HONMA Beres 08 Aizu Iron Set
Beautiful Traditional Japanese "AIZU" Lacquer Design
The premium BERES brand provides world-class quality and performance, and now collaborates with the traditional Japanese AIZU lacquer, originating in the northern part of Japan close to the Honma Sakata factory.
Technology
3D L-CUP Structure(#5-#9)
High repulsion performance due to the 3D L-CUP structure and sole slots improve the initial ball speed. A thicker sole design ensures the ultra-low center of gravity to deliver a high launch angle.
Sole Slot
The inside and outside sole slots generate high repulsion, and the outside toe slot provides high repulsion performance on off center strikes at toe end.
Face Structure
Repulsion performance is improved by reducing the thickness of the iron face, and vertical slits reinforce the impact area to provide strength and durability, delivering forgiveness and a stable shot
Optimal Cavity Structure
By enlarging the lower part of the cavity, an increased deep low CG design is realised. By progressively changing the cavity design by loft, the ideal trajectory for each club is achieved.
Original Shaft -ARMRQ MX-
The newly developed "10-axis sheet" material consists of 4-axis aluminum and 6-axis carbon material. High compression strength and by adopting "ARMOR" on the bat side, a consistent swing trajectory is realized. Furthermore, the counter balance design effect improves the swing speed. By increasing the strength of the shaft sheet, it is possible to produce accurate shots with a constant swing path.
Performance by Grade
As the star level increases, the stability on off-center strikes increases.
Performance by Grade
The shaft accelerates the head speed at impact in stages, by adopting different materials for each grade.
HONMA Beres 08 Aizu Iron Set Product Specs
| Model | Loft (deg.) #5/21 | Loft (deg.) #6/24 | Loft (deg.) #7/27 | Loft (deg.) #8/31 | Loft (deg.) #9/35 | Loft (deg.) #10/40 | Loft (deg.) #11/45 | Loft (deg.) AW/50 | Loft (deg.) SW/55 | |
| ARMRQ MX 3S | R2 | ※ | ※ | ※ | ※ | ※ | ※ | ※ | ※ | ※ |
| R | C-9 / 348 | C-9 / 354 | C-9 / 360 | C-9 / 366 | C-9 / 372 | C-9 / 378 | C-9 / 380 | C-9 / 380 | D-0 / 389 | |
| SR | D-0 / 353 | D-0 / 359 | D-0 / 365 | D-0 / 371 | D-0 / 377 | D-0 / 383 | D-0 / 385 | D-0 / 385 | D-1 / 394 | |
| S | D-0 / 356 | D-0 / 362 | D-0 / 368 | D-0 / 374 | D-0 / 380 | D-0 / 386 | D-0 / 388 | D-0 / 388 | D-1 / 397 | |
| ARMRQ MX 2S | R2 | C-9 / 348 | C-9 / 354 | C-9 / 360 | C-9 / 366 | C-9 / 372 | C-9 / 378 | C-9 / 380 | C-9 / 380 | D-0 / 389 |
| R | C-9 / 348 | C-9 / 354 | C-9 / 360 | C-9 / 366 | C-9 / 372 | C-9 / 378 | C-9 / 380 | C-9 / 380 | D-0 / 389 | |
| SR | D-0 / 353 | D-0 / 359 | D-0 / 365 | D-0 / 371 | D-0 / 377 | D-0 / 383 | D-0 / 385 | D-0 / 385 | D-1 / 394 | |
| S | D-0 / 356 | D-0 / 362 | D-0 / 368 | D-0 / 374 | D-0 / 380 | D-0 / 386 | D-0 / 388 | D-0 / 388 | D-1 / 397 | |
| ARMRQ MX 4S | R2 | ※ | ※ | ※ | ※ | ※ | ※ | ※ | ※ | ※ |
| R | C-9 / 348 | C-9 / 354 | C-9 / 360 | C-9 / 366 | C-9 / 372 | C-9 / 378 | C-9 / 380 | C-9 / 380 | D-0 / 389 | |
| SR | D-0 / 353 | D-0 / 359 | D-0 / 365 | D-0 / 371 | D-0 / 377 | D-0 / 383 | D-0 / 385 | D-0 / 385 | D-1 / 394 | |
| S | D-0 / 356 | D-0 / 362 | D-0 / 368 | D-0 / 374 | D-0 / 380 | D-0 / 386 | D-0 / 388 | D-0 / 388 | D-1 / 397 | |
| ARMRQ MX 5S | R2 | ※ | ※ | ※ | ※ | ※ | ※ | ※ | ※ | ※ |
| R | C-9 / 348 | C-9 / 354 | C-9 / 360 | C-9 / 366 | C-9 / 372 | C-9 / 378 | C-9 / 380 | C-9 / 380 | D-0 / 389 | |
| SR | D-0 / 353 | D-0 / 359 | D-0 / 365 | D-0 / 371 | D-0 / 377 | D-0 / 383 | D-0 / 385 | D-0 / 385 | D-1 / 394 | |
| S | ※ | ※ | ※ | ※ | ※ | ※ | ※ | ※ | ※ | |
| Lie Angle (deg.) | 61 | 61.5 | 62 | 62.5 | 63 | 63 | 63 | 63 | 64 | |
| Offset(mm) | 4 | 3.7 | 3.5 | 3.5 | 3.5 | 3.5 | 3 | 3 | 2 | |
| Length(inch) | 38.25 | 37.75 | 37.25 | 36.75 | 36.25 | 35.75 | 35.5 | 35.5 | 35 |
Note: this is for your reference only and does not denote the content of the product.
BERES AIZU IRON - SHAFT 2S
| Model | Flex | Length(mm) | Weight(g) | Torque(°) | Tip Diameter(㎜) | Butt Diameter(㎜) | Kick-Point |
| ARMRQ MX 2S | R2 | 965 | 48 | 4.95 | 9.3 | 14.5 | Mid-Low |
| R | 965 | 50 | 4.9 | 9.3 | 14.5 | Mid-Low | |
| SR | 965 | 53 | 4.81 | 9.3 | 15.3 | Mid-Low | |
| S | 965 | 56 | 4.71 | 9.3 | 15.4 | Mid-Low |
BERES AIZU IRON - SHAFT 3S
| Model | Flex | Length(mm) | Weight(g) | Torque(°) | Tip Diameter(㎜) | Butt Diameter(㎜) | Kick-Point |
| ARMRQ MX 3S | R2 | 965 | 48 | 4.55 | 9.3 | 14.5 | Mid-Low |
| R | 965 | 50 | 4.5 | 9.3 | 14.5 | Mid-Low | |
| SR | 965 | 53 | 4.41 | 9.3 | 15.3 | Mid-Low | |
| S | 965 | 56 | 4.31 | 9.3 | 15.4 | Mid-Low |
BERES AIZU IRON - SHAFT 4S
| Model | Flex | Length(mm) | Weight(g) | Torque(°) | Tip Diameter(㎜) | Butt Diameter(㎜) | Kick-Point |
| ARMRQ MX 4S | R2 | 965 | 48 | 4.35 | 9.3 | 14.5 | Low |
| R | 965 | 50 | 4.3 | 9.3 | 14.5 | Low | |
| SR | 965 | 53 | 4.21 | 9.3 | 15.3 | Low | |
| S | 965 | 56 | 4.11 | 9.3 | 15.4 | Low |
BERES AIZU IRON - SHAFT 5S
| Model | Flex | Length(mm) | Weight(g) | Torque(°) | Tip Diameter(㎜) | Butt Diameter(㎜) | Kick-Point |
| ARMRQ MX 5S | R2 | 965 | 48 | 4.2 | 9.3 | 14.5 | Low |
| R | 965 | 50 | 4.15 | 9.3 | 14.5 | Low | |
| SR | 965 | 53 | 4.06 | 9.3 | 15.3 | Low | |
| S | 965 | 56 | 3.96 | 9.3 | 15.4 | Low |
GR HONMA RUBBER 41 GD
| Model | Material | Weight (g) | Size |
| GR HONMA RUBBER 41 GD | RUBBER | 41.0 | 60 |
Specification
| Construction | Iron Back | MSRP |
| Forged | Cavity Back | $44,550.00 |