Cobra King 3D Printed Putter 2021

AGERA

We partnered with HP to design the first family of 3D printed multi-material putters to take MOI and stability to the next level. The KING Agera putter features an oversize mallet shape, and a multi-material construction using a 3D printed nylon lattice, forged aluminum, tungsten, and SIK Face Technology to create our most forgiving putter in the family.

AGERA ARMLOCK

An armlock setup increases consistency by eliminating any variations in shaft angle through the putting stroke. A longer length and an oversize grip allows the user to rest the grip and shaft against their lead forearm for maximum stability.

3D PRINTED AGERA

• Hosel: Single Bend
• Length(s): 34", 35"
• Toe Hang: 0°
• Stroke/Player Type: Straight back and straight through putting strokes

3D PRINTED AGERA ONE LENGTH

• Hosel: Single Bend
• Length(s): 37.50"
• Toe Hang: 0°
• Stroke/Player Type: For players with straight back and straight through strokes that desire a taller posture at address.

3D PRINTED AGERA ARMLOCK

• Hosel: Single Bend
• Length(s): 41"
• Toe Hang: 0°
• Stroke/Player Type: A armlock single bend setup promotes the most consistent stroke for players that like to rest the grip and shaft against their lead forearm.

3D PRINTED LATTICE CARTRIDGE

An intricate 3D printed nylon lattice cartridge optimizes the weight distribution within the putter head to create the highest MOI possible for more consistent and predictable rolls.

STEEL CHASSIS

A 261g steel chassis lowers the center of gravity and adds structural stability to support the other components.

FORGED ALUMINUM CROWN

A lightweight 27g forged aluminum crown creates discretionary weight to position more mass around the perimeter to increase MOI.

TUNGSTEN WEIGHTING

53 grams worth of tungsten weighting is combined in the forward and rear heel and toe extremeties to maximize stability on off-center putts for increased consistency.

SIK FACE TECHNOLOGY

We partnered with SIK Golf and Bryson Dechambeau to design the most accurate putter face possible. Each aluminum face insert features SIK Golf's patented Descending Loft Technology (DLT) that utilizes four descending lofts to ensure the most consistent roll and launch angle for a variety of putting strokes and attack angles.

GRANDSPORT-35

We partnered with HP to design the first family of 3D printed multi-material putters to take MOI and stability to the next level. The KING Grandsport-35 putter features an oversize blade shape, and a multi-material construction using a 3D printed nylon lattice, forged aluminum, tungsten, and SIK Face Technology to create our most forgiving and accurate blade style putter.

GRANDSPORT-35 - STANDARD

• Lengths: 34", 35"
• Toe Hang: 35°
• Stroke & Player Type: Slight arc putting strokes.

GRANDSPORT-35 - STANDARD

• Lengths: 41"
• Toe Hang: 45°
• Stroke & Player Type: An armlock single bend setup promotes the most consistent stroke for players that desire to rest the grip and shaft against their lead forearm.

3D PRINTED NYLON CARTRIDGE

An intricate 3D printed nylon lattice cartridge optimizes the weight distribution within the putter head to create the highest MOI possible in a blade shape for more consistent and predictable rolls.

STEEL CHASSIS

A 304g steel chassis lowers the center of gravity and adds structural stability to support the other components.

FORGED ALUMINUM CROWN

A lightweight 21g forged aluminum crown frees up discretionary weight to position more mass around the perimeter to increase MOI.

TUNGSTEN WEIGHTING

30 grams worth of tungsten weighting is combined in the heel and toe to maximize stability on off-center putts for increased consistency.

SIK FACE TECHNOLOGY

We partnered with SIK Golf and Bryson DeChambeau to design the most accurate putter face possible. Each aluminum face insert features SIK Golf's patented Descending Loft Technology (DLT) that utilizes four descending lofts to ensure the most consistent roll and launch angle for a variety of putting strokes and attack angles.

SUPERNOVA

We partnered with HP to design the first family of 3D printed multi-material putters to take MOI and stability to the next level. The KING Supernova putter features an oversize fang shape, and a multi-material construction using a 3D printed nylon lattice, forged aluminum, tungsten, and SIK Face Technology to create our most forgiving and accurate fang style putter.

OFFERING & HOSEL TYPE

The KING 3D Printed SUPERNOVA is a high MOI fang putter available in a single bend hosel designed for players with straight back and through putting strokes that desire added stability in an oversized shape.

3D PRINTED NYLON CARTRIDGE

An intricate 3D printed nylon lattice cartridge optimizes the weight distribution within the putter head to create the highest MOI possible in a blade shape for more consistent and predictable rolls.

STEEL CHASSIS

A 261g steel chassis lowers the center of gravity and adds structural stability to support the other components.

FORGED ALUMINUM CROWN

A lightweight 18g forged aluminum crown creates discretionary weight to position more mass around the perimeter to increase MOI.

TUNGSTEN WEIGHTING

42 grams worth of tungsten weighting is combined in the forward and rear heel and toe extremeties to maximize stability on off-center putts for increased consistency.

SIK FACE TECHNOLOGY

We partnered with SIK Golf and Bryson Dechambeau to design the most accurate putter face possible. Each aluminum face insert features SIK Golf's patented Descending Loft Technology (DLT) that utilizes four descending lofts to ensure the most consistent roll and launch angle for a variety of putting strokes and attack angles.

A REVOLUTION IS HERE

Introducing our first 3d printed putter created in partnership with hp and sik golf. a fully 3d printed design and sik face technology deliver the next level in putter performance.

A COLLABORATION BETWEEN COBRA & HP

COBRA partnered with HP to launch the first commercialized putter created using HP Metal Jet Technology. Metal Jet 3D printing is a revolutionary advancement in manufacturing and introduces new and innovative possibilities for golf club design and performance.

ULTIMATE DESIGN FREEDOM

HP's Metal Jet technology provides greater adaptability in design than traditional manufacturing methods, and allows us to prototype, test and bring products to market much faster.

A SUPERIOR FINAL PRODUCT

HP's Metal Jet technology provides greater adaptability in design than traditional manufacturing methods, and allows us to prototype, test and bring products to market much faster.

3D PRINTED STEEL BODY

The entire putter body and hosel is 3D printed using 316 stainless steel. Once printed, the head part is sintered at a high temperature to form the final product. Due to the precision of Metal Jet Printing, minimal post-process finishing is required.

3D PRINTED LATTICE DESIGN

Utilizing 3D printing enables our engineers to integrate a complex lattice structure into the design that can't be produced using casting or forging. The lattice optimizes weight distribution to create the highest MOI in blade shape while fine-tuning feel.

CNC MILLED FOR PRECISION

During the final step in the process, the surfaces of the 3D printed head are CNC machined to apply the final cosmetic finishing, and ensure the most precise final product.

SIK FACE TECHNOLOGY

COBRA has partnered with SIK Golf to utilize their patented Descending Loft Technology (DLT) to deliver the most consistent and accurate roll.

SIK DESCENDING LOFT TECHNOLOGY

The face design features SIK Golf’s patented Descending Loft Technology (DLT), which utilizes four descending lofts (4°, 3°, 2°, 1°) that ensures the most consistent roll for a variety of putting strokes. Whether you forward press, or hit the ball high or low on the face, the technology maintains a proper launch angle on every putt.

ALUMINUM FACE INSERT

A soft aluminum face insert produces better sound and feel while providing excellent feedback and distance control for improved putting accuracy.

PUTT SMARTER WITH COBRA CONNECT

Each putter is equipped with a Cobra Connect Smart Grip and an embedded sensor that syncs with the Arccos Caddie app on your smart device. Download Arccos Caddie to pair your putter and start receiving in-depth, strokes gained analysis. With the purchase of every putter, you will receive a 90-day free trial to Arccos Caddie and the opportunity to redeem additional sensors for the rest of your clubs!