‚Äč

TaylorMade Milled Grind HI-Toe Big Foot Custom Wedge

SKU : SAM0085
$169.99
SHIPPING
Ships Directly From the Manufacturer. Please allow 3 - 7 business days for processing before shipment.
WARNING
All custom order items require 100% payment at the time the order is placed. Once you place a custom order, the sale is final. No cancellations or returns. Please review your order carefully and feel free to ask us any questions before placing your order. Thank you!
FOUND A CHEAPER PRICE?
Call Us @1-855-828-1009 and We Will Match It!

TaylorMade Milled Grind HI-Toe Big Foot Custom Wedge

Mythical Performance.

The Big Foot asymmetric C-Grind sole is flatter and wider at 32mm. Combined with an anti-dig leading edge, this enhances playability and ease of use from the sand and rough. The 15° high bounce has a trailing edge and heel relief, keeping the leading edge low and allowing for versatility on the greens or from the sand.

 
Deep CG Pockets

The enhanced sole pockets allow for redistribution of mass and are designed to increase spin and control.

 
HI-TOE Design

Increasing the toe height upwards of 5mm allows a higher center of gravity that was engineered for a lower launch and more spin.

 
Full Face Scoring Lines

Designed to ensure consistent ball contact out of the deep rough and increase spin on off-center strikes.

 

TaylorMade Milled Grind HI-Toe Big Foot Custom Wedge Product Specs

Club Loft Length Bounce Lie Hand Swingweight (Graphite/Steel) Material Scoting Lines
Wide-Sole C Grind 58° 35" 15° 64° RH D3 / D5 8620 Carbon Steel Full Face
Wide-Sole C Grind 60° 35" 15° 64° RH/LH D3 / D5 8620 Carbon Steel Full Face

Note: This is for your reference only and does not denote the content of the product.

KBS HI-REV 2.0 - Shaft

Flex Weight Torque Tip size Launch Spin Tip Stiffness
Wedge 115g 1.3 .355 Mid Mid Mid
Recoil Wedge Shaft With Smacwrap - Shaft

Flex Weight Torque Tip size Launch Spin
Wedge 60g 3.4 .355 Mid/High Mid/High
Golf Pride Tour Velvet Burgundy - Grip

Model Color Size Weight Type Butt Size Feel Logo
Tour Velvet 360 Burgundy Standard 53g Round .580 Textured Golf Pride

TaylorMade Milled Grind HI-Toe Big Foot Custom Wedge Shafts

Aerotech

Aerotech SteelFiber fc 90 - R is inspired by the bend profile of the tour-winning SteelFiber i95, and is available in both taper tip and parallel tip configurations. All taper tip models are ‘Constant Weight’ therefore each shaft within the set weighs the same, regardless of length.

 

Aerotech SteelFiber fc 90 - S 

 

Aerotech SteelFiber i95 T - R With more PGA Tour wins than any other golf graphite iron shaft in history, the SteelFiber i95 is the perfect transition into a lighter weight shaft which allows a player to see some good improvement in distance and vibration reduction while maintaining pinpoint accuracy and incredibly consistent distance control.

 

Aerotech SteelFiber i95 T - S 

 
Model Flex Weight (g) Torque Kick Point
Aerotech SteelFiber fc 90 R, S 95, 95 2.6-3.1, 2.4-2.9 -
Aerotech SteelFiber i95 R, S 85, 85 2.9, 2.8 -
KBS

KBS TGI 100 - S It is designed with the same E.I. curve as our KBS Tour Steel and is in every weight class to fit every player from Juniors to Women, to Tour Professionals.

 

KBS C-Taper Lite - R incorporates proven KBS performance benefits in a lighter weight design. The firm tip and soft butt produce a mid-high trajectory and controlled spin. Featuring a constant taper design and proportionate increase in wall thickness, the C-TAPER LITE optimizes energy transfer for maximum distance. Independent testing results revealed 5+ yards in added distance.

 

KBS C-Taper Lite - S 

 

KBS C-Taper Lite - X 

 

KBS C-Taper T - S shaft maximizes energy transfer, for a crisp feel, while optimizing shaft diameters in the taper and tip areas for low trajectory and spin control. Independent testing proves the C-TAPER shaft to average 5% more distance versus the market leader as well.

 

KBS C-Taper T - X 

 

KBS Tour FLT - R is proud to introduce the newest member of the KBS Golf Shaft Family; the KBS TOUR FLT. The KBS TOUR FLT is a Tour influenced shaft to fit the broadest range of players, from the Amateur Golfer, to a Tour Professional.Offering a lower ball flight for the 8 Iron and down clubs, and a higher ball flight for the 6 Iron and up, it accomplishes this while being longer and providing more spin, with the consistency and efficiency of more control.

 

KBS Tour FLT - S 

 

KBS Tour FLT - X 

 

KBS Hi-REV 2.0 115g - Wedge features an active tip section that increases the effective loft of the club head, delivering a higher ball launch with more spin for added stopping power and accuracy.

 

KBS Hi-Rev 2.0 120g - Wedge features an active tip section that increases the effective loft of the club head, delivering a higher ball launch with more spin for added stopping power and accuracy.

 

KBS S Taper Black - S shares the same bend profile as the KBS TOUR with elongated step patterns for spin, generating a stable performance throughout the swing. KBS is proud to offer the KBS Tour $-Taper in 2 finishes: Black PVD and Classic KBS Chrome, KBS Tour $-Taper is available in the following Flex and Weights: R 110g, R+ 115g, S 120g, S+ 125g and X 130g. Finally, you have Tour Feel and Money Performance.

 

KBS S Taper Black - X 

 

KBS S Taper Lite Chrome - S provides KBS signature superior feel while maintaining shot workability and tight dispersion for players seeking the ultimate tour shaft with mid/high trajectory and low/mid spin performance in a lighter weight performance frame.

 

KBS S Taper Lite Chrome - X 

 

KBS Tour T - S progressive weight steel shafts are engineered with ‘moment of inertia’ analysis to increase stability. With a mid/high flex point, these shafts generate a penetrating ball flight and low to mid spin. The higher balance point produces lower swing weights.

 

KBS Tour T - X 

 
Model Flex Weight (g) Torque Kick Point
KBS TGI S 100 - -
KBS C-Taper Lite R, S, X 105, 110, 115 -, Low, Low -, Mid, Mid
KBS C-Taper T S, X 120, 130 2.0-1.8 Low, Low
KBS Tour FLT R, S, X 110, 120, 130 Low, Low, Low Mid-High, Variable, Variable
KBS Hi-REV 2.0 115g Wedge R 115 2.1 Mid
KBS Hi-Rev 2.0 120g Wedge S 120 2.0 Mid
KBS $ Taper Black S, X 120, 130 - -
KBS S Taper Lite Chrome S, X 100, 105 - -
KBS Tour S, X 120, 130 - -
Nippon

Nippon Modus Tour 120 T - S is a mid/heavy steel shaft with a stiffer tip and softer mid section to control trajectory and provide tight dispersion.

 

Nippon Modus Tour 120 T - X 

 

Nippon Modus Tour 130 T - S This shaft is ideal for the stronger player looking for a mid/low launch and spin shaft.

 

Nippon Modus Tour 130 T - X 

 

Nippon NS PRO 950 T - R Ever since its release, this top-selling model has been a favorite among golfers of all levels looking to take points off their scores. It features exceptional weight balance and control, with ultra-lightweight design comparable to graphite that makes it easier than ever to swing.

 

Nippon NS PRO 950 T - S 

 

Nippon NS PRO Modus 105 T - R was first brought out to tour as the N.S. PRO MODUS³ PROTO ST in 2010 and was put in play immediately. The PROTO ST was in the winning bags of eight professionals since it’s launch and became the second most popular MODUS³ irons shafts on tour, just behind the N.S. PRO MODUS³ Tour 120.

 

Nippon NS PRO Modus 105 T - S 

 
Model Flex Weight (g) Torque Kick Point
Nippon Modus Tour 120 T S, X 114, 120 1.7, 1.6 Mid/High
Nippon Modus Tour 130 T S, X 124, 129 1.7-1.2, 1.6-1.2 Mid
NipponNS PRO 950 R, S 94.5, 98 2.0, 1.8 Middle
Nippon NS PRO Modus 105 T R, S 103, 106.5 1.9, 1.7 Grip
Project X

Project X LZ - 5.5 incorporates Loading Zone technology by adding a series of small steps below the grip section of the classic tapered PX profile. This slightly softens the midsection and helps raise the trajectory slightly. The result is a stable, low/mid launching shaft with smooth feel.

 

Project X LZ - 6.0 

 

Project X LZ - 6.5 

 

Project X T - 5.5 deliver penetrating trajectory and ball flight and strike the perfect balance of unrivaled distance, stability and control for golf’s most serious players.

 

Project X T - 6.0 

 

Project X T - 6.5 

 
Model Flex Weight (g) Torque Kick Point
Project X LZ 5.5, 6.0, 6.5 115, 120, 125 2.0° - 1.7° -
Project X T 5.5, 6.0, 6.5 115, 120, 125 1.8° - 1.6° -
True Temper

TT DG 105 - R300 provides players with the exact same feel as Dynamic Gold in a mid-low launch and spin shaft that is engineered to be easier to swing.

 

TT DG 105 - S300 

 

TT DG 105 - X100 

 

TT Dynamic Gold 105 Blk - R300 This allows for the control and accuracy expected from the Dynamic Gold brand while adding distance due to increased clubhead speed.

 

TT Dynamic Gold 105 Blk - S300 

 

TT Dynamic Gold 105 Blk - X100 

 

TT Dynamic Gold 105 VSS - R300 Engineered to be easier to swing, delivering the control and accuracy expected from the Dynamic Gold brand while adding distance from the increased club head speed produced by the lighter overall weight.

 

TT Dynamic Gold 105 VSS - S300 

 

TT Dynamic Gold 105 VSS - X100 

 

TT Dynamic Gold 120 - S300 shaft delivers the tour-caliber accuracy of Dynamic Gold in a lighter weight steel shaft. Stronger players will experience the exact same profile and launch as Dynamic Gold in a shaft that is easier to swing.

 

TT Dynamic Gold 120 - X100 

 

TT Dynamic Gold S200 Wedge - S200 

 

TT Dynamic Gold T - S300 This high-flex, tour-weight steel golf shaft is designed for skilled players seeking a low, penetrating ball flight for optimum control and accuracy.

 

TT Dynamic Gold T - X100 

 

TT Dynamic Gold Tour Issue - S400 provide the same power, control and the trademark penetrating ball flight associated with the entire series of Dynamic Gold irons shafts. The Tour Issue steel shafts have a Tour Only weight tolerance for custom precision fitting. The Dynamic Gold Tour Issue golf shafts are available in sets of eight (3-PW) and in S400 and X100 flexes, .355 only.

 

TT Dynamic Gold Tour Issue - X100 

 

TT Dynamic Gold - Wedge shaft is designed as a lightweight alternative to the #1 wedge shaft in the history of the game. For those who play a lightweight iron shaft, playing a lightweight wedge shaft only makes sense as it provides an ideal weight transition from your irons to wedges.

 
Model Flex Weight (g) Torque Kick Point
TT DG 105 R300, S300, X100 101, 103, 105 - -
TT Dynamic Gold 105 Blk R300, S300, X100 101, 103, - - -
TT Dynamic Gold 105 VSS R300, S300, X100 105, 107, 109 - -
TT Dynamic Gold 120 S300, X100 116, 118 - -
TT Dynamic Gold S200 Wedge Wedge 129 1.9 -
TT Dynamic Gold T S300, X100 103, 105 - -
TT Dynamic Gold Tour Issue S400, X100 132, 130 - -
TT Dynamic Gold Wedge Wedge 115 - -
UST

UST Recoil 110 - S technology, we have brought feel back into the shaft, while allowing players to hit a wide range of shots that result in better distance control and pin seeking accuracy.

 

UST Recoil 760 SmacWrap - A Recoil Technology provides optimal spring effect in the walls of the shaft and more efficient energy transfer to the ball for increased velocity and greater distance.

 

UST Recoil 760 SmacWrap - R 

 

UST Recoil 780 SmacWrap - S iron shafts are an evolution of the Recoil 760/780 ES models. These iron shafts are designed to provide maximum control and distance for all golfers through the latest in design and materials.

 

UST Recoil 95 - R iron shafts are for golfers looking for great feel, tour control, and stability in a lightweight design.

 

UST Recoil 95 - S 

 

UST Recoil SmacWrap Wedge - Wedge 

 
Model Flex Weight (g) Torque Kick Point
UST Mamiya Recoil 110 S 105 3.8 -
UST Recoil 760 SmacWrap A, R 67, 69 4.1, 4.1 -
UST Recoil 780 SmacWrap S 86 3.5 -
UST Mamiya Recoil 95 R, S 90, 90 4.1, 4.1 -

TaylorMade Milled Grind HI-Toe Big Foot Custom Wedge Grips

Golf Pride
Model Image
Golf Pride CP2 Pro Mid
Golf Pride CP2 Pro Std
Golf Pride CP2 Wrap Mid
Golf Pride CP2 Wrap Std
Golf Pride Dual Feel Round (M6 Dr/Fwy)
Golf Pride MCC +4 Align Black/Grey
Golf Pride MCC +4 Align Blk/Grey MID
Golf Pride MCC +4 Grey/Blk MID
Golf Pride MCC Align Black/White
Golf Pride MCC Plus 4
Golf Pride MCC Plus4 Grey/Blue
Golf Pride MCC Plus4 Grey/Red
Golf Pride New Decade Grey/Orange (M5)
Golf Pride New Decade Red-Black
Golf Pride New Decade Red-Black Mid
Golf Pride New Decade White Black
Golf Pride New Decade Yellow-Black
Golf Pride Tour Velvet 360 Black/Teal
Golf Pride Tour Velvet 360 Blk/Org (M5)
Golf Pride Tour Velvet 360 Burgundy
Golf Pride Tour Velvet 360 Grey/Black
Golf Pride Tour Velvet 360 Grey/Red
Golf Pride Tour Velvet Align
Golf Pride Tour Velvet Cord
Golf Pride Tour Velvet Cord Reminder
Golf Pride Tour Velvet Midsize
Golf Pride Tour Velvet Reminder
Golf Pride Tour Velvet Undersize
Golf Pride Tour Wrap 2G Black
Golf Pride Tour Wrap 2G Jumbo
Golf Pride Tour Wrap 2G Mid Black
Golf Pride Tour Wrap 2G White
Golf Pride Z Grip Black-White
Golf Pride Z Grip Black-White Mid
Lamkin
Model Image
Lamkin Crossline
Lamkin Crossline Mid
Lamkin Crossline Oversize
Lamkin Dual Feel Ladies
Lamkin GENESIS Crossline Cord
Lamkin Players Cord Std
Lamkin SONAR Plus Mid
Lamkin SONAR Plus Std
Lamkin TS1 Red/Black
Lamkin Z5 Black/Grey
Lamkin Z5 Green/White
Lamkin Z5 Neon Blue/Green
Lamkin Z5 Red/White
TaylorMade
Model Image
TaylorMade Dual Feel 47g .600 Round
TaylorMade Dual Feel 47g .620 Round
TaylorMade Dual Feel Reminder (M6 Ir/Res)
TaylorMade Dual Feel WEC 52g .600 Rib
TaylorMade Kalea Grip
TaylorMade Lamkin UTX Cord .600 Gry/Blk
TaylorMade 360 Jr .590 Red
TaylorMade Tour Velvet TM Logo
 

Specification

Construction Finish MSRP
Cast Steel Wedge/Graphite Wedge $169.99
MAIP
Call Us 855-828-1009 M-F 8AM-5PM PST | 19950 E Walnut Dr N, Walnut, CA 91789