null

Mizuno ST-X 220 Custom Driver

SKU : EMI0403
$449.99
Earn up to 0 reward points from this purchase! See Details
Online and store prices may vary.

Mizuno ST-X 220 Custom Driver

Draw bias - mid spin

A confidence-inspiring, draw-biased driver with heel focused weight location. The ST-X will appeal to players seeking a higher, right to left ball flight. With higher spin rates than its ST-Z counterpart, the ST-X, will suit moderate swing speeds, needing help producing a more extended ball flight. A new 20-gram heel biased back weight creates a deeper centre of gravity for more efficient, longer drives - more often. Also available as a J-Spec option with ultra -lightweight HeLIUM Nano Core shaft for seniors and slower swing speeds.

Features
MORE PERFORMANCE. MORE OFTEN:

The ST-X delivers your optimum ‘more often’ through exceptional stability from off-centre strikes. An expansion of the carbon sole area by 40% and thinning out the Titanium portion. Alongside a near doubling of the stabilizing heel/back weight.

HIGH DRAW FLIGHT BIAS:

Mizuno’s X-Axis design - weight is focused deep in the heel, encouraging a higher draw bias flight.

SLIGHTLY ROUNDED PROFILE:

A rounded 460cc volume for higher launch and mid spin performance.

HIGHLY RESILIENT FORGED SAT2041 BETA TI FACE:

Maintains its characteristics and resists micro-fractures longer than the commonly used 6-4 Ti. Elevated though a multi-thickness CORTECH design for increased ball speeds.

ENGINEERED FOR ‘SOLID’ FEEL:

Mizuno’s Harmonic Impact Research identifies and isolates vibration patterns that elite players associate with a preferred ‘solid’ feel. Knowledge of exact, preferred vibrations allows Mizuno to build sound into the design.

OPTIMIZED WAVE SOLE:

Delivers an additional contribution to ball speeds, particularly from low on the clubface.

QUICK SWITCH ADJUSTABILITY:

With 4 degrees of loft adjustability to fine-tune launch and trajectory.

Mizuno ST-X 220 Custom Driver Product Specs

Model Loft Range Lie Length
ST-X 10.5 8.5-12.5° 57.5-60.5° 45”
ST-X 12.0 10.0-14.0° 59.0-62.0° 45”
ST-X 10.5 J Spec 8.5-12.5° 59.0-62.0° 45.75”
ST-X 12.0 J Spec 10.0-14.0° 59.0-62.0° 45.75”

Note: this is for your reference only and does not denote the content of the product.

Lamkin ST Hybrid 360

Mizuno ST-X 220 Custom Driver Shafts

Aldila

Aldila Ascent Red This unique enhancement – created by pairing a strategically-placed section of increased stiffness with a focused area of heavier, tungsten-infused prepreg – preserves the shaft’s lively feel and higher launch angle while maintaining stability and maximum energy transfer at impact.

 

Aldila Ascent Ultralite models also feature FlyDrive™ Technology – a new application inspired by a similar innovation in high-performance fly fishing rods. A unique, full-length Visco-Elastic Isolation Layer (VEIL) is added to improve overall strength and feel while bolstering the shaft’s resistance to “ovaling,” a common deficiency in thinner-walled designs.

 
Model Flex Weight (g) Torque Kick Point
Aldila Ascent Red 50 R, S 58, 61 5.7, 5.5 Mid, Mid
Aldila Ascent Red 60 S, X 65, 68 4.9, 4.8 Mid, Mid
Aldila Ascent Ultralite 40 R, R2 47, 44 8.2, 8.3 Low, Low
Fujikura

Fujikura ATMOS Blue The ATMOS has a consistent, smooth feel and is the red launch profile to signify the higher flight and spin and the blue profile for mid launch and spin performance.

 

Fujikura ATMOS Red Featuring Proprietary FUEL ROD Technology, Phantium Finish Paint Technology, Generate More Power and Speed, Guaranteed to Increase Distance.

 

Fujikura ATMOS TS Black has a similar design profile to the Tour Spec version, but is geared towards fitting a wider spectrum of golfers. The ATMOS has a consistent, smooth feel and is the red launch profile to signify the higher flight and spin and the blue profile for mid launch and spin performance.

 

Fujikura Ventus Black a multi-material bias core construction technique that delivers ultimate stability through transition and impact (maximizing clubhead MOI) – increasing velocity and smash factor.

 

Fujikura Ventus Blue designed to significantly tighten shot dispersion and maximize ball speed especially on off-center shots. Ventus is a Tour-inspired profile and the first to include Fujikura’s all-new VeloCore Technology in an accelerated taper, ultra-stiff tip profile.

 

Fujikura Motore X F3 features a reinforced bias core with a torsionally stiffened handle section that promotes faster ball speeds combined with thin layers of full-length bias plies that create a balanced torsional strength for stability.

 
Model Flex Weight (g) Torque Kick Point
Fujikura ATMOS Blue 5 R, S 55, 55 4.6, 5.0 -
Fujikura ATMOS Blue 6 R, S 65, 65 4.8, 4.5 -
Fujikura ATMOS Red 5 R2 57 5.1 -
Fujikura ATMOS Red 6 R2, R 65, 65 5.1, 5.0 -
Fujikura ATMOS TS Black 6 S, X 65, 69 3.4 Mid/High, High
Fujikura ATMOS TS Black 7 S 74 3.0 High
Fujikura Ventus Black 6 S 64 3.4 -
Fujikura Ventus Black 7 X 78 2.8 -
Fujikura Ventus Blue 6 S 65 3.1 -
Fujikura Ventus Blue 7 X 77.5 2.9 -
Fujikura Motore X F3 50 R2, R, S 57, 58, 59 5.2, 4.9, 4.6 -
Fujikura Motore X F3 60 R, S, X 67, 68, 69 4.5, 4.3, 4.1 -
Fujikura Motore X F3 70 S, X 76, 77 4.1, 3.9 -
Graphite Design

Graphite Design Tour AD - DI shaft is designed to provide more power and stability. The Tour AD DI manufactured exclusively at Graphite Design Japan has been integrated with Toray Company's new Nanomaterial technology in the tip section of the shaft. This unique technology allows the player to create an epic IMPACT on ball speed while still providing exceptional feel and control.

 

Graphite Design Tour AD - XC shaft profile is softer in the butt section, stiff in the center section and has a stiff tip to promote low/mid launch angle and low spin with the ball.

 
Model Flex Weight (g) Torque Kick Point
Graphite Design Tour AD - DI S, X 65, 75 - -
Graphite Design Tour AD - XC S, X 64, 75 - -
Mitsubishi

Mitsubishi Bassara E 42 utilized the latest innovations in design and materials to produce an ultra-lightweight shaft with unmatched performance, stability, and feel.

 

Mitsubishi Diamana Ltd D+ White The next generation Diamana™ D+PLUS™ Limited Edition incorporates Mitsubishi Chemical’s own DIALEAD™ Pitch Fiber into the butt-section of this new design to deliver maximum stability and increase energy transfer in our time tested and tour proven “low launch” White Board profile.

 

Mitsubishi Diamana Ltd M+ Red adds their proprietary DIALEAD Pitch Fiber to this series. The ultra-high strength 80T fiber in the butt section reduces torque and slightly counter balances the shaft. The result is improved stability and energy transfer at impact. M+ Red 50 is a high launch model.

 

Mitsubishi Diamana Ltd S+ Blue The next generation Diamana™ S+PLUS™ Limited Edition incorporates Mitsubishi Chemical’s own DIALEAD™ Pitch Fiber into the butt-section of this new design to deliver enhanced stability and increase energy transfer in the time tested and tour proven “smooth” Blue Board profile.

 

Mitsubishi Tensei AV Raw Blue RAW finish reveals the Aluminum Vapor (AV) Coated Weave in the butt section, a visible cue of the added stability this unique weave provides. Power transfers straight from the hands through the ball for a consistent, mid-launching flight.

 

Mitsubishi Tensei CK Pro Orange builds off of MCA GOLF’s classic, smooth bend profile and incorporates the same Carbon Fiber/DuPont™ Kevlar® (CK) weave found in the butt-section of all TENSEI™ CK shafts – providing enhanced stability and maximum feel, in an extremely versatile design.

 

Mitsubishi Tensei CK Pro White builds off of MCA GOLF’s classic tip-stiff, low-launch bend profile preferred by stronger players, and incorporates the same Carbon Fiber/DuPont™ Kevlar® (CK) weave in the butt-section as TENSEI™ CK Blue – providing enhanced control, stability and feel.

 
Model Flex Weight (g) Torque Kick Point
Mitsubishi Bassara E 42 L 43 6.8 Mid
Mitsubishi Diamana Ltd D+  White 60 S 61 3.5 Mid/High
Mitsubishi Diamana Ltd D+  White 70 S, X 70, 72 3.2, 2.9 High, High
Mitsubishi Diamana Ltd M+  Red 50 R 48 5.8 Mid
Mitsubishi Diamana Ltd S+  Blue 60 S 64 4.2 Mid
Mitsubishi Tensei AV Raw Blue 55 R 57 5.4 Mid
Mitsubishi Tensei AV Raw Blue 65 R, S 65, 67 4.4, 3.9 Mid, Mid
Mitsubishi Tensei AV Raw Blue 75 S, X 77, 78 3.9, 3.4 Mid, Mid
Mitsubishi Tensei CK Pro Orange 60 S, TX 64, 67 3.0, 3.0 High, High
Mitsubishi Tensei CK Pro Orange 70 S, TX 72, 74 3.0, 3.0 High, High
Mitsubishi Tensei CK Pro White 60 S, TX 62, 68 3.9, 3.9 High, High
Mitsubishi Tensei CK Pro White 70 S, TX 73, 77 3.3, 3.2 High, High
Mizuno

Mizuno M Fusion - Regular 

 
Model Flex Weight (g) Torque Kick Point
Mizuno M Fusion R 39.5 7.55 -
Project X

Project X Evenflow Riptide CB designed with improved stability that builds on the widely successful "even bend" profile to provide unmatched feel and maximum energy transfer, also features Torsional Stability Optimization which allows for an extremely stable shaft while maintaining the signature smooth EvenFlow feel.

 

Project X HZRDUS Smoke Black RDX has teamed up with Hexcel, a global leader in composites technology for aerospace and military operations, to utilize their HexTow® carbon fibers.

 

Project X HZRDUS Smoke Blue RDX To make the best, you have to use the best. Project X has teamed up with Hexcel®, a global leader in composites technology for aerospace and military operations, to utilize their HexTow® carbon fibers.

 

Project X HZRDUS Smoke RDX Blue PVD a counterbalanced design that features a soft midsection to maximize shaft load and feel while maintaining a stout butt and tip section to keep up with all swing speeds and provide a stable feel through impact.

 
Model Flex Weight (g) Torque Kick Point
Project X Evenflow Riptide CB 40 5.0 45 5.0 -
Project X Evenflow Riptide CB 50 5.0, 5.5, 6.0 52, 54, 55 4.9, 4.9, 4.9 -
Project X Evenflow Riptide CB 60 5.5, 6.0, 6.5 62, 62, 62 4.0, 3.9, 3.8 -
Project X HZRDUS Smoke Black RDX 60 5.5, 6.0, 6.5 58, 58, 59 4.0, 3.5, 3.5 -
Project X HZRDUS Smoke Black RDX 70 6.0, 6.5 67, 69 3.5, 3.5 -
Project X HZRDUS Smoke Blue RDX 60 5.5, 6.0, 6.5 64, 64, 64 4.2, 3.4, 3.4 -
Project X HZRDUS Smoke Blue RDX 70 6.0, 6.5 75, 75 3.2, 3.2 -
Project X HZRDUS Smoke RDX Blue PVD 60 5.5, 6.0, 6.5 64, 64, 64 4.2, 3.4, 3.4 -
Project X HZRDUS Smoke RDX Blue PVD 70 6.0, 6.5 75, 75 3.2, 3.2 -
UST

UST Helium Nanocore 40 Ultra High Performance lightweight golf shaft design, featuring our new Nanocore Technology for increased clubhead speed. Innovative materials and design profile stabilize shaft flexural and torsional characteristics in harmony with the ultra light weight design to optimize shaft performance and consistency with precise feel.

 
Model Flex Weight (g) Torque Kick Point
UST Helium Nanocore 40 F1, F2 43, 45 6.3, 6.3 -

Mizuno ST-X 220 Custom Driver Grips

Golf Pride
Model Image
Golf Pride CP2 Wrap
Golf Pride J112 60 Round (WOODS ONLY)
Golf Pride M31 360 Round
Golf Pride M31 360 Lady Scuba Blue
Golf Pride M31 58 Round
Golf Pride MCC 60 RND (BLK/WHT)
Golf Pride MCC Align 60 Rib
Golf Pride MCC 60 RND (BLK/WHT)
Golf Pride MCC Plus 4 Align 60
Golf Pride MCC Plus 4 Blue
Golf Pride MCC Plus 4 Grey
Golf Pride MCC Teams Black Grey 60 Round
Golf Pride MCC Teams Blue White 60 Round
Golf Pride Tour Velvet 360 60 Round
Golf Pride Tour Velvet Align 60
Golf Pride Tour Velvet
Golf Pride Tour Wrap 2G
Golf Pride Tour Wrap 60 Round
Golf Pride Tour Wrap WHITE 60 Round
Golf Pride Tour Velvet Plus4
Golf Pride Tour Velvet Round
Golf Pride Z Cord 60 Round
Golf Pride Z Grip Align
Lamkin
Model Image
Lamkin Crossline 58 Round
Lamkin Hy Mid Calibrate
Lamkin Hybrid
Lamkin Hybrid Calibrate
Lamkin Sonar Tour Round
Lamkin Sonar Wrap Round
Lamkin TS1 Plus Round
Winn
Model Image
Winn DRI-TAC Gray 60 Round
Winn DRI-TAC Gray Ladies
Winn DRI-TAC Gray
 

Specification

ClubHead Volume Club Length Headcover Wrench Interchangeable Shaft MSRP
460cc 45.75" Yes Yes Yes $449.99
NPIP
TEL: 1 (909) 771-1111
ADDRESS: 19950 E. WALNUT DR. N. WALNUT CA 91789