PING i525 Single Iron
A powerful new design engineered with a forged, maraging-steel face significantly increases speed and distance while providing a pleasing feel and sound. All packaged in a compact, players-style model perimeter weighted to elevate forgiveness and deliver long, towering shots that hit and hold the green.
Forged, Maraging Steel Face
The strength of the variable-thickness, maraging steel allows for a thinner, more dynamic face structure with an internal sole undercut in the 17-4 stainless steel body to increase flexing to launch shots faster and higher with predictability.
Extreme Weighting
Tungsten toe and shaft tip weights combine with a tiered, dynamic face structure to expand the perimeter weighting while preserving ball speed through greater face deflection for added distance and improved accuracy.
Pleasing Sound, Feel
Tungsten toe and shaft tip weights combine with a tiered, dynamic face structure to expand the perimeter weighting while preserving ball speed through greater face deflection for added distance and improved accuracy.
Micromax Grooves
A precision-milled groove pattern allows for tighter spacing and a geometry that results in an average of four extra grooves to reduce fliers in the short irons and preserve spin in the long irons for greater control and consistency.
Preferred Styling
The players-style blade length and offset with a modest topline create a clean, compact profile favored by discerning players. The hydropearl 2.0 finish repels water to ensure predictable, consistent performance from wet and dry conditions.
Stock Shafts
The Project X IO steel shaft is easy to load and lightweight, delivering medium trajectory and spin, a good fit for players with a moderate swing tempo. The PING Alta CB Slate graphite option delivers high launch with stability and a consistent feel.
PING i525 Single Iron Product Specs
| Club | Length | Loft | Power Spec Loft | Retro Spec Loft | lie angle | Offset | Bounce | Swingweight |
| 3-iron | 39 1/2" | 18.0° | 17.0° | 20.0° | 60.0° | 0.19" | 5.0° | D0 |
| 4-iron | 38 7/8" | 21.0° | 19.5° | 23.0° | 60.5° | 0.16" | 6.0° | D0 |
| 5-iron | 38 1/4" | 24.0° | 22.5° | 26.0° | 61.0° | 0.13" | 7.0° | D0 |
| 6-iron | 37 5/8" | 27.0° | 25.5° | 29.0° | 61.5° | 0.11" | 8.0° | D0 |
| 7-iron | 37" | 30.5° | 29.0° | 32.5° | 62.0° | 0.08" | 9.0° | D0 |
| 8-iron | 36 1/2" | 35.0° | 33.5° | 37.0° | 62.8° | 0.06" | 10.0° | D0 |
| 9-iron | 36" | 40.0° | 38.5° | 42.0° | 63.5° | 0.04" | 11.5° | D0.5 |
| PW | 35 1/2" | 45.0° | 44.0° | 47.0° | 64.1° | 0.02" | 13.0° | D2 |
| UW | 35 1/2" | 50.0° | 49.0° | 52.0° | 64.1° | 0.02" | 13.0° | D2 |
Note: This is for your reference only and does not denote the content of the product.
True Temper Project X IO Steel - Shaft
| Flex | Weight | Launch Angle |
| 5.5 | 97.0g | Mid-High |
| 6.0 | 102.0g | Mid |
| 6.5 | 107.0g | Mid-Low |
UST Recoil 780 ES SMAC Graphite - Shaft
| Flex | Weight | Launch Angle |
| 760 A (F2) | 59.0g | High |
| 780 R (F3) | 73.0g | High |
| 780 S (F4) | 78.0g | High |
Specification
| Construction | Iron Back | MSRP |
| Forged | Cavity Back | $200.00 |