
An iron is more than metal. It's the result of countless hours of research, testing and player feedback. From concept to delivery, every step is taken with one goal in mind. Delivering results when you need them the most. The new P•790, where our metal meets your mettle. Experience them yourself and discover the player they'll push you to become.
The head design maintains low spin with a piercing trajectory, even for those with faster swing speeds. The P•790 UDI is built for golfers who want control without sacrificing distance.
Inside the Forged Hollow Body Construction, the newly engineered SpeedFoam Air inspires increased face flexibility and fast ball speeds while upholding premium sound and feel.
SpeedFoam Air is 69% lighter than its predecessor, unlocking our thinnest P•790 face ever with an intelligent sweet spot that’s been repositioned to capture more shots, pinpointing performance where golfers need it the most.
Newly engineered SpeedFoam™ Air is 69% lighter than its predecessor. It provides an average of 3.5g of weight savings that has been redistributed to further optimize mass properties for better launch conditions. The new formulation gives you exquisite sound and feel while producing a fast, flexible face.
A new 8620 carbon steel construction makes the head thinner by up to 37.5% in strategic locations, allowing for a significantly lower CG placement. This new thin-walled design pairs with a responsive 1.5mm forged 4140 steel L-Face to promote supreme flexibility, fast ball speeds and distance while upholding a premium forged feel.
The Thru-Slot Speed Pocket™ provides increased face flexibility while preserving ball speed and distance on low face strikes.
Engineers developed new construction methods to thin out the body, allowing for up to 31g of tungsten to be placed in the toe. It creates a massive amount of stability and forgiveness wrapped in a player’s package.
HEAD | SHAFT | NUMBER | LOFT | HAND | LIE | OFFSET | LENGTH | SWING WEIGHT |
P790 UDI | Graphite | 2 | 17° | RH | 60° | 3.2mm | 40" graphite | D2 |
P790 UDI | Steel (custom only) | 2 | 17° | RH | 60° | 3.2mm | 39.25" Steel | D2 |
Note: this is for your reference only and does not denote the content of the product.
Aerotech SteelFiber fc 90 is inspired by the bend profile of the tour-winning SteelFiber i95, and is available in both taper tip and parallel tip configurations. All taper tip models are ‘Constant Weight’ therefore each shaft within the set weighs the same, regardless of length.
Aerotech SteelFiber i95 T With more PGA Tour wins than any other golf graphite iron shaft in history, the SteelFiber i95 is the perfect transition into a lighter weight shaft which allows a player to see some good improvement in distance and vibration reduction while maintaining pinpoint accuracy and incredibly consistent distance control.
Model | Flex | Weight (g) | Torque | Kick Point |
Aerotech SteelFiber fc 90 | R, S | 95, 95 | 2.6-3.1, 2.4-2.9 | - |
Aerotech SteelFiber i95 | R, S | 85, 85 | 2.9, 2.8 | - |
Aldila NV 45 offer unparalleled performance, in a 40” unitized iron, with a sleek black finish that is designed to complement the recently updated NV® and NVS wood shafts.
Model | Flex | Weight (g) | Torque | Kick Point |
Aldila NV 45 | L | 47 | 5.9 | - |
Fujikura Ventus Blue is a Tour-inspired profile and the first to include Fujikura’s all-new VeloCore Technology in an accelerated taper, ultra-stiff tip profile. Maximum energy transfer from the tip section boosts the clubhead’s performance and a straight taper design enhances loading and feel.
Model | Flex | Weight (g) | Torque | Kick Point |
Fujikura Ventus Blue 5 | A, R, S | 58, 58.5, 59 | 4.0, 3.7, 3.3 | - |
KBS C-Taper Lite incorporates proven KBS performance benefits in a lighter weight design. The firm tip and soft butt produce a mid-high trajectory and controlled spin. Featuring a constant taper design and proportionate increase in wall thickness, the C-TAPER LITE optimizes energy transfer for maximum distance. Independent testing results revealed 5+ yards in added distance.
KBS C-Taper T shaft maximizes energy transfer, for a crisp feel, while optimizing shaft diameters in the taper and tip areas for low trajectory and spin control. Independent testing proves the C-TAPER shaft to average 5% more distance versus the market leader as well.
KBS S Taper Chrome Engineered to provide superior feel while maintaining shot workability for players seeking a mid-launch and low to mid spin shaft.Shares the same bend profile as the KBS Tour shafts only with elongated step patterns to control spin, generating stable performance throughout the swing.
KBS S Taper Lite Chrome provides KBS signature superior feel while maintaining shot workability and tight dispersion for players seeking the ultimate tour shaft with mid/high trajectory and low/mid spin performance in a lighter weight performance frame.
KBS Tour FLT is proud to introduce the newest member of the KBS Golf Shaft Family; the KBS TOUR FLT. The KBS TOUR FLT is a Tour influenced shaft to fit the broadest range of players, from the Amateur Golfer, to a Tour Professional.Offering a lower ball flight for the 8 Iron and down clubs, and a higher ball flight for the 6 Iron and up, it accomplishes this while being longer and providing more spin, with the consistency and efficiency of more control.
KBS MAX Graphite is designed for a wide range of players seeking to MAXimize the performance of their iron shafts with trajectory, spin and distance in a consistent, lighter weight package, making it easier for you to produce performance on every shot. Switch into KBS and MAX OUT YOUR GAME.
KBS MAX MT 85 is a lightweight shaft for mid-high handicap players. It produces a high trajectory and spin rate for longer distance shots.
KBS Tour T progressive weight steel shafts are engineered with ‘moment of inertia’ analysis to increase stability. With a mid/high flex point, these shafts generate a penetrating ball flight and low to mid spin. The higher balance point produces lower swing weights.
Model | Flex | Weight (g) | Torque | Kick Point |
KBS C-Taper Lite | R, S, X | 105, 110, 115 | -, Low, Low | -, Mid, Mid |
KBS C-Taper T | S, X | 120, 130 | 2.0-1.8 | Low, Low |
KBS S Taper Chrome | S, X | 120, 130 | - | - |
KBS S Taper Lite Chrome | R, S | 95, 100 | - | - |
KBS Tour FLT | R, S, X | 110, 120, 130 | Low, Low, Low | Mid-High, Variable, Variable |
KBS MAX Graphite | A, R, S, L | 55, 65, 85, 45 | 4.5, 4.0, 3.0, 5.0 | - |
KBS MAX MT 85 | R, S | 102, 102 | - | - |
KBS Tour | S, X | 120, 130 | - | - |
Mitsubishi MMT Utilizes a breakthrough Metal Mesh material which is made from individually braded strands of 304 Stainless Steel that is integrated into the shaft’s prepreg layers toward the tip, MMT™ (Metal Mesh Technology) improves density and stability, while also allowing for thinner overall composite wall construction, yielding a finely tuned, highly responsive shaft.
Model | Flex | Weight (g) | Torque | Kick Point |
Mitsubishi MMT | A, R, S | 62, 73, 86 | 5.9, 5.1, 3.7 | - |
Nippon Modus Tour 120 T is a mid/heavy steel shaft with a stiffer tip and softer mid section to control trajectory and provide tight dispersion.
Nippon Modus Tour 130 T This shaft is ideal for the stronger player looking for a mid/low launch and spin shaft.
Nippon N.S. PRO Zeloz 6T was created in pursuit of a lighter, stronger, more tenacious steel shaft that would satisfy for a lifetime. The remarkable light weight was achieved by combining our state-of-the-art matching technology with NZNS 60, an original ZELOS material.
Nippon NS PRO 950 T Ever since its release, this top-selling model has been a favorite among golfers of all levels looking to take points off their scores. It features exceptional weight balance and control, with ultra-lightweight design comparable to graphite that makes it easier than ever to swing.
Nippon NS PRO 950GH neo These iron designs reduce spin and promotes harder landings for the amateur golfers. Therefore, we were required to make a new shaft to better match the times.
Nippon NS PRO Modus 105 T was first brought out to tour as the N.S. PRO MODUS³ PROTO ST in 2010 and was put in play immediately. The PROTO ST was in the winning bags of eight professionals since it’s launch and became the second most popular MODUS³ irons shafts on tour, just behind the N.S. PRO MODUS³ Tour 120.
Model | Flex | Weight (g) | Torque | Kick Point |
Nippon Modus Tour 120 T | S, X | 114, 120 | 1.7, 1.6 | Mid/High |
Nippon Modus Tour 130 T | S, X | 124, 129 | 1.7-1.2, 1.6-1.2 | Mid |
Nippon N.S. PRO Zeloz 6T | U | 68.5 | 3.0 | Tip |
NipponNS PRO 950 | R, S | 94.5, 98 | 2.0, 1.8 | Middle |
Nippon NS PRO 950GH neo | R, S | 94.5, 98 | - | - |
Nippon NS PRO Modus 105 T | R, S | 103, 106.5 | 1.9, 1.7 | Grip |
Project X IO increases in flex, it gets 5g heavier and is geometrically modified to launch lower–providing an individually optimized shaft for each flex.
Project X LS is the next evolution of the original Project X. It features an ultra-stable and stiff design that minimizes spin while providing a tight feel to keep up with even the strongest swingers on Tour.
Project X LZ incorporates Loading Zone technology by adding a series of small steps below the grip section of the classic tapered PX profile. This slightly softens the midsection and helps raise the trajectory slightly. The result is a stable, low/mid launching shaft with smooth feel.
Project X T deliver penetrating trajectory and ball flight and strike the perfect balance of unrivaled distance, stability and control for golf’s most serious players.
Project X HZRDUS Black Smoke Featuring a low-spin and low-launch profile that maintains the HZRDUS reputation,designed for today’s aggressive swingers while providing new optimized material placement to promote an improved feel and increase in playability.
Project X HZRDUS Black Smoke RDX the first shaft to utilize Hexcel’s new HexTow® HM54 high modulus carbon fiber and combines it with high tensile strength HexTow® IM2C carbon fiber to provide the ideal blend of stiffness and stability desired by the HZRDUS player.
Model | Flex | Weight (g) | Torque | Kick Point |
Project X IO | 5.5, 60 | 105, 110 | - | - |
Project X LS | 6.0, 6.5 | 120, 125 | - | - |
Project X LZ | 5.5, 6.0, 6.5 | 115, 120, 125 | 2.0° - 1.7° | - |
Project X T | 5.5, 6.0, 6.5 | 115, 120, 125 | 1.8° - 1.6° | - |
Project X HZRDUS Black Smoke 90 | 6.0 | 91.6 | 2.3 | - |
Project X HZRDUS Black Smoke 105 | 6.5 | 106.5 | 2.1 | - |
Project X HZRDUS Black Smoke RDX 90 | 6.0 | 92 | 2.9 | - |
Project X HZRDUS Black Smoke RDX 100 | 6.5 | 100 | 2.9 | - |
TT Dynamic Gold 105 VSS Engineered to be easier to swing, delivering the control and accuracy expected from the Dynamic Gold brand while adding distance from the increased club head speed produced by the lighter overall weight.
TT Dynamic Gold 120 shaft delivers the tour-caliber accuracy of Dynamic Gold in a lighter weight steel shaft. Stronger players will experience the exact same profile and launch as Dynamic Gold in a shaft that is easier to swing.
TT Dynamic Gold 95 VSS featuring our VSS Pro technology for enhanced feel, Dynamic Gold 95 is perfect for players looking for the softest feeling shaft while still keeping the consistency, stability and durability that comes with steel.
TT Dynamic Gold T This high-flex, tour-weight steel golf shaft is designed for skilled players seeking a low, penetrating ball flight for optimum control and accuracy.
TT Dynamic Gold Tour Issue provide the same power, control and the trademark penetrating ball flight associated with the entire series of Dynamic Gold irons shafts. The Tour Issue steel shafts have a Tour Only weight tolerance for custom precision fitting. The Dynamic Gold Tour Issue golf shafts are available in sets of eight (3-PW) and in S400 and X100 flexes, .355 only.
TT Elevate 95 VSS is a lightweight, high launching and spinning shaft that is designed to combat the "low spin" industry trend by increasing initial launch/spin to maximize carry distances and creating optimal land angles to hold more green.
Model | Flex | Weight (g) | Torque | Kick Point |
TT Dynamic Gold 105 VSS | R300, S300, X100 | 105, 107, 109 | - | - |
TT Dynamic Gold 120 | S300, X100 | 116, 118 | - | - |
TT Dynamic Gold 95 VSS | R300 | 95 | - | - |
TT Dynamic Gold T | S300, X100 | 103, 105 | - | - |
TT Dynamic Gold Tour Issue | S400, X100 | 132, 130 | - | - |
TT Elevate 95 VSS | R, S | 93, 94 | - | - |
UST Recoil 760 SmacWrap Recoil Technology provides optimal spring effect in the walls of the shaft and more efficient energy transfer to the ball for increased velocity and greater distance.
UST Recoil 780 SmacWrap iron shafts are an evolution of the Recoil 760/780 ES models. These iron shafts are designed to provide maximum control and distance for all golfers through the latest in design and materials.
UST Recoil 95 iron shafts are for golfers looking for great feel, tour control, and stability in a lightweight design.
Model | Flex | Weight (g) | Torque | Kick Point |
UST Recoil 450 ESX T | L | 52 | 4.2 | - |
UST Recoil 460 ESX T | A, R, S | 59, 64, 67 | 4.8, 4.7, 4.6 | - |
UST Recoil 760 SmacWrap | A, R | 67, 69 | 4.1, 4.1 | - |
UST Recoil 780 SmacWrap | S | 86 | 3.5 | - |
UST Mamiya Recoil 95 | R, S | 90, 90 | 4.1, 4.1 | - |
Model | Image |
Golf Pride CP2 Pro | ![]() |
Golf Pride CP2 Wrap | ![]() |
Golf Pride MCC 4 Align Black/Grey | ![]() |
Golf Pride MCC 4 Grey/Blk | ![]() |
Golf Pride MCC Align Black/White | ![]() |
Golf Pride MCC Plus 4 | ![]() |
Golf Pride MCC Plus4 Grey/Red | ![]() |
Golf Pride New Decade Red-Black | ![]() |
Golf Pride New Decade White Black | ![]() |
Golf Pride Tour Velvet 360 Grey/Black | ![]() |
Golf Pride Tour Velvet Reminder | ![]() |
Golf Pride Tour Velvet | ![]() |
Golf Pride Tour Wrap 2G Black | ![]() |
Golf Pride Tour Wrap 2G White | ![]() |
Golf Pride Z Grip 360 Grey/Black | ![]() |
Golf Pride Z Grip Black | ![]() |
Golf Pride Z Grip Green | ![]() |
Golf Pride Z Grip Light Blue | ![]() |
Golf Pride Z Grip Orange | ![]() |
Golf Pride Z Grip Red | ![]() |
Golf Pride Z Grip Royal Blue | ![]() |
Golf Pride Z Grip Silver | ![]() |
Golf Pride Z Grip Yellow | ![]() |
Golf Pride ZGrip Blk/Gry.600(SIM Dr/Fwy) | ![]() |
Model | Image |
Iomic Sticky 2.3 Black | ![]() |
Iomic Sticky 2.3 Blue/Black | ![]() |
Model | Image |
Lamkin CrossBlk/Gry.600Rem(SIMIr/Res) | ![]() |
Lamkin Crossline | ![]() |
Lamkin Crossline 360 Black/Grey | ![]() |
Lamkin Crossline Black/Red | ![]() |
Lamkin Crossline Black/Blue GEC (MG3) | ![]() |
Lamkin Dual Feel Ladies | ![]() |
Lamkin GENESIS Crossline Cord | ![]() |
Lamkin Players Cord | ![]() |
Lamkin SONAR Plus | ![]() |
Lamkin Sonar Wms Grey/White.580(SIM) | ![]() |
Lamkin SONAR Wrap | ![]() |
Lamkin ST Hybrid Mid | ![]() |
Lamkin ST Hybrid Std | ![]() |
Lamkin ST Hybrid with Calibrate Mid | ![]() |
Lamkin ST Hybrid with Calibrate Std | ![]() |
Model | Image |
SuperStroke Cross Comfort | ![]() |
SuperStroke Traxion Tour | ![]() |
Model | Image |
TaylorMade 360 Jr .590 Red | ![]() |
TaylorMade Tour Velvet TM Logo | ![]() |
Model | Image |
Winn DriTac 2.0 Ladies Black | ![]() |
Winn DriTac 2.0 Midsize Black | ![]() |
Winn DriTac 2.0 Oversize Black | ![]() |
Winn DriTac 2.0 Standard Black | ![]() |
Winn DriTac Black-Blue | ![]() |
Winn DriTac Black-Red | ![]() |
Construction | Iron Back | MSRP |
Forged | Muscle Back | $249.99 |