Maximum Distance Performance can never be achieved if you increase Speed.
To raise the overall Performance level, a combination of "Distance and Forgiveness" is required.
?Loft Angle Design??11.5°?12.5°??For more forgiveness and high trajectory
?Keel Weight Design?3?)??For a comfortable swing and easy ball-striking
Instantly generate repulsion for more speed.
Increase gear effect on off-centre hits and correct trajectory.
The increased repulsion coupled with an expanded repulsion area on the face boost ball speed.ace boost ball speed.
The radial face minimises power loss and delivers high initial velocity; even on off-centre hits and especially at the bottom of the face.
Draw-biased design achieved by placing a tungsten weight at the rear heel side delivers added forgiveness and assists true striking.
The spine is set at six o'clock on all clubs to stabilise shaft movement and retain consistency through the set.
The HONMA original system enables to adjust lie, loft, and face angle without rotating or detaching the shaft, by using attached torque wrench.
The angle adjustment system provides the consistent shaft performance in combination with P-SAT, even if changing the angles.
|Loft(deg)||Head Material||Length (inch)||Head Volume (cm3)||Lie Angle||Swing Weight / Total Weight (g)||Speedtuned 42|
|11.5||Body & Face: Ri811 / Casting Face: Ti6-4 / Rolling||43.75||460||59.5||-||C3/277||*|
Note: This is for your reference only and does not denote the content of the product.
The midpoint of the shaft flexes perfectly to generate a faster swing speed. This speed is efficiently transmitted to the ball through a more rigid tip and produces fast initial velocity.
|Model||Flex||Length (mm)||Weight (g)||Torque (°)||Tip Diameter (mm)||Butt Diameter (mm)||Kick-Point|
|Honma Rubber 37 GY / WH||Rubber||37||A59|
|ClubHead Volume||Club Length||Headcover||Wrench||Interchangeable Shaft||MSRP|