null

Mizuno ST-G 220 Custom Driver

SKU : EMI0388
$499.95
Earn up to 0 reward points from this purchase! See Details
Online and store prices may vary.

Mizuno ST-G 220 Custom Driver

A player’s deeper profile with the ball speed of Mizuno’s Forged BETA Ti SAT2041 clubface - and unmatched levels of adjustability for precise fitting. The ST-G now has shorter lateral weight tracks - allowing a new center/back weight port. The combination of three tracks and two moveable weights enable the ST-G to morph from ultra-low spinning bomber to a highly playable mid-spinning option – with fade or draw bias in both.

Features
  • Modern player’s profile: Deeper faced, shorter back to front, but using the full capacity 460cc head size
  • New multi-thickness cortech face: Refined to maximize the return from Mizuno’s Beta Ti face. Ball speeds most noticeably improved low on the clubface
  • New dual weight center slot: Allows 2 central back weights for deeper CG capability - higher stability, launch and spin
  • Greater draw / fade bias: Increased separation between lateral weight tracks
  • Consistently solid feedback: A tighter range of feel and sound across the weight settings
  • Quick switch adjustability: 4 degrees of loft adjustability to fine-tune look and trajectory

Mizuno ST-G 220 Custom Driver Product Specs

Model Loft Range° Lie Range CC Length (inch) Dexterity
ST-G 9.0 7-11 56.5-59.5 460 45 RH Only

Note: This is for your reference only and does not denote the content of the product.

Mizuno ST-G 220 Custom Driver Shafts

Fujikura

Fujikura ATMOS Blue 5 The ATMOS has a consistent, smooth feel and is the red launch profile to signify the higher flight and spin and the blue profile for mid launch and spin performance.

 

Fujikura ATMOS Red Featuring Proprietary FUEL ROD Technology, Phantium Finish Paint Technology, Generate More Power and Speed, Guaranteed to Increase Distance.

 

Fujikura ATMOS TS Black has a similar design profile to the Tour Spec version, but is geared towards fitting a wider spectrum of golfers. The ATMOS has a consistent, smooth feel and is the red launch profile to signify the higher flight and spin and the blue profile for mid launch and spin performance.

 

Fujikura Ventus Black a multi-material bias core construction technique that delivers ultimate stability through transition and impact (maximizing clubhead MOI) – increasing velocity and smash factor.

 

Fujikura Ventus Blue designed to significantly tighten shot dispersion and maximize ball speed especially on off-center shots. Ventus is a Tour-inspired profile and the first to include Fujikura’s all-new VeloCore Technology in an accelerated taper, ultra-stiff tip profile.

 

Fujikura Motore X F3 features a reinforced bias core with a torsionally stiffened handle section that promotes faster ball speeds combined with thin layers of full-length bias plies that create a balanced torsional strength for stability.

 
Model Flex Weight (g) Torque Kick Point
Fujikura ATMOS Blue 5 R, S 55, 55 4.6, 5.0 -
Fujikura ATMOS Blue 6 R, S 65, 65 4.8, 4.5 -
Fujikura ATMOS Red 5 R2 57 5.1 -
Fujikura ATMOS Red 6 R2, R 65, 65 5.1, 5.0 -
Fujikura ATMOS TS Black 6 S, X 65, 69 3.4 Mid/High, High
Fujikura ATMOS TS Black 7 S 74 3.0 High
Fujikura Ventus Black 6 S 64 3.4 -
Fujikura Ventus Black 7 X 78 2.8 -
Fujikura Ventus Blue 6 S 65 3.1 -
Fujikura Ventus Blue 7 X 77.5 2.9 -
Fujikura Motore X F3 50 R2, R, S 57, 58, 59 5.2, 4.9, 4.6 -
Fujikura Motore X F3 60 R, S, X 67, 68, 69 4.5, 4.3, 4.1 -
Fujikura Motore X F3 70 S, X 76, 77 4.1, 3.9 -
Graphite Design

Graphite Design Tour AD - DI shaft is designed to provide more power and stability. The Tour AD DI manufactured exclusively at Graphite Design Japan has been integrated with Toray Company's new Nanomaterial technology in the tip section of the shaft. This unique technology allows the player to create an epic IMPACT on ball speed while still providing exceptional feel and control.

 

Graphite Design Tour AD - XC shaft profile is softer in the butt section, stiff in the center section and has a stiff tip to promote low/mid launch angle and low spin with the ball.

 
Model Flex Weight (g) Torque Kick Point
Graphite Design Tour AD - DI S, X 65, 75 - -
Graphite Design Tour AD - XC S, X 64, 75 - -
Mitsubishi

Mitsubishi Bassara E 42 utilized the latest innovations in design and materials to produce an ultra-lightweight shaft with unmatched performance, stability, and feel.

 

Mitsubishi Diamana Ltd D White The next generation Diamana™ D+PLUS™ Limited Edition incorporates Mitsubishi Chemical’s own DIALEAD™ Pitch Fiber into the butt-section of this new design to deliver maximum stability and increase energy transfer in our time tested and tour proven “low launch” White Board profile.

 

Mitsubishi Diamana Ltd M Red adds their proprietary DIALEAD Pitch Fiber to this series. The ultra-high strength 80T fiber in the butt section reduces torque and slightly counter balances the shaft. The result is improved stability and energy transfer at impact. M+ Red 50 is a high launch model.

 

Mitsubishi Diamana Ltd S Blue The next generation Diamana™ S+PLUS™ Limited Edition incorporates Mitsubishi Chemical’s own DIALEAD™ Pitch Fiber into the butt-section of this new design to deliver enhanced stability and increase energy transfer in the time tested and tour proven “smooth” Blue Board profile.

 

Mitsubishi Tensei Blue features a multi-material design that optimizes classic, tour-proven MCA GOLF bend profiles in much the same manner as racecar designs use exotic materials to enhance performance and efficiency.

 

Mitsubishi Tensei CK Pro Orange builds off of MCA GOLF’s classic, smooth bend profile and incorporates the same Carbon Fiber/DuPont™ Kevlar® (CK) weave found in the butt-section of all TENSEI™ CK shafts – providing enhanced stability and maximum feel, in an extremely versatile design.

 

Mitsubishi Tensei CK Pro White builds off of MCA GOLF’s classic tip-stiff, low-launch bend profile preferred by stronger players, and incorporates the same Carbon Fiber/DuPont™ Kevlar® (CK) weave in the butt-section as TENSEI™ CK Blue – providing enhanced control, stability and feel.

 

Mitsubishi Tensei Orange TENSEI CK Orange has a unique counter balanced design for player's looking to fine-tune their golf club performance.

 

Mitsubishi Tensei White Incorporates CarbonFiber/Dupont™ Kevlar® weave in the butt section providing enhanced control, stability and feel.

 
Model Flex Weight (g) Torque Kick Point
Mitsubishi Bassara E 42 L 43 6.8 Mid
Mitsubishi Diamana Ltd D+  White 60 S 61 3.5 Mid/High
Mitsubishi Diamana Ltd D+  White 70 S, X 70, 72 3.2, 2.9 High, High
Mitsubishi Diamana Ltd M+  Red 50 R 48 5.8 Mid
Mitsubishi Diamana Ltd S+  Blue 60 S 64 4.2 Mid
Mitsubishi Tensei Blue 50 A 53 6.4 Mid
Mitsubishi Tensei Blue 60 R, S 64, 67 4.6, 4.5 Mid, Mid
Mitsubishi Tensei Blue 70 S, X 76, 78 4.0, 3.9 Mid, Mid
Mitsubishi Tensei CK Pro Orange 60 S, TX 64, 67 3.0, 3.0 High, High
Mitsubishi Tensei CK Pro Orange 70 S, TX 72, 74 3.0, 3.0 High, High
Mitsubishi Tensei CK Pro White 60 S, TX 62, 68 3.9, 3.9 High, High
Mitsubishi Tensei CK Pro White 70 S, TX 73, 77 3.3, 3.2 High, High
Mitsubishi Tensei Orange R, S 55, 57 6.0, 5.9 -
Mitsubishi Tensei White S, X 76, 80 4.1, 4.0 -
Mizuno

Mizuno M Fusion - Regular 

 
Model Flex Weight (g) Torque Kick Point
Mizuno M Fusion R 39.5 7.55 -
Project X

Project X HZRDUS Smoke Black RDX has teamed up with Hexcel, a global leader in composites technology for aerospace and military operations, to utilize their HexTow® carbon fibers.

 

Project X HZRDUS Smoke Green designed to reduce spin for the strongest swingers and is the first major shaft introduced using Hexcel’s HexTow HM63 fiber.

 

Project X HZRDUS Smoke Yellow is a low launch/spin shaft that features a counterbalanced design allowing for mass to be added to the head for maximum ball speeds and higher MOI.

 
Model Flex Weight (g) Torque Kick Point
Project X HZRDUS Smoke Black RDX 60 5.5, 6.0, 6.5 58, 58, 59 4.0, 3.5, 3.5 -
Project X HZRDUS Smoke Black RDX 70 6.0, 6.5 67, 69 3.5, 3.5 -
Project X HZRDUS Smoke Green 60 6.0 61 3.3 -
Project X HZRDUS Smoke Green 70 6.5 72 3.2 -
Project X HZRDUS Smoke Yellow 60 6.0 67 3.5 -
Project X HZRDUS Smoke Yellow 70 6.5 79 2.9 -
True Temper

True Temper Riptide CB features Torsional Stability Optimization which allows for an extremely stable shaft while maintaining the signature smooth EvenFlow feel.

 
Model Flex Weight (g) Torque Kick Point
TT Riptide CB 40 5.0 45 5.0 -
TT Riptide CB 50 5.0, 5.5, 6.0 52, 54, 55 4.9, 4.9, 4.9 -
TT Riptide CB 60 6.0, 6.5 62, 62 3.9, 3.8 -

Mizuno ST-G 220 Custom Driver Grips

Golf Pride
Model Image
Golf Pride CP2 Wrap 60 Round
Golf Pride CP2 Wrap
Golf Pride J112 60 Round (WOODS ONLY)
Golf Pride M31 360 Round
Golf Pride M31 360 Lady Scuba Blue
Golf Pride MCC 60 RND (BLK/WHT)
Golf Pride MCC Align 60 Rib
Golf Pride MCC Blue Black 60 Round
Golf Pride MCC 60 RND (BLK/WHT)
Golf Pride MCC Plus 4 Align 60
Golf Pride MCC Plus 4 Blue
Golf Pride MCC Plus 4 Grey
Golf Pride Tour Velvet 360 60 Round
Golf Pride Tour Velvet Align 60
Golf Pride Tour Velvet
Golf Pride Tour Wrap 2G
Golf Pride Tour Wrap 60 Round
Golf Pride Tour Wrap WHITE 60 Round
Golf Pride Tour Velvet Full Cord Black 58 RND
Golf Pride Tour Velvet Plus4
Golf Pride Tour Velvet Round
Golf Pride Z Cord 60 Round
Golf Pride Z Grip Align
Lamkin
Model Image
Lamkin Crossline 58 Round
Lamkin Hy Mid Calibrate
Lamkin Hybrid
Lamkin Hybrid Calibrate
Lamkin Sonar Tour Round
Lamkin TS1 Plus Round
Winn
Model Image
Winn DRI-TAC Gray 60 Round
Winn DRI-TAC Gray
Winn DRI-TAC Lady
 

Specification

ClubHead Volume Club Length Headcover Wrench Interchangeable Shaft MSRP
460cc N/A Yes Yes Yes $499.95
NPIP
ADDRESS: 19950 E. WALNUT DR. N. WALNUT CA 91789