null

TaylorMade Milled Grind 3 Chrome Custom Wedge

SKU : SAM0186
$179.99
Earn up to 0 reward points from this purchase! See Details
Online and store prices may vary.

TaylorMade Milled Grind 3 Chrome Custom Wedge

RAW TALENT. RAW SPIN.

Wedge technology has evolved. The new Milled Grind 3 features RAW Face Micro-Ribs, engineered for added face texture to deliver spin around the greens and added precision on partial shots.

CONSISTENT SPIN & RAW PERFORMANCE

There’s a reason RAW wedges are preferred by the game’s best players. The unplated material will rust over time to preserve consistent spin while also delivering better performance in wet conditions. With RAW Face Technology, only the face will rust while the rest of the head maintains a premium finish.

 
GREENSIDE PRECISION

All-new Raised Micro-Ribs provide added precision on challenging feel shots around the green. A more abrasive and textured surface area leads to better interaction between club face and ball on finesse shots.

 
MILLED CRAFTSMANSHIP

The milling process maximizes consistency, maintaining tolerance levels difficult for a human to repeat. The result is a precisely crafted grind on each and every wedge that produces optimal turf interaction and consistent performance.

 
 
 
 
 
 
RAW Face Technology
RAW Face Technology designed for increased spin and feel with sharper, narrower and deeper grooves in the face, as well as laser etched precision. The face rusts* over time, preserving spin properties and providing the time-honored look preferred by many Tour professionals.
* Extent and speed of club face rusting may vary.

Milled Grind 
Milled Grind wedges ensure precision where it matters most. The process maximizes consistency when crafting each sole for repeatable performance and turf interaction. 

ZTP-17 Groove
This groove features steep side walls and a sharp edge radius to maximize spin. 

Thick-Thin Design
By redistributing mass, we are able to optimize CG location for precise flight and enhanced feel. Raised Micro-Ribs
Raised Micro-Ribs are positioned between full grooves for added texture on the face. They are designed to increase spin and improve performance on shots around the green.

TaylorMade Milled Grind 3 Chrome Custom Wedge Product Specs

Club Loft Bounce Length Lie Hand Swing Weight Material Finish
LOW BOUNCE 56° 35.25" 64° RH D5 8620 Carbon Steel Chrome
LOW BOUNCE 58° 35" 64° RH/LH D5 8620 Carbon Steel Chrome
LOW BOUNCE 60° 35" 64° RH/LH D5 8620 Carbon Steel Chrome
STANDARD BOUNCE 46° 35.75" 64° RH/LH D3 8620 Carbon Steel Chrome
STANDARD BOUNCE 50° 35.5" 64° RH/LH D3 8620 Carbon Steel Chrome
STANDARD BOUNCE 52° 35.5" 64° RH/LH D3 8620 Carbon Steel Chrome
STANDARD BOUNCE 54° 11° 35.25" 64° RH/LH D5 8620 Carbon Steel Chrome
STANDARD BOUNCE 56° 12° 35.25" 64° RH/LH D5 8620 Carbon Steel Chrome
STANDARD BOUNCE 58° 11° 35" 64° RH/LH D5 8620 Carbon Steel Chrome
STANDARD BOUNCE 60° 10° 35" 64° RH/LH D5 8620 Carbon Steel Chrome
HIGH BOUNCE 52° 12° 35.5" 64° RH/LH D5 8620 Carbon Steel Chrome
HIGH BOUNCE 54° 13° 35.25" 64° RH D5 8620 Carbon Steel Chrome
HIGH BOUNCE 56° 14° 35.25" 64° RH/LH D5 8620 Carbon Steel Chrome
HIGH BOUNCE 58° 12° 35" 64° RH D5 8620 Carbon Steel Chrome
HIGH BOUNCE 60° 12° 35" 64° RH/LH D5 8620 Carbon Steel Chrome

Note: this is for your reference only and does not denote the content of the product.

Dynamic Gold Tour Issue Wedge - Shaft

Flex Weight (g) Torque Tip Size Launch Spin
S 129g 1.9 .355 Low Low
Crossline Black/Blue GEC - GRIP

Model Color Size Weight (g) Round/Reminder Butt Size Feel
Crossline 360 Black/Blue Standard 52g Round .580 Textured

TaylorMade Milled Grind 3 Chrome Custom Wedge Shafts

Aerotech

Aerotech SteelFiber fc 90 is inspired by the bend profile of the tour-winning SteelFiber i95, and is available in both taper tip and parallel tip configurations. All taper tip models are ‘Constant Weight’ therefore each shaft within the set weighs the same, regardless of length.

 

Aerotech SteelFiber i95 T With more PGA Tour wins than any other golf graphite iron shaft in history, the SteelFiber i95 is the perfect transition into a lighter weight shaft which allows a player to see some good improvement in distance and vibration reduction while maintaining pinpoint accuracy and incredibly consistent distance control.

 
Model Flex Weight (g) Torque Kick Point
Aerotech SteelFiber fc 90 R, S 95, 95 2.6-3.1, 2.4-2.9 -
Aerotech SteelFiber i95 R, S 85, 85 2.9, 2.8 -
KBS

KBS C-Taper Lite incorporates proven KBS performance benefits in a lighter weight design. The firm tip and soft butt produce a mid-high trajectory and controlled spin. Featuring a constant taper design and proportionate increase in wall thickness, the C-TAPER LITE optimizes energy transfer for maximum distance. Independent testing results revealed 5+ yards in added distance.

 

KBS C-Taper T shaft maximizes energy transfer, for a crisp feel, while optimizing shaft diameters in the taper and tip areas for low trajectory and spin control. Independent testing proves the C-TAPER shaft to average 5% more distance versus the market leader as well.

 

KBS Hi-REV 2.0 115g features an active tip section that increases the effective loft of the club head, delivering a higher ball launch with more spin for added stopping power and accuracy.

 

KBS Hi-Rev 2.0 120g features an active tip section that increases the effective loft of the club head, delivering a higher ball launch with more spin for added stopping power and accuracy.

 

KBS S Taper Chrome Engineered to provide superior feel while maintaining shot workability for players seeking a mid-launch and low to mid spin shaft.Shares the same bend profile as the KBS Tour shafts only with elongated step patterns to control spin, generating stable performance throughout the swing.

 

KBS S Taper Lite Chrome provides KBS signature superior feel while maintaining shot workability and tight dispersion for players seeking the ultimate tour shaft with mid/high trajectory and low/mid spin performance in a lighter weight performance frame.

 

KBS Tour FLT is proud to introduce the newest member of the KBS Golf Shaft Family; the KBS TOUR FLT. The KBS TOUR FLT is a Tour influenced shaft to fit the broadest range of players, from the Amateur Golfer, to a Tour Professional.Offering a lower ball flight for the 8 Iron and down clubs, and a higher ball flight for the 6 Iron and up, it accomplishes this while being longer and providing more spin, with the consistency and efficiency of more control.

 

KBS MAX MT 85  is a lightweight shaft for mid-high handicap players. It produces a high trajectory and spin rate for longer distance shots.

 

KBS Tour T progressive weight steel shafts are engineered with ‘moment of inertia’ analysis to increase stability. With a mid/high flex point, these shafts generate a penetrating ball flight and low to mid spin. The higher balance point produces lower swing weights.

 
Model Flex Weight (g) Torque Kick Point
KBS C-Taper Lite R, S, X 105, 110, 115 -, Low, Low -, Mid, Mid
KBS C-Taper T S, X 120, 130 2.0-1.8 Low, Low
KBS Hi-REV 2.0 115g Wedge Wedge 115 2.1 Mid
KBS Hi-Rev 2.0 120g Wedge Wedge 120 2.0 Mid
KBS S Taper Chrome S, X 120, 130 - -
KBS S Taper Lite Chrome R, S 95, 100 - -
KBS Tour FLT R, S, X 110, 120, 130 Low, Low, Low Mid-High, Variable, Variable
KBS MAX MT 85 R, S 102, 102 - -
KBS Tour S, X 120, 130 - -
Mitsubishi

Mitsubishi MMT Utilizes a breakthrough Metal Mesh material which is made from individually braded strands of 304 Stainless Steel that is integrated into the shaft’s prepreg layers toward the tip, MMT™ (Metal Mesh Technology) improves density and stability, while also allowing for thinner overall composite wall construction, yielding a finely tuned, highly responsive shaft.

 
Model Flex Weight (g) Torque Kick Point
Mitsubishi MMT A, R, S 62, 73, 86 5.9, 5.1, 3.7 -
Nippon

Nippon Modus 115 Blk shaft is a solid design, biult for optimum trajectory and accuracy whilst maintaining a great feel. This shaft will suit the stronger swing speed player seeking great fell and accuracy.

 

Nippon Modus Tour 120 T is a mid/heavy steel shaft with a stiffer tip and softer mid section to control trajectory and provide tight dispersion.

 

Nippon Modus Tour 130 T This shaft is ideal for the stronger player looking for a mid/low launch and spin shaft.

 

Nippon NS PRO 950 T Ever since its release, this top-selling model has been a favorite among golfers of all levels looking to take points off their scores. It features exceptional weight balance and control, with ultra-lightweight design comparable to graphite that makes it easier than ever to swing.

 

Nippon N.S. PRO Zeloz 6T was created in pursuit of a lighter, stronger, more tenacious steel shaft that would satisfy for a lifetime. The remarkable light weight was achieved by combining our state-of-the-art matching technology with NZNS 60, an original ZELOS material.

 

Nippon NS PRO 950 T Ever since its release, this top-selling model has been a favorite among golfers of all levels looking to take points off their scores. It features exceptional weight balance and control, with ultra-lightweight design comparable to graphite that makes it easier than ever to swing.

 

Nippon NS PRO 950GH neo These iron designs reduce spin and promotes harder landings for the amateur golfers. Therefore, we were required to make a new shaft to better match the times.

 

Nippon NS PRO Modus 105 T was first brought out to tour as the N.S. PRO MODUS³ PROTO ST in 2010 and was put in play immediately. The PROTO ST was in the winning bags of eight professionals since it’s launch and became the second most popular MODUS³ irons shafts on tour, just behind the N.S. PRO MODUS³ Tour 120.

 
Model Flex Weight (g) Torque Kick Point
Nippon Modus Tour 120 T S, X 114, 120 1.7, 1.6 Mid/High
Nippon Modus Tour 130 T S, X 124, 129 1.7-1.2, 1.6-1.2 Mid
Nippon N.S. PRO Zeloz 6T U 68.5 3.0 Tip
NipponNS PRO 950 R, S 94.5, 98 2.0, 1.8 Middle
Nippon NS PRO 950GH neo R, S 94.5, 98 - -
Nippon NS PRO Modus 105 T R, S 103, 106.5 1.9, 1.7 Grip
Project X

Project X IO increases in flex, it gets 5g heavier and is geometrically modified to launch lower–providing an individually optimized shaft for each flex.

 

Project X LS is the next evolution of the original Project X. It features an ultra-stable and stiff design that minimizes spin while providing a tight feel to keep up with even the strongest swingers on Tour.

 

Project X LZ incorporates Loading Zone technology by adding a series of small steps below the grip section of the classic tapered PX profile. This slightly softens the midsection and helps raise the trajectory slightly. The result is a stable, low/mid launching shaft with smooth feel.

 

Project X T deliver penetrating trajectory and ball flight and strike the perfect balance of unrivaled distance, stability and control for golf’s most serious players.

 
Model Flex Weight (g) Torque Kick Point
Project X IO 5.5 105 - -
Project X LS 6.5 125 - -
Project X LZ 5.5, 6.0, 6.5 115, 120, 125 2.0° - 1.7° -
Project X T 5.5, 6.0, 6.5 115, 120, 125 1.8° - 1.6° -
True Temper

TT Dynamic Gold 120 shaft delivers the tour-caliber accuracy of Dynamic Gold in a lighter weight steel shaft. Stronger players will experience the exact same profile and launch as Dynamic Gold in a shaft that is easier to swing.

 

TT Dynamic Gold 95 VSS featuring our VSS Pro technology for enhanced feel, Dynamic Gold 95 is perfect for players looking for the softest feeling shaft while still keeping the consistency, stability and durability that comes with steel.

 

TT Dynamic Gold S200 Wedge 

 

TT Dynamic Gold T This high-flex, tour-weight steel golf shaft is designed for skilled players seeking a low, penetrating ball flight for optimum control and accuracy.

 

TT Dynamic Gold Tour Issue provide the same power, control and the trademark penetrating ball flight associated with the entire series of Dynamic Gold irons shafts. The Tour Issue steel shafts have a Tour Only weight tolerance for custom precision fitting. The Dynamic Gold Tour Issue golf shafts are available in sets of eight (3-PW) and in S400 and X100 flexes, .355 only.

 

TT Dynamic Gold Tour Issue Wedge 

 

TT Dynamic Gold Wedge shaft is designed as a lightweight alternative to the #1 wedge shaft in the history of the game. For those who play a lightweight iron shaft, playing a lightweight wedge shaft only makes sense as it provides an ideal weight transition from your irons to wedges.

 

TT Elevate 95 VSS is a lightweight, high launching and spinning shaft that is designed to combat the "low spin" industry trend by increasing initial launch/spin to maximize carry distances and creating optimal land angles to hold more green.

 
Model Flex Weight (g) Torque Kick Point
TT Dynamic Gold 120 S300, X100 116, 118 - -
TT Dynamic Gold 95 VSS R300 95 - -
TT Dynamic Gold S200 Wedge Wedge 129 1.9 -
TT Dynamic Gold T S300, X100 103, 105 - -
TT Dynamic Gold Tour Issue S400, X100 132, 130 - -
TT Dynamic Gold Tour Issue Wedge S200 129 1.9 -
TT Elevate 95 VSS R, S 93, 94 - -
TT Dynamic Gold Wedge Wedge 115 - -
UST

UST Recoil 450 ESX T iron shafts are an evolution of the Recoil 450/460 ES models. Recoil ESX are designed to provide maximum distance and control for all golfers through the latest in design and materials.

 

UST Recoil 460 ESX T Recoil Technology provides optimal spring effect in the walls of the shaft and more efficient energy transfer to the ball for increased velocity and greater distance.

 

UST Recoil 760 SmacWrap Recoil Technology provides optimal spring effect in the walls of the shaft and more efficient energy transfer to the ball for increased velocity and greater distance.

 

UST Recoil 780 SmacWrap iron shafts are an evolution of the Recoil 760/780 ES models. These iron shafts are designed to provide maximum control and distance for all golfers through the latest in design and materials.

 

UST Recoil 95 iron shafts are for golfers looking for great feel, tour control, and stability in a lightweight design.

 

UST Recoil SmacWrap 65 Wedge Optimal spring effect in the walls of the shaft for efficient energy transfer to the ball for increased velocity and greater distance.

 
Model Flex Weight (g) Torque Kick Point
UST Recoil 450 ESX T L 52 4.2 -
UST Recoil 460 ESX T A 59 4.8 -
UST Recoil 760 SmacWrap A, R 67, 69 4.1, 4.1 -
UST Recoil 780 SmacWrap S 86 3.5 -
UST Mamiya Recoil 95 R, S 90, 90 4.1, 4.1 -
UST Recoil SmacWrap 65 Wedge R 65 3.7 -

TaylorMade Milled Grind 3 Chrome Custom Wedge Grips

Golf Pride
Model Image
Golf Pride CP2 Pro
Golf Pride CP2 Wrap
Golf Pride MCC 4 Align Black/Grey
Golf Pride MCC 4 Grey/Blk
Golf Pride MCC Align Black/White
Golf Pride MCC Plus 4
Golf Pride MCC Plus4 Grey/Red
Golf Pride New Decade Red-Black
Golf Pride New Decade White Black
Golf Pride Tour Velvet 360 Grey/Black
Golf Pride Tour Velvet Reminder
Golf Pride Tour Velvet
Golf Pride Tour Wrap 2G Black
Golf Pride Tour Wrap 2G White
Golf Pride Z Grip 360 Grey/Black
Golf Pride Z Grip Black
Golf Pride Z Grip Green
Golf Pride Z Grip Light Blue
Golf Pride Z Grip Orange
Golf Pride Z Grip Red
Golf Pride Z Grip Royal Blue
Golf Pride Z Grip Silver
Golf Pride Z Grip Yellow
Golf Pride ZGrip Blk/Gry.600(SIM Dr/Fwy)
Iomic
Model Image
Iomic Sticky 2.3 Black
Iomic Sticky 2.3 Blue/Black
Lamkin
Model Image
Lamkin CrossBlk/Gry.600Rem(SIMIr/Res)
Lamkin Crossline
Lamkin Crossline 360 Black/Grey
Lamkin Crossline Black/Red
Lamkin Crossline Black/Blue GEC (MG3)
Lamkin Dual Feel Ladies
Lamkin GENESIS Crossline Cord
Lamkin Players Cord
Lamkin SONAR Plus
Lamkin Sonar Wms Grey/White.580(SIM)
Lamkin SONAR Wrap
Lamkin ST Hybrid Mid
Lamkin ST Hybrid Std
Lamkin ST Hybrid with Calibrate Mid
Lamkin ST Hybrid with Calibrate Std
SuperStroke
Model Image
SuperStroke Cross Comfort
SuperStroke Traxion Tour
TaylorMade
Model Image
TaylorMade 360 Jr .590 Red
TaylorMade Tour Velvet TM Logo
Winn
Model Image
Winn DriTac 2.0 Ladies Black
Winn DriTac 2.0 Midsize Black
Winn DriTac 2.0 Oversize Black
Winn DriTac 2.0 Standard Black
Winn DriTac Black-Blue
Winn DriTac Black-Red
 

Specification

Construction Finish MSRP
Forged Chrome $179.99
NPIP
ADDRESS: 19950 E. WALNUT DR. N. WALNUT CA 91789