Callaway Rogue ST Max Custom Driver

ALDILA NV GREEN (NXT) 65 features the same constant taper design to a smooth and stable feel shot after shot.

ALDILA NVS ORANGE (NXT)  which uses up to twice as ultra-thin layers of premium grade carbon fiber material, to eliminate unwanted gaps and “dead zones” that can occur during the manufacturing process. MLT enhances feel and eliminate inconsistent shots cause by shaft variability.

ALDILA ROGUE WHITE 130 MSI pushes the limits of performance with the use of extremely high modulus, 130 M.S.I. Graphitic Carbon Fibers to provide the ultimate in performance from a Mid Launch, Low Spin profile.

ALDILA ROUGE SILVER 130 MSI offers unmatched performance and consistency through the use of advanced, extremely high modulus, Graphitic Carbon Fibers that provide performance characteristics never before available in a golf shaft.

Dumina AutoFlex The shaft automatically optimize the transfer of energy despite different swing speeds. Increases the head speed while providing stable swing posture and distance.

CALLAWAY RCH 45 

CALLAWAY RCH 55 

CALLAWAY RCH 65 

CALLAWAY RCH 75 

FUJIKURA AIR SPEEDER 40 unites stability and speed in an ultra-lightweight profile through Fujikura’s use of proprietary materials and construction techniques. Unique lightweight design enhances swing speeds and ball speeds that generate more carry distance and longer drives.

FUJIKURA ATMOS TS BLACK is geared towards the performance golfer looking to keep the ball flighted down with low spin.

FUJIKURA ATMOS TS BLUE is the culmination of key learnings from more than two decades of tour-driven products. The development of ATMOS Tour Spec was an extensive process by which critical player feedback and fitting needs were at the forefront.

FUJIKURA MOTORE X F1 Designed for faster, more aggressive swing types. Stiffened tip and mid sections create a powerful and penetrating, low-mid trajectory with low-mid spin.

FUJIKURA MOTORE X F3 Designed for smooth and moderate swing types. Firm tip and mid sections produce a mid-high trajectory for longer carry distances with mid spin.

FUJIKURA PRO 2.0 features a more effective loading zone to store more energy in the downswing which translates to more clubhead speed.

FUJIKURA SPEEDER NX product to integrate Variable Torque in its design, utilizing premium materials to refine twisting stiffness in specific regions along the core of the shaft.

FUJIKURA VENTUS BLACK a multi-material bias core construction technique that delivers ultimate stability through transition and impact (maximizing clubhead MOI) – increasing velocity and smash factor.

FUJIKURA VENTUS BLUE designed to significantly tighten shot dispersion and maximize ball speed especially on off-center shots. Ventus is a Tour-inspired profile and the first to include Fujikura’s all-new VeloCore Technology in an accelerated taper, ultra-stiff tip profile.

FUJIKURA VENTUS RED great candidate for a fairway wood shaft and those less aggressive swingers of the club, looking for smooth feel and increased carry distance.

GDI TOUR AD DI is designed to provide golfers with more power and stability in a golf shaft. Designed and manufactured exclusively at the Graphite Design factory headquarters in Japan, the Tour AD DI shafts are available in 50g R2(Lite), R1(Regular) and S flex, 60g SR (Stiff Regular), S and X flex, 70g S, X and TX (Tour X-Stiff) flex, 80g S, X and TX flex and 90g X flex.

GDI TOUR AD BB is designed to promote a low/mid launch angle and lower ball spin. Designed and manufactured exclusively at the Graphite Design factory headquarters in Japan, the Tour AD BB is available in 50g R2(Lite), R1(Regular) and S flex, 60g SR(Stiff Regular), S and X flex, 70g S and X flex and 80g S and X flex.

GDI TOUR AD HD series is a shaft that maximizes the head performance of large and high moments of inertia, which is the mainstream of wood today.

GDI TOUR AD IZ introduces the latest in the Tour AD premium line of golf shafts, the Graphite Design Tour AD IZ – “ Into the Zone” . Designed and manufactured at the Graphite Design Japan factory headquarters, the new Tour AD IZ wood shaft has a very stealthy look to it in black with white/orange accents and a sleek new matte finish.

GDI TOUR AD TP utilizes a brand new technology called “Fast Taper Technology” or FTT. This new technology incorporates a faster taper rate from the lower mid-section to the tip of the shaft.

GDI TOUR AD VR shaft also utilizes FTT -Fast Taper Technology, which incorporates a faster taper rate from the grip to the lower mid-section of the shaft, providing the overall feeling of greater club head control at impact and an increase in club head speed.

GDI TOUR AD XC shaft profile is softer in the butt section, stiff in the center section and has a stiff tip to promote low/mid launch angle and low spin with the ball.

KBS TD WOOD SHAFT 50 has the characteristics of the original KBS feel, efficiency, and optimization of spin and launch that the KBS product line is known for.

KBS TD WOOD SHAFT 60 It is a Mid Launch/Low Spin Performance Graphite golf shaft that optimizes the maximum performance and efficiency of spin and launch angles at various swing speeds.

KBS TD WOOD SHAFT 70 Designed for performance, optimizing spin rate and launch for more distance and more consistent, tighter ball flights.

LAGP LA GOLF SHAFTS TRONO 65 designed with a highly unique EI profile to achieve extreme stability and control while still providing outstanding feel and optimal launch conditions for the modern high ball speed player.

MCA DIAMANA BF-SERIES incorporates high-strength DIALEAD™ Pitch Fiber by Mitsubishi Chemical into the butt-section of the shaft, adding unprecedented strength and control during shaft loading and unloading.

MCA DIAMANA ZF-SERIES feature moderately stronger, more stable butt and tip sections with a slightly softer and more active middle section. This produces a shaft that is incredibly solid during shaft loading and unloading, and at impact, but with smoother energy transfer and easier acceleration throughout the swing.

MCA FUBUKI MV-SERIES 45 focused point of increased density helps build the swing momentum needed to make a full turn, providing a fast-swinging, lightweight feel while straightening a fade or even producing a slight draw.

MCA GRAND BASSARA 39 is finished with an ultra-premium Ion Plating (IP) with a jet black dye, and sophisticated holographic decal.

MCA MMT WOOD  feature the same Metal Mesh Technology (MMT™), but strategically adapted to maximize performance within the lighter and thinner-walled structure of Driver/Hybrid shafts versus Irons.

MCA TENSEI AV-XLINK BLUE Our revolutionary Xlink Tech™ Resin system has been incorporated into the existing popular TENSEI™ AV Blue structure. The result is a significantly more carbon-rich structure that increases strength without sacrificing durability.

MCA TENSEI AV-XLINK WHITE able to increase strength of the shaft without compromising elsewhere. It also features MCA’s widely known Aluminum Vapor in the handle section to provide added stability and improved power transfer. Built with a strengthened tip to promote a lower, more penetrating trajectory and low spin.

MCA TENSEI CK PRO BLUE incorporates three times the Carbon Fiber/DuPont™ Kevlar® (CK) weave in the butt-section – providing enhanced stability and maximum feel.

MCA TENSEI CK PRO ORANGE This first of it’s kind bend profile for MCA GOLF uses a counter-balanced design along with an extreme tip-stiff design to provided added versatility for the stronger player.

MCA TENSEI CK PRO WHITE which features a multi-material design that incorporates more performance-oriented materials than we’ve ever used in a shaft.

PADERSON KEVLAR GREEN BALLISTIC 70 series features the worlds only continuous fiber filament wound kevlar construction technology.