
The KING COBRA Wedge features a nostalgic throwback KING COBRA, reminiscent of the rich history and evolution of the brand. The wedge features a new SNAKEBITE groove design (in traditional & full face groove lengths) that is engineered to maximize spin and fittingly produce more ‘BITE’ around the greens.
The KING COBRA Wedge features a new SNAKEBITE Groove design that is engineered with sharper and deeper grooves to maximize spin and fittingly produce more ‘BITE’ around the greens.
A new SNAKEBITE groove design uses a re-engineered cutting method that replaces tools more frequently to tighten groove tolerances, maximize groove volume, and create the sharpest and most accurate groove possible. The new design results in 11% deeper grooves and 40% sharper groove edges to impart maximum spin on the ball.
GROOVE SHAPE : Narrow & Deep
LOFTS: 48°, 50°, 52°, 54°
PERFORMANCE : Traditional grooves are narrower and deeper to optimize spin on lower lofted wedges that are used with a square or delofted face.
GROOVE SHAPE : Wide & Shallow
LOFTS: 56°, 58°, 60°
PERFORMANCE : Wider and shallower full-face grooves that extend to the toe create more spin on shots with an open face when the ball is more likely to make contact with the toe area.
Performance
Heel and toe relief provides versatility to play shots with an open face, while a center notch keeps the leading edge closer to the ground without adding effective bounce.
Swing Type:
Shallow / Neutral / Digger
Turf Conditions:
Medium / Firm
Performance
A wide, low bounce sole works its magic out of soft bunkers and medium rough, preventing the leading edge from digging.
Swing Type:
Neutral / Digger
Turf Conditions:
Soft / Medium
Performance
A medium-width sole with high bounce and trailing edge relief works well for neutral to steeper swings and a variety of course conditions. With minimal heel and toe relief, this grind is best suited for full swing and longer pitch shots.
Swing Type:
Neutral / Digger
Turf Conditions:
Soft / Medium / Firm
Loft | Bounce | Grind | Lie | Offset (mm) | Steel Shaft Length (with CONNECT Grip) |
Steel Shaft Length (with Standard Grip) |
Swing Weight | Stock Flex | RH/LH |
48° | 8° | Versatile | 64.0° | 1.0 | 36.00" | 35.75" | D2 | Stiff | RH |
50° | 8° | Versatile | 64.0° | 1.0 | 36.00" | 35.75" | D2 | Stiff | RH |
52° | 8° | Versatile | 64.0° | 1.0 | 36.00" | 35.75" | D3 | Stiff | RH/LH |
52° | 12° | Classic | 64.0° | 1.0 | 36.00" | 35.75" | D3 | Stiff | RH |
54° | 10° | Versatile | 64.0° | 1.0 | 35.75" | 35.50" | D4 | Stiff | RH |
56° | 7° | Widelow | 64.0° | 1.0 | 35.75" | 35.50" | D4 | Stiff | RH |
56° | 10° | Versatile | 64.0° | 1.0 | 35.75" | 35.50" | D4 | Stiff | RH/LH |
56° | 12° | Classic | 64.0° | 1.0 | 35.75" | 35.50" | D4 | Stiff | RH |
58° | 6° | Widelow | 64.0° | 1.0 | 35.50" | 35.25" | D4 | Stiff | RH |
58° | 8° | Versatile | 64.0° | 1.0 | 35.50" | 35.25" | D4 | Stiff | RH |
60° | 4° | Widelow | 64.0° | 1.0 | 35.50" | 35.25" | D4 | Stiff | RH |
60° | 8° | Versatile | 64.0° | 1.0 | 35.50" | 35.25" | D4 | Stiff | RH/LH |
60° | 11° | Classic | 64.0° | 1.0 | 35.50" | 35.25" | D4 | Stiff | RH |
Note: This is for your reference only and does not denote the content of the product.
Model | Flex | Shaft Weight | Kick Point | Trajectory | Spin | Tip Diameter |
KBS Hi-Rev 2.0 (125g) | Stiff | 125g | High | Low | Low | 0.355 |
Construction | Finish | MSRP |
Cast | N/A | $149.00 |