
The KING COBRA ONE Length Wedge is designed at 37.50” to complement a ONE Length iron setup. A ONE Length configuration promotes a repeatable setup and swing for increased consistency and accuracy while a new SNAKEBITE full-face groove design enhances spin around the green.
A new SNAKEBITE groove design uses a re-engineered cutting method that replaces tools more frequently to tighten groove tolerances, maximize groove volume, and create the sharpest and most accurate groove possible. The new design results in 11% deeper grooves, and 40% sharper groove edges to impart maximum spin on the ball.
Wide & Shallow
56°, 58°, 60°
Wider and shallower full-face grooves that extend to the toe create more spin on shots with an open face when the ball is more likely to make contact with the toe area.
Loft | Bounce | Grind | Lie Angle | Offset (MM) | Length (Arccos grip adds .25" in custom) |
Swing Weight | Stock Flex | RH/LH |
48° | 8° | Versatile | 62.5° | 1.0 | 37.25" | D1.5 | S | RH |
52° | 8° | Versatile | 62.5° | 1.0 | 37.25" | D1.5 | S | RH/LH |
54° | 10° | Versatile | 62.5° | 1.0 | 37.25" | D1.5 | S | RH |
56° | 10° | Versatile | 62.5° | 1.0 | 37.25" | D1.5 | S | RH/LH |
60° | 8° | Versatile | 62.5° | 1.0 | 37.25" | D1.5 | S | RH/LH |
This is for your reference only and does not denote the content of the product.
Model | Flex | Shaft Weight | Kick Point | Trajectory | Spin | Tip Diameter |
KBS Hi-Rev 2.0 (125g) | Stiff | 125g | High | Low | Low | 0.355 |
Construction | Finish | MSRP |
Cast | N/A | $159.00 |