6.0, 3.8||-|
|Aldila Quaranta 40||L/S, R||44, 45||6.8, 6.7||Mid/Low|
|Aldila Quaranta 50||L, R||52, 55||5.9, 5.7||Mid/Low|
|Rogue I/O 60||R, S, X||63, 64, 65||4.8, 3.8, 3.6||-|
|Rogue I/O 70||L, R, S, X||70, 70, 71, 72||4.0, 3.7, 3.3, 3.1||-|
|Rogue MAX 65||R, X||68, 69.5||4.5, 3.3||-|
|Rogue MAX 75||R, S, X||74.5, 76, 80||4.4, 3.6, 3.2||-|
|Rogue MAX 85||S, X||-||-||-|
|Rogue Silver 60||R, S, X||67, 69, 72||3.8, 3.4, 3.1||-|
|Rogue Silver 70||R, S, X||76, 77, 78||3.5, 3.1, 2.8||-|
|ROGUE SILVER 130 M.S.I 60||TX, TS||66, 64||3.5, 3.7||High, High|
|ROGUE SILVER 130 M.S.I 70||TX, TS||75, 73||2.9, 3.1||High, High|
|Aldila Synergy 50||L, R, S||56, 58, 60||5.2, 5.2, 5.2||Mid, Mid, Mid|
|Aldila Synergy 60||L, R, S, X||65, 66, 68, 70||4.7, 4.7, 4.7, 4.7||Mid, Mid, Mid, Mid|
|XTORSION COPPER 50R / 60S||R, S||56, 67||4.8, 4.2||-|
FUJI ATMOS TS BLACK 6 is geared towards the performance golfer looking to keep the ball flighted down with low spin.
FUJI ATMOS TS BLACK 7 similarities include keeping the handle flexes the same for feel, but adjusting mid and tip sections for launch and spin to achieve your desired ball flight.
FUJI ATMOS TS BLUE 6 is the culmination of key learnings from more than two decades of tour-driven products. The development of ATMOS Tour Spec was an extensive process by which critical player feedback and fitting needs were at the forefront.
FUJI ATMOS TS BLUE 7 Recognizing that Tour professionals need to keep the ball flighted down with low spin and that these players have a variety of different swing types and clubhead combinations, it was essential to engineer a variety of options to optimize performance.
FUJI PRO 2.0 6 features a more effective loading zone to store more energy in the downswing which translates to more clubhead speed.
FUJI PRO 2.0 7 the torsional stiffness has been increased by 14% to produce greater overall shot control and lower spin compared to the original Pro. It’s ideal for golfers of all skill levels, and available in Tour Spec for more aggressive swing tempos.
FUJI PRO 2.0 TOUR SPEC 6 This has allowed them to build the Pro 2.0 shafts with a more effective loading zone for more club head speed. They’ve also increased the torsional stiffness by 14% to reduce spin and improve dispersion.
FUJI PRO 2.0 TOUR SPEC 7 you make your fairway finding swing or go 110%, you’ll feel the mid-section load in transition and deliver a powerful kick through the ball.
FUJI PRO 2.0 TOUR SPEC 8 PRO 2.0 a more effective loading zone to store more energy in the downswing which translates to more clubhead speed.
FUJI PRO 62 GREEN Designed with a custom bending profile which creates a stiffened mid and tip section with more forgiveness in the handle section, the 2016 PRO retains Core HIT technology for greater overall accuracy and stability throughout the entire swing.
FUJI PRO 72 GREEN Designed with a custom bending profile which creates a stiffened mid and tip section with more forgiveness in the handle section, the 2016 PRO retains Core HIT technology for greater overall accuracy and stability throughout the entire swing.
FUJI SPDR EVO II 665 TS Unique layering of carbon sheets and resin material helps maximize acceleration through impact. Active release characteristic that promotes a higher initial launch than the Motore Speeder.
FUJI SPDR EVO II 765 TS Evo II is the lowest launch of the 3 Evolution shafts. Use of Triax Core technology, three-directional woven graphite material on the inside layer of the shaft, provides maximum stability and prevention of ovalization.
FUJI SPDR EVO IV 569 is based on the profile of the II (low launch and low spin), but has a slightly softer mid to tip section to increase launch angle while maintaining low torque/spin with added high-strength materials.
|Model||Flex||Weight (g)||Torque||Kick Point|
|FUJI ATMOS TS BLACK 6||S, X||65, 69||3.4, 3.4||-|
|FUJI ATMOS TS BLACK 7||S, X||74, 76||3.0, 3.0||-|
|FUJI ATMOS TS BLUE 6||S, X||64, 65||3.5, 3.5||-|
|FUJI ATMOS TS BLUE 7||S, X||74, 77||3.1, 3.1||-|
|FUJI PRO 2.0 6||S, X||67.5, 67.5||3.3, 3.2||-|
|FUJI PRO 2.0 7||S, X||76, 77.5||3.1, 3.1||-|
|FUJI PRO 2.0 TOUR SPEC 6||S, X||67, 69||3.0, 3.0||-|
|FUJI PRO 2.0 TOUR SPEC 7||S, X||78.5, 79||2.9, 2.9||-|
|FUJI PRO 2.0 TOUR SPEC 8||S, X||86.5, 87||2.7, 2.7||-|
|PRO 62 GREEN||R, S, X||65, 66, 67||4.3, 4.3, 4.3||-|
|PRO 72 GREEN||R, S, X||75, 76, 76||4.2, 4.2, 4.2||-|
|SPDR EVO II 665 TS||R, S, X||63, 65, 66||3.4, 3.4, 3.4||-|
|SPDR EVO II 765 TS||R, S, X||-||-||-|
|SPDR EVO IV 56||R, S||59, 60.5||3.8, 3.7||-|
GDI G-SERIES RED G-60 incorporates V Directional Technology for a balanced shaft that has good control and distance. This high-60 gram shaft features a mid bend profile and torque to provide a medium ball flight and spin rate.
GDI TOUR AD BB-6 is designed to promote a low/mid launch angle and lower ball spin. Designed and manufactured exclusively at the Graphite Design factory headquarters in Japan, the Tour AD BB is available in 50g R2(Lite), R1(Regular) and S flex, 60g SR(Stiff Regular), S and X flex, 70g S and X flex and 80g S and X flex.
GDI TOUR AD BB-7 incorporates Toray nano-material in the tip section for increased stability and feel.
GDI TOUR AD DI-6 This mid-60 gram shaft features a mid bend profile and low torque to provide medium ball flight and spin rate with good control.
GDI TOUR AD DI-7 is designed to promote a low/mid launch angle and lower ball spin.
GDI TOUR AD GP-6 BLACK like its predecessors, utilizes premium, aerospace quality 50t carbon-fiber materials in order to deliver the best feeling and performing shaft available to golfers.
GDI TOUR AD GP-7 BLACK The Tour AD GP-6 is designed with a very stiff tip and stiffer mid to butt section to promote a mid-launch condition and low spin.
GDI TOUR AD IZ-5 introduces the latest in the Tour AD premium line of golf shafts, the Graphite Design Tour AD IZ – “ Into the Zone” . Designed and manufactured at the Graphite Design Japan factory headquarters, the new Tour AD IZ wood shaft has a very stealthy look to it in black with white/orange accents and a sleek new matte finish.
GDI TOUR AD IZ-6 The Tour AD IZ , like all of the premium Tour AD wood shafts, utilizes premium, aerospace quality 50t carbon-fiber materials in order to deliver the best feeling and performing shaft available to golfers.
GDI TOUR AD IZ-7 has a firm stiffness starting at the handle, and medium center section and a firm+ tip profile to promote a high launch angle and low ball spin rates.
GDI TOUR AD IZ-8 The new Tour AD IZ also utilizes TORAYCA ® T1100G carbon-fiber pre-preg with NANOALLOY ® technology in the tip section of the shaft for additional shaft stability, exceptional feel and precise ball control.
GDI TOUR AD MJ-7 introduces 3rd generation Toray Nano-alloy material in the tip and 50 ton aerospace-grade carbon in the mid/butt sections. This combines to produce a soft tip and stiff mid/butt which promotes high launch/mid spin with signature Tour AD feel.
GDI TOUR AD MT-6 is designed to provide a player with Maximum energy Transfer and superior Accuracy and Distance. The Tour AD MT features a stiffer mid-section and slightly softer tip. This design feature will produce optimal launch and spin characteristics in today’s modern low spin drivers.
GDI TOUR AD MT-7
GDI TOUR AD TP-6 utilizes a brand new technology called “Fast Taper Technology” or FTT. This new technology incorporates a faster taper rate from the lower mid-section to the tip of the shaft.
GDI TOUR AD TP-7 The new Fast Taper Technology provides the overall feeling of greater club head control at impact and an increase in club head speed through the swing.
GDI TOUR AD TP-8
GDI TOUR AD VR-6 shaft also utilizes FTT -Fast Taper Technology, which incorporates a faster taper rate from the grip to the lower mid-section of the shaft, providing the overall feeling of greater club head control at impact and an increase in club head speed.
GDI TOUR AD VR-7 shaft profile is firm to stiff starting at the handle, medium/firm in the center section and has a firm tip to promote a mid/high launch angle and low ball spin rates.
|Model||Flex||Weight (g)||Torque||Kick Point|
|G-SERIES RED G-60||R, S||67, 68||3.3, 3.3||-|
|TOUR AD BB-6||S, X||65, 66||3.2, 3.2||-|
|TOUR AD BB-7||S, X||74, 76||3.0, 3.0||-|
|TOUR AD DI-6||S, X||65, 66.5||3.3, 3.3||-|
|TOUR AD DI-7||S, X||73.5, 75||3.2, 3.1||-|
|TOUR AD GP-6 BLACK||S, X||66, 67||3.1, 3.1||-|
|TOUR AD GP-7 BLACK||S, X||75, 76||2.9, 2.9||-|
|TOUR AD IZ-5||S, X, R1||54, 56, 58||2.9, 2.9||Mid, Mid|
|TOUR AD IZ-6||S, X||63, 65||3.2, 3.2||Mid, Mid|
|TOUR AD IZ-7||S, X||72, 74||3.1, 3.1||Mid, Mid|
|TOUR AD IZ-8||S, X||82, 83||2.9, 2.9||Mid, Mid|
|TOUR AD MJ-7||S, X||71, 72||3.2, 3.2||-|
|TOUR AD MT-6||S, X||64.5, 66||3.3, 3.3||-|
|TOUR AD MT-7||S, X||74, 75||3.1, 3.1||-|
|TOUR AD TP-6||S, X||65, 67||3.2, 3.2||-|
|TOUR AD TP-7||S, X||73, 75||3.0, 3.0||-|
|TOUR AD TP-8||S, X||85, 87||2.6, 2.6||Mid, Mid|
|TOUR AD VR-6||S, X||65, 66||3.2, 3.2||Mid, Mid|
|TOUR AD VR-7||S, X||73, 75||3.0, 3.0||Mid, Mid|
MATRIX OZIK 55X4 WHITE TIE has a stiffness profile designed for efficient energy transfer in a stable structure that offers control in a high-launch, low-spin shaft.
MATRIX OZIK 65Q4 RED TIE is designed for tight dispersion in a mid-launch, mid-spin shaft at a variety of weights.
MATRIX OZIK 75M4 BLACK TIE is the evolution of the highly successful M3, Q3 and X3 shafts. With feedback from tour and club fitters the design of the tip sections have been modified by using a different material layup for each specific shaft to optimize launch characteristics for each family.
|Model||Flex||Weight (g)||Torque||Kick Point|
|OZIK 55X4 WHITE TIE||L, R||-, 63||-, 4.2||-|
|OZIK 65Q4 RED TIE||X-Stiff||64||3.9||-|
|OZIK 75M4 BLACK TIE||R, S||65, 67||4.6, 4.0||High, High|
MCA -15 DIAMANA D- WHITE 60 This White Board profile, featuring a 60-gram series, ha a traditional balance point to help maximize target performance. It's tip-stiff for stronger players seeking a low launch and low spin from a standard-length, standard-weight driver -- with maximum control.
MCA -15 DIAMANA D- WHITE 70 This White Board profile, featuring a 70-gram series, ha a traditional balance point to help maximize target performance.
MCA -15 DIAMANA D- WHITE 80 It's tip-stiff for stronger players seeking a low launch and low spin from a standard-length, standard-weight driver -- with maximum control.
MCA -15 DIAMANA S- BLUE 60 This Blue Board profile, featuring a 60-gram series for the first time, is a versatile mid-launch shaft, with a higher balance point than the original. Combined with the traditional "smooth" bend profile, the new balance point maximizes shotmaking workability and clubfitting versatility. It gives the Blue Board player even more performance options.
MCA -15 DIAMANA S- BLUE 70 This Diamana™ M+PLUS profile with its newest 70-gram series addition features the highest balance point in the product line. Its softer tip is for players wanting to go lighter and longer, while capitalizing on the high balance point movement in equipment. It's our highest-launching profile in the Diamana™ +PLUS Series.
MCA -16 DIAMANA M- GREEN 40 is the lightest weight Diamana offering from MRC. It features a high launch and mid to high spin profile.
MCA -16 DIAMANA M- GREEN 50 Its softer tip is ideal for players wanting to go lighter and longer, while capitalizing on the high balance point movement in equipment. It's our highest-launching profile.
MCA -16 DIAMANA M- RED 60 is the high launch model in next gen Diamana +Plus Series. Adaptive Balance Point compliments its 60g weight, high flight profile with a high balance point. Progressive Torque matches torque with flex to optimize stability by swing speed.
MCA GRAND BASSARA 39 is finished with an ultra-premium Ion Plating (IP) with a jet black dye, and sophisticated holographic decal.
MCA KURO KAGE BLACK TiNi 50 now with Titanium Nickel (TiNi) Wire added to the tip section for players looking to control launch and spin while shaping shots. This "classic" smooth bend profile is the perfect compliment to the lower-launching
MCA KURO KAGE SILVER TiNi 60 utilizes TiNi (titanium nickel) wire for a responsive tip with LRC (low resin content) prepreg materials for stability and feel. The firm tip of the Kuro Kage Silver bend profile provides mid launch, mid spin performance.
MCA TENSEI AV BLUE 65 Aluminum Vapor Coated Fiber in the butt section adds stability, to help achieve the desired EI target and stiffness.
MCA TENSEI AV BLUE 75 And the AV weave is tighter and thinner, to help prevent shaft ovaling and improve energy transfer.
MCA TENSEI PRO BLUE 60 incorporates three times the Carbon Fiber/DuPont™ Kevlar® (CK) weave in the butt-section – providing enhanced stability and maximum feel.
MCA TENSEI PRO BLUE 70 profile modernizes MCA GOLF’s tour-proven, classic smooth bend profile.
MCA TENSEI PRO ORANGE 60 This first of it’s kind bend profile for MCA GOLF uses a counter-balanced design along with an extreme tip-stiff design to provided added versatility for the stronger player.
MCA TENSEI PRO ORANGE 70 This series also incorporates High Modulus, premium 40-Ton hybrid prepreg infused with tungsten powder in targeted positions throughout the shaft. A tip-section reinforced with MR70 – Mitsubishi Chemical’s strongest carbon fiber to date, delivers lower torque, and delivers tour preferred control and stability.
MCA TENSEI PRO WHITE 60 which features a multi-material design that incorporates more performance-oriented materials than we’ve ever used in a shaft.
MCA TENSEI PRO WHITE 70 A Boron-reinforced tip-section delivers lower torque, and promotes tour preferred control and stability.
|Model||Flex||Weight (g)||Torque||Kick Point|
|MCA -15 DIAMANA D- WHITE 60||S, X||62, 64||3.6, 3.5||-|
|MCA -15 DIAMANA D- WHITE 70||X||73||3.1||-|
|MCA -15 DIAMANA D- WHITE 80||S||83||3.2||-|
|MCA -15 DIAMANA S- BLUE 60||S, X||61, 64||4.4, 3.8||-|
|MCA -15 DIAMANA S- BLUE 70||S, X||70, 71||4.0, 3.5||-|
|MCA -16 DIAMANA M- GREEN 40||L, R||43, 45||6.9, 6.7||Mid, Mid|
|MCA -16 DIAMANA M- GREEN 50||L, R, S||47, 51, 52||7.1, 6.3, 5.6||Mid, Mid, Mid|
|MCA -16 DIAMANA M- RED 60||R, S, X||55, 58, 60||5.8, 5.0, 4.3||Mid, Mid, Mid|
|MCA GRAND BASSARA 39||L, R||32, 35||11.8, 10.8||Mid-Low, Mid-Low|
|MCA KURO KAGE BLACK TiNi 50||L, R, S, X||51, 55, 56, 59||5.9, 5.7, 4.8, 4.8||Mid, Mid, Mid, Mid-High|
|MCA KURO KAGE SILVER TiNi 60||R, S, X||64, 66, 68||4.6, 4.3, 3.4||Mid, Mid, Mid-High|
|MCA TENSEI AV BLUE 65||R, S, X||65, 67, 68||4.4, 3.9, 3.4||Mid, Mid, Mid|
|MCA TENSEI AV BLUE 65||R, S, X||74, 77, 78||4.1, 3.9, 3.4||Mid, Mid, Mid|
|MCA TENSEI PRO BLUE 60||S, TX||64, 68||4.0, 3.9||Mid, Mid|
|MCA TENSEI PRO BLUE 70||S, TX||77, 86||3.2, 2.8||Mid, Mid|
|MCA TENSEI PRO ORANGE 60||S, TX||64, 67||3.5, 3.4||High, High|
|MCA TENSEI PRO ORANGE 70||S, TX||72, 73||2.9, 2.8||High, High|
|MCA TENSEI PRO WHITE 60||S, TX||62, 68||3.9, 3.9||High, High|
|MCA TENSEI PRO WHITE 70||S, TX||73, 77||3.3, 3.2||High, High|
OBAN DEVOTION 4 most diverse offering with various shaft weights ranging from 43 grams to 84 grams. The design pattern remains consistent throughout the Devotion Series, while kick points and torques vary depending on the weight class.
OBAN DEVOTION 6 High quality graphite utilized throughout shaft construction creates firm butt, mid and tip sections and provides inherent stability throughout the shaft load sequence.
OBAN DEVOTION 7 Structural integrity throughout the swing dynamics. Ideal for the player who tends to create more load in the shaft with a quicker tempo.
OBAN HASHIMOTO 55 offers an unprecedented blend of fashion, form and function – resulting in better feel and improved driving distance. Inspired by the mythical artisan with an affinity for excellence.
OBAN KIYOSHI BLACK 65 new addition to the astoundingly popular Kiyoshi product line. Like the Kioyshi Purple (Kiyoshi PRP), the shaft offers a low spin rate, but provides a lower ball flight by raising the kick point of the shaft. Players with a quicker tempo.
OBAN KIYOSHI GOLD 65 is produced using OBAN’s proprietary MultiPlex Design Technology (MPT) to effectively combine a firm butt section and a responsive mid and tip section for unprecedented shaft performance.
OBAN KIYOSHI GOLD 75 The Kiyoshi Gold integrates the world’s finest graphite materials design to achieve expertly calibrated, superior dynamic reactions throughout the swing.
OBAN KIYOSHI PURPLE 65 is an ultra-lightweight shaft that uses a proprietary technology to improve torque control, bend points and stability. A medium/stiff bend profile and tip stiffness create a low/mid launching shaft with reduced spin.
OBAN KIYOSHI WHITE 65 is produced using OBAN’s breakthrough proprietary MultiPlex Design Technology (MPT) to effectively combine a softer butt section with a stiff tip and mid-section for unprecedented shaft performance.
OBAN KIYOSHI WHITE 75
OBAN KIYOSHI TOUR LTD. 60 our latest technically superior shaft innovation designed to radically decrease the shaft ovalization throughout the golf swing. To maintain the shaft’s geometric shape during the load / unload sequence. The Kiyoshi Tour Limited offers unprecedented control and extraordinary feel for players seeking to improve accuracy and distance.
|Model||Flex||Weight (g)||Torque||Kick Point|
|OBAN DEVOTION 4||R, S||48, 49||5.0, 5.0||-|
|OBAN DEVOTION 6||R, S||66, 67||3.6, 3.6||-|
|OBAN DEVOTION 7||X-Stiff||78||3.5||-|
|OBAN HASHIMOTO 55||Regular||57||4.0||-|
|OBAN KIYOSHI BLACK 65||Stiff||70||3.3||-|
|OBAN KIYOSHI GOLD 65||Stiff||68||3.3||-|
|OBAN KIYOSHI GOLD 75||X-Stiff||78||3.3||-|
|OBAN KIYOSHI PURPLE 65||Stiff||69||3.5||-|
|OBAN KIYOSHI WHITE 65||Stiff||69||3.1||-|
|OBAN KIYOSHI WHITE 75||X-Stiff||81||2.9||-|
|OBAN KIYOSHI TOUR LTD. 60||X-Stiff||69||3.7||-|
TT PROJECT X EVENFLOW BLACK 65 have a constant taper profile, which provides players a smooth feel as the shaft loads and releases energy in the downswing,” David Wilson, senior tour manager of graphite golf shafts for Project X said. “Players on the professional tours continue to give us consistent feedback.
TT PROJECT X EVENFLOW BLACK 75 The result is a powerful flow of energy that feels smooth while delivering gnarly distance, making EvenFlow the ultimate complement to the Project X HZRDUS line.
TT PROJECT X EVENFLOW BLUE 65 Like a crashing wave in the Pacific, Even Flow’s revolutionary “even” bend profile transfers energy more efficiently throughout the swing to create maximum energy release at impact.
TT PROJECT X EVENFLOW BLUE 75 The result is a powerful flow of energy that feels smooth and delivers gnarly distance.
TT PROJECT X EVENFLOW GREEN 45 is a mid launch/spin shaft that features a firm mid-section for increased stability.
TT PROJECT X EVENFLOW GREEN 55 in a wide weight range, including ultra-lightweight options for lower swing speed players looking to maximize speed and distance.
TT PROJECT X EVENFLOW GREEN 65 features an even bend profile that transfers shaft load more efficiently for maximum energy release at impact.
TT PROJECT X EVENFLOW T1100 WHITE 65 uses the strongest high modulus fibers available to create the stiffest tip and lowest launching/spinning profile in the EvenFlow family.
TT PROJECT X EVENFLOW T1100 WHITE 75 is a powerful flow of energy that feels smooth while delivering gnarly distance, making EvenFlow the ultimate complement to the Project X HZRDUS line.
TT PROJECT X HZRDUS BLACK 65 (HANDCRAFTED) delivers insane distance for the stronger and more aggressive golfer, without sacrificing control. Increased stiffness along the full length of the golf shaft that allows golfers to put more power behind the ball, HZRDUS Black is the lowest spinning Project X graphite shaft.
TT PROJECT X HZRDUS BLACK 75 (HANDCRAFTED)
TT PROJECT X HZRDUS SMOKE BLACK 60 is designed for today’s aggressive swingers while providing new optimized material placement to promote an improved feel and an increase in playability.
TT PROJECT X HZRDUS SMOKE BLACK 70 Featuring a low-spin and low-launch profile that maintains the HZRDUS reputation.
TT PROJECT X HZRDUS SMOKE BLACK 80 featured an ultra-stable midsection for players with an aggressive tempo seeking to minimize launch and spin.
TT PROJECT X HZRDUS T1100 65 (HANDCRAFTED) the strongest fiber available, to build a shaft with a stiff bend profile throughout so that it is the ultimate spin killer for players with the most aggressive tempo,” Don Brown, director of golf innovation and product strategy for Project X said. “HZRDUS T1100 is also counter-balanced which allows for players to add more club length or head mass to achieve more ball speed.
TT PROJECT X HZRDUS T800 55 uses T800 carbon fiber which combines high modulus with high tensile strength to create a very stable shaft that is also very responsive.
TT PROJECT X HZRDUS T800 65 The shaft features increased stiffness along the full length of the golf shaft, which allows golfers to put more power behind the ball.
TT PROJECT X HZRDUS YELLOW 65 gives the HZRDUS line an even lower launching model. This shaft has a stiffer tip which reduces launch.
TT PROJECT X HZRDUS YELLOW 75 Along with straight tapered midsection geometry, it is also backweighted to allow for the heavier head weights associated with higher ball speeds.
TT PROJECT X HZRDUS YELLOW 85 is designed to deliver insane distance to the new stronger and more aggressive golfer, without sacrificing distance and control.
TT PROJECT X HZRDUS YELLOW 65 (HANDCRAFTED) is a backweighted low spinning shaft featuring a straight tapered midsection. This profile is perfect for players with a smooth tempo who want to reduce launch and spin rates.
TT PROJECT X HZRDUS YELLOW 75 (HANDCRAFTED) The backweighting allows for additional mass to be added to the head for increased ballspeed.
|Model||Flex||Weight (g)||Torque||Kick Point|
|PROJECT X EVENFLOW BLACK 65||S, X||67, 69||3.7, 3.2||-|
|PROJECT X EVENFLOW BLACK 75||S, X||75, 79||3.5, 2.8||-|
|PROJECT X EVENFLOW BLUE 65||R, S, X||65, 67, 69||4.6, 3.7, 3.2||-|
|PROJECT X EVENFLOW BLUE 75||R, S, X||76, 79, 79||4.3, 3.5, 2.8||-|
|PROJECT X EVENFLOW GREEN 45||L, R||44, 46||-||-|
|PROJECT X EVENFLOW GREEN 55||L, R, S||48, 59, 59||-||-|
|PROJECT X EVENFLOW GREEN 65||L, R, S||63, 63, 64||-||-|
|PROJECT X EVENFLOW T1100 WHITE 65||S, X||67, 68||3.0, 3.0||-|
|PROJECT X EVENFLOW T1100 WHITE 75||S, X||75, 76||3.0, 3.0||-|
|PROJECT X HZRDUS BLACK 65 (HANDCRAFTED)||S, X||62, 62||3.2, 3.2||-|
|PROJECT X HZRDUS BLACK 75 (HANDCRAFTED)||S, X||75, 75||2.9, 2.9||-|
|PROJECT X HZRDUS SMOKE BLACK 60||R, S, X||59, 59, 61||4.0, 3.5, 3.5||-|
|PROJECT X HZRDUS SMOKE BLACK 70||S, X||68, 70||3.5, 3.5||-|
|PROJECT X HZRDUS SMOKE BLACK 80||S, X||-||-||-|
|PROJECT X HZRDUS T1100 65 (HANDCRAFTED)||S, X||65, 65||2.8, 2.8||-|
|PROJECT X HZRDUS T800 55||L, R, S||-||-||-|
|PROJECT X HZRDUS T800 65||L, R, S||-||-||-|
|PROJECT X HZRDUS YELLOW 65||S, X||63, 63||3.3, 3.3||-|
|PROJECT X HZRDUS YELLOW 75||S, X||76, 76||2.9, 2.9||-|
|PROJECT X HZRDUS YELLOW 85||S, X||-||-||-|
|PROJECT X HZRDUS YELLOW 65 (HANDCRAFTED)||S, X||63, 63||3.3, 3.3||-|
|PROJECT X HZRDUS YELLOW 75 (HANDCRAFTED)||S, X||75, 75||2.9, 2.9||-|
UST ATTAS COOOL 6 is the latest iteration in the ATTAS line. This model uses high modulus carbon fiber and lower resin content to give golfers incredible stability in their hands while providing a smooth feel in a lighter package.
UST HELIUM 4 is designed with premium materials for all golfers looking for a lightweight structure with extreme stability.
UST PROFORCE VTS SILVER 6 is turning traditional shaft fitting upside down. By not isolating shaft performance to swing speed or physical strength alone, PROFORCE VTS shafts fine tune how weight, flex and torque work in concert to create distance, control and feel.
UST RECOIL ES 440 WMS is a lightweight wood shafts designed to provide maximum distance and control for all golfers through the latest in design and materials. This is for the golfer looking to increase initial launch and maximum distance.
|Model||Flex||Weight (g)||Torque||Kick Point|
|UST ATTAS COOOL 6||S, X||65, 67||3.6, 3.6||-|
|UST HELIUM 4||L, R||49||6.2||-|
|UST PROFORCE VTS SILVER 6||R, S, X||65, 66, 69||4.0, 4.0, 4.0||-|
|DIAMOND UNIV. BLK/BLUE|
|DIAMOND UNIV. BLK/GREY|
|DIAMOND UNIV. BLK/ORANGE|
|DIAMOND UNIV. BLK/RED|
|DIAMOND UNIV. BLK/SILVER|
|DIAMOND UNIV. BLK/WHITE CORD RIBBED|
|DIAMOND UNIV. GRY/GREY WMS|
|DIAMOND UNIV. XR WMS|
|DIAMOND UNIV. GRY/LT. BLUE WMS|
|DIAMOND UNIV. GRY/SILVER|
|DIAMOND UNIV. PRO SERIES CORD RIBBED|
|WINN EXCEL WRAP CG LOGO GREY|
|GP ALIGN NEW DECADE BLK/WHITE|
|GP ALIGN NEW DECADE BLK/WHT/GRN|
|GP ALIGN NEW DECADE PLUS 4 GRY/GREY|
|GP ALIGN TOUR VELVET|
|GP CP2 PRO (RED CAP)|
|GP CP2 WRAP (BLUE CAP)|
|GP J200 BLK/GOLD|
|GP NEW DECADE BLK/BLACK|
|GP NEW DECADE BLK/BLUE|
|GP NEW DECADE BLK/ORANGE|
|GP NEW DECADE BLK/RED|
|GP NEW DECADE BLK/SKY BLUE|
|GP NEW DECADE BLK/WHITE|
|GP NEW DECADE CHEVRON BLK/BLUE|
|GP NEW DECADE CHEVRON BLK/DK GREEN|
|GP NEW DECADE CHEVRON BLK/NEON GREEN|
|GP NEW DECADE CHEVRON BLK/ORANGE|
|GP NEW DECADE CHEVRON BLK/PURPLE|
|GP NEW DECADE CHEVRON BLK/RED|
|GP NEW DECADE CHEVRON BLK/SKY BLUE|
|GP NEW DECADE CHEVRON BLK/WHITE|
|GP NEW DECADE CHEVRON BLK/YELLOW|
|GP NEW DECADE CHEVRON GRY/BLK/WHITE|
|GP NEW DECADE CHEVRON GRY/BLK/WHT GREEN|
|GP NEW DECADE CHEVRON GRY/BLK/WHT TEAL|
|GP NEW DECADE CHEVRON GRY/RED/WHITE|
|GP NEW DECADE CHEVRON WHITEOUT/BLACK|
|GP NEW DECADE CHEVRON WHITEOUT/NAVY|
|GP NEW DECADE PLUS 4 BLUE|
|GP NEW DECADE PLUS 4 GREEN|
|GP NEW DECADE PLUS 4 GREY|
|GP NEW DECADE PLUS 4 RED|
|GP TOUR VELVET 360 GREY CAP|
|GP TOUR VELVET 60 FULL CORD|
|GP TOUR VELVET 60|
|GP TOUR WRAP 2G BLK|
|GP TOUR WRAP 2G WHITE|
|GP Z-GRIP FULL CORD|
|IOMIC STICKY 2.3 BLACK|
|IOMIC STICKY 2.3 RED|
|IOMIC STICKY JUNIOR RED|
|LAMKIN COMFORT CHEVRON BLACK WMS|
|LAMKIN CROSSLINE CHEVRON BLK/BLACK|
|LAMKIN XLINE BLK/BLK/GRAY CHEV|
|LAMKIN CROSSLINE (47G) 58RND GREY BC|
|LAMKIN CROSSLINE FULL CORD|
|LAMKIN XLINE NEW LOGO 60|
|LAMKIN UTX CHEVRON ACID GREEN/BLK|
|LAMKIN UTX CHEVRON BLK/BLACK (NO CORD)|
|LAMKIN UTX CHEVRON BLK/GREEN CAP|
|LAMKIN UTX CHEVRON BLK/SILVER (NO CORD)|
|LAMKIN UTX CHEVRON BLU/SILVER|
|LAMKIN UTX CHEVRON BLU/WHITE|
|LAMKIN UTX CHEVRON RED/SILVER|
|LAMKIN UTX GREY|
|LAMKIN Z5 CHEVRON BLK/GREY (NO CORD)|
|LAMKIN Z5 GENESIS CHEVRON RED CAP|
|SUPER STROKE CROSS COMFORT BLK/RED|
|SUPER STROKE CROSS COMFORT GRY/BLACK|
|SUPER STROKE CROSS COMFORT GRY/PINK WMS|
|SUPER STROKE S-TECH BLACK/WHITE|
|SUPER STROKE S-TECH BLUE/YELLOW|
|SUPER STROKE S-TECH GREY/BLACK|
|SUPER STROKE S-TECH RED/WHITE|
|WINN DRI-TAC CHEV BLACK WMS|
|WINN DRI-TAC DARK GREY|
|WINN DRI-TAC GREY WMS|
|WINN EXCEL WRAP BLACK|