null

Cobra King Cobra Custom Wedge With Snakebite Grooves

SKU : SAM0176
$149.00
Earn up to 0 reward points from this purchase! See Details
Online and store prices may vary.

Cobra King Cobra Custom Wedge With Snakebite Grooves

The KING COBRA Wedge features a nostalgic throwback KING COBRA, reminiscent of the rich history and evolution of the brand. The wedge features a new SNAKEBITE groove design (in traditional & full face groove lengths) that is engineered to maximize spin and fittingly produce more ‘BITE’ around the greens.


KING COBRA WEDGE WITH SNAKEBITE GROOVES

The KING COBRA Wedge features a new SNAKEBITE Groove design that is engineered with sharper and deeper grooves to maximize spin and fittingly produce more ‘BITE’ around the greens.

FEATURES

SNAKEBITE GROOVE TECHNOLOGY


40% SHARPER GROOVES

A new SNAKEBITE groove design uses a re-engineered cutting method that replaces tools more frequently to tighten groove tolerances, maximize groove volume, and create the sharpest and most accurate groove possible. The new design results in 11% deeper grooves and 40% sharper groove edges to impart maximum spin on the ball.

PROGRESSIVE GROOVE TECHNOLOGY


TRADITIONAL GROOVES

GROOVE SHAPE : Narrow & Deep
LOFTS: 48°, 50°, 52°, 54°
PERFORMANCE : Traditional grooves are narrower and deeper to optimize spin on lower lofted wedges that are used with a square or delofted face.

FULL-FACE GROOVE

GROOVE SHAPE : Wide & Shallow
LOFTS: 56°, 58°, 60°
PERFORMANCE : Wider and shallower full-face grooves that extend to the toe create more spin on shots with an open face when the ball is more likely to make contact with the toe area.

GRIND IT OUT


VERSATILE

Performance
Heel and toe relief provides versatility to play shots with an open face, while a center notch keeps the leading edge closer to the ground without adding effective bounce.

Swing Type:
Shallow / Neutral / Digger

Turf Conditions:
Medium / Firm

WIDELOW GRIND

Performance
A wide, low bounce sole works its magic out of soft bunkers and medium rough, preventing the leading edge from digging.

Swing Type:
Neutral / Digger

Turf Conditions:
Soft / Medium

CLASSIC GRIND

Performance
A medium-width sole with high bounce and trailing edge relief works well for neutral to steeper swings and a variety of course conditions. With minimal heel and toe relief, this grind is best suited for full swing and longer pitch shots.

Swing Type:
Neutral / Digger

Turf Conditions:
Soft / Medium / Firm

Cobra King Cobra Custom Wedge With Snakebite Grooves Product Specs

Loft Bounce Grind Lie Offset (mm) Steel Shaft Length
(with CONNECT Grip)
Steel Shaft Length
(with Standard Grip)
Swing Weight Stock Flex RH/LH
48° Versatile 64.0° 1.0 36.00" 35.75" D2 Stiff RH
50° Versatile 64.0° 1.0 36.00" 35.75" D2 Stiff RH
52° Versatile 64.0° 1.0 36.00" 35.75" D3 Stiff RH/LH
52° 12° Classic 64.0° 1.0 36.00" 35.75" D3 Stiff RH
54° 10° Versatile 64.0° 1.0 37.75" 35.50" D4 Stiff RH
56° Widelow 64.0° 1.0 35.75" 35.50" D4 Stiff RH
56° 10° Versatile 64.0° 1.0 35.75" 35.50" D4 Stiff RH/LH
56° 12° Classic 64.0° 1.0 35.75" 35.50" D4 Stiff RH
58° Widelow 64.0° 1.0 35.50" 35.25" D4 Stiff RH
58° Versatile 64.0° 1.0 35.50" 35.25" D4 Stiff RH
60° Widelow 64.0° 1.0 35.50" 35.25" D4 Stiff RH
60° Versatile 64.0° 1.0 35.50" 35.25" D4 Stiff RH/LH
60° 11° Classic 64.0° 1.0 35.50" 35.25" D4 Stiff RH

Note: This is for your reference only and does not denote the content of the product.

KBS Hi-Rev 2.0 - Shaft
Model Flex Shaft Weight Kick Point Trajectory Spin Tip Diameter
KBS Hi-Rev 2.0 (125g) Stiff 125g High Low Low 0.355
COBRA Lamkin Crossline Connect (Black) - Grip

Cobra King Cobra Custom Wedge With Snakebite Grooves Shafts

Aerotech

Aerotech SteelFiber i110cw are a nice option for the player looking for the smooth and consistent feel of graphite with a ball flight similar to a steel shaft.

 

Aerotech SteelFiber i70cw The lightest SteelFiber shaft in our lineup is a great shaft for those slower swing speed players looking to raise ball flight and gain as much yardage as possible.

 

Aerotech SteelFiber i80cw gives a player all of the benefits of a 100% golf graphite shaft but with unprecedented control and consistency for a shaft in this weight category.

 

Aerotech SteelFiber i95cw is the perfect transition into a lighter weight shaft which allows a player to see some good improvement in distance and vibration reduction while maintaining pinpoint accuracy and incredibly consistent distance control.

 
Model Flex Weight (g) Torque Kick Point
Aerotech SteelFiber i110cw R, S 110, 110 1.9-1.5, 2.1-1.7 Mid, Mid
Aerotech SteelFiber i70cw R 70 3.4-2.8 Mid/Low
Aerotech SteelFiber i80cw R, S 85, 85 2.9-2.5, 2.9-2.5 Mid, Mid
Aerotech SteelFiber i95cw R, S 95, 95 2.4-2.0, 2.5-2.1 Mid, Mid
KBS

KBS S-Taper Black PVD Engineered to provide superior feel while maintaining shot workability for players seeking a mid-launch and low to mid spin shaft.

 

KBS S-Taper Chrome provides superior feel while maintaining shot workability and tight dispersion for players seeking the ultimate tour shaft with Mid trajectory and Low Spin performance.

 

KBS 610 shaft delivers a lower, more penetrating ball flight with controlled spin. This wedge-specific shaft allows skilled players to produce knock-down and other workable shots into and around the green.

 

KBS C-Taper Inspired by Tour player feedback, the KBS C-TAPER shaft is designed for players requiring a low piercing trajectory and superior shot control.

 

KBS C-Taper Lite shaft incorporates proven KBS performance benefits in a lighter weight design.

 

KBS C-Taper Lite Matte Black shaft incorporates proven KBS performance benefits in a lighter weight design. The firm tip and soft butt produce a mid-high trajectory and controlled spin.

 

KBS C-Taper Matte Black  shaft maximizes energy transfer, for a crisp feel, while optimizing shaft diameters in the taper and tip areas for low trajectory and spin control. Independent testing proves the C-TAPER shaft to average 5% more distance versus the market leader as well.

 

KBS Hi-Rev 2.0 features an active tip section that increases the effective loft of the club head, delivering a higher ball launch with more spin for added stopping power and accuracy.

 

KBS Tour Steel iron shaft is perfect for club builders and players who want to customize the shaft's effect on ball spin and ball flight.

 

KBS Tour 105 fills the much needed gap between the Tour and Tour 90 models, a slightly lighter weight shaft, all while providing precision distance and control in a shaft that players have grown accustomed to with the KBS Golf Shafts.

 

KBS Tour 90 .355T Delivers optimum stability resulting in efficient energy transfer from the players hands to the clubhead. Perfect for club builders and players who want to customize the shaft’s effect on ball spin and ball flight.

 

KBS Tour-V is a lightweight product that features larger outer diameters, resulting in a stable tip section and tight shot dispersion. For players that prefer a lighter weight shaft and less ball spin, the KBS TOUR-V is the ideal shaft option. The TOUR-V is the newest addition to the KBS line.

 
Model Flex Weight (g) Torque Kick Point
KBS $ Taper Black R, S, X 110, 120, 130 - -
KBS $ Taper Chrome R, S, X 110, 115, 125, 130 - -
KBS 610 S, S+ 120, 125 - -
KBS C-Taper R, S, X 110, 120, 130 Low, Low, Low High, High, High
KBS C-Taper 95 R, S 105, 110 - -
KBS C-Taper Lite R, X 105, 115 -, Low -, Mid
KBS C-Taper Lite Matte Black R, X 105, 115 - -
KBS C-Taper Matte Black X 130 - -
KBS Hi-Rev 2.0 R, S, X 115, 125, 135 - -
KBS Tour R, R+, S, S+, X 110, 115, 120, 125, 130 - -
KBS Tour 105 R, S, X 105, 110, 115 - -
KBS Tour 90 Steel R, S 95, 102 - -
KBS Tour-V R, S, X 100, 110, 120 Low, Low, Low Mid, Mid, Mid
Mitsubishi

Mitsubishi MMT 85 utilizes a patent pending Metal Mesh Technology (MMT) to redefine the possibilities for feel and performance in a composite iron shaft.

 

Mitsubishi MMT 105 This improves density and stability, while also allowing for thinner overall composite wall construction. Together this yields a finely tuned, highly responsive shaft that still provides the consistent launch and spin control needed for effective iron play.

 
Model Flex Weight (g) Torque Kick Point
Mitsubishi MMT 85 R, S 84, 88 3.3, 3.2 Mid, Mid
Mitsubishi MMT 105 S, TX 105, 113 2.8, 2.8 Mid, Mid/High
Nippon

Nippon NS Pro 950 GH It features exceptional weight balance and control, with ultra-lightweight design comparable to graphite that makes it easier than ever to swing. And the use of new NSGS8665V alloy co-developed and patented with Nisshin Steel helped creaye a revolutionary combination of strength and weight balance.

 

Nippon NS Pro Modus 3 Tour 105 This magical marriage of “soft” and “hard” in the same shaft provides a combination of distance and accuracy that millions of golfers around the globe – including more than 100 touring professionals – have found difficult to resist.

 

Nippon NS Pro Modus 3 Tour 120 Softer butt section with a longer stiffer tip section to help create a softer feel while keeping controllability.

 

Nippon NS Pro Modus 3 Tour 130 most challenging professional courses can be attacked from setup to finish with confidence, thanks to the optimized trajectory, distance and direction. This outstanding shaft enables true power shots with pin-point accuracy in all conditions.

 

Nippon NS Pro Modus3 Wedge 115 

 

Nippon NS Pro Modus3 Wedge 125 

 
Model Flex Weight (g) Torque Kick Point
Nippon NS Pro 950 GH R., S 94.5, 98 2.0, 1.8 Mid, Mid
Nippon NS Pro Modus 3 Tour 105 R, S, X 103, 106.5, 112 1.9, 1.7, 1.6 Grip, Grip, Grip, Grip
Nippon NS Pro Modus 3 Tour 120 S, X 114, 120 - -
Nippon NS Pro Modus 3 Tour 130 S, X 124, 129 - -
Nippon NS Pro Modus3 Wedge 115 S 122 1.5 Mid
Nippon NS Pro Modus3 Wedge 125 S 133 1.3 Mid
Project X

Project X deliver penetrating trajectory and ball flight and strike the perfect balance of unrivaled distance, stability and control for golf’s most serious players.

 

Project X LZ Steel features proprietary Loading Zone Technology which produces maximum shaft load during the downswing for 7% greater energy transfer to the ball at impact for more distance.

 
Model Flex Weight (g) Torque Kick Point
Project X 5.5, 6.0, 6.5 115, 120, 125 - -
Project X LZ Steel 5.0, 5.5, 6.0, 6.5 110, 115, 120, 125 - -
True Temper

TT Dynamic Gold 105 allows for the control and accuracy expected from the Dynamic Gold brand while adding distance due to increased clubhead speed.

 

TT Dynamic Gold 120 shaft delivers the tour-caliber accuracy of Dynamic Gold in a lighter weight steel shaft. Stronger players will experience a similar profile and launch as Dynamic Gold in a shaft that is easier to swing.

 

TT AMT Tour White / Black PVD is the middle weight option in the new AMT range and delivers a mid-high trajectory and spin. Featuring Ascending Mass Technology, AMT Black gets progressively heavier as golfers move from their long irons to short irons. This allows for increased speed and launch from the lightweight long irons and superior control and precision from the midweight scoring clubs.

 

TT Dynamic Gold AMT AMT stands for Ascending Mass Technology, which means the steel shaft's weight increases in 3 gram increments from the 3-iron to PW, while the balance point is adjusted so that the swing weight is consistent to standard Dynamic Gold throughout the set.

 

TT Dynamic Gold This high-flex, tour-weight steel golf shaft is designed for skilled players seeking a low, penetrating ball flight for optimum control and accuracy.

 

TT Dynamic Gold Tour Issue shaft delivers the tour-caliber accuracy of Dynamic Gold in a lighter weight steel shaft. Stronger players will experience the exact same profile and launch as Dynamic Gold with slightly lower spin and a shaft that is easier to swing.

 
Model Flex Weight (g) Torque Kick Point
TT Dynamic Gold 105 R300, S300, X100 101, 103, 105 - -
TT Dynamic Gold 120 R300, S300, X100 116, 118, 120 - -
TT AMT Tour White / Black PVD R, S, X 102-127, 106-130 - High, High
TT Dynamic Gold AMT R, S, X 102-127, 106-130, 106-130 - -
TT Dynamic Gold R300, S200, S300, S400, X100 127, 127, 130, 134, 130 - -
TT DG Tour Issue S400, X100 132, 130 Low, Low High, High
UST

UST Mamiya Recoil 110 With UST Mamiya’s exclusive Recoil™ technology, we have brought feel back into the shaft, while allowing players to hit a wide range of shots that result in better distance control and pin seeking accuracy.

 

UST Mamiya Recoil 95 golfers looking for great feel, Tour control and Stability in a lightweight design.

 
Model Flex Weight (g) Torque Kick Point
UST Mamiya Recoil 110 S, X 105, 107 3.8, 3.6 -
UST Mamiya Recoil 95 R, S, X 90, 90, - 4.1, 4.1, - -

Cobra King Cobra Custom Wedge With Snakebite Grooves Grips

Cobra
Model Image
RAD Lamkin - Crossline Cobra Connect - Black
RAD One Lamkin - Crossline Cobra Connect - Black/Blue
Cobra - Lamkin - Crossline Connect - Black
Golf Pride
Model Image
Golf Pride - CP2 Pro
Golf Pride - CP2 Wrap
Golf Pride - MCC - Align - Black/White
Golf Pride - MCC Align Plus 4 - Gray/Black
Golf Pride - MCC Plus 4 - Gray
Golf Pride - MCC Plus 4 Connect - Gray
Golf Pride - MultiCompound - Black/Black
Golf Pride - MultiCompound - Black/White
Golf Pride - Tour Velvet Full Cord - Black
Golf Pride - Tour Velvet - Black
Golf Pride - Tour Velvet 360 Connect - Black
Golf Pride - Tour Velvet ALIGN Connect - Black
Golf Pride - Tour Velvet ALIGN - Black/Red
Golf Pride - Tour Velvet Connect - Black
Golf Pride - Tour Velvet Plus4 - Black
Golf Pride - Tour Wrap 2G - Black
Golf Pride - Tour Wrap 2G - White
Golf Pride - Z-Grip Cord - Black
Jumbo Max
Model Image
Jumbo Max - Connect - Str8 Tech - Black
Jumbo Max - Tour Series - Black
Jumbo Max - Ultralite
Lamkin
Model Image
Lamkin - Crossline ACE Connect - Black
Lamkin - Sonar - Black - Undersize
Lamkin - Sonar - Black
Lamkin - Sonar Connect - Black/Blue
Lamkin - Sonar Wrap Connect - Black/Blue
Lamkin - ST 2 Hybrid - Black
Lamkin - ST 2 Hybrid Calibrate - Black
Lamkin - X-Line Cord Connect - Black/White
Winn
Model Image
Winn - Dritac 2.0 - Black
Winn - Dritac 2.0 - Black - Midsize
Winn - Dritac 2.0 - Black - Oversize
 

Specification

Construction Finish MSRP
Cast N/A $149.00
MAIP
ADDRESS: 19950 E. WALNUT DR. N. WALNUT CA 91789