null

TaylorMade Stealth Custom Irons

SKU : ELE0168
$142.85
Earn up to 0 reward points from this purchase! See Details
Online and store prices may vary.

Expected release date is April 1st, 2022

TaylorMade Stealth Custom Irons

CAP BACK™ DESIGN WITH TOE WRAP CONSTRUCTION

Cap Back™ Design with toe wrap construction expands the distance, forgiveness and feel benefits of the original breakthrough technology. This advanced engineering feat shifts mass from the extreme high toe of the head and repositions it in the sole to create an extremely low CG. The result is an iron that is easy to launch with a hot trajectory throughout the set.

 
FAST FORGIVING FACE

A 450SS face has an intelligently positioned sweet spot that spans the most common impact points, delivering explosive ball speeds and consistency in all the right places.

 
THRU-SLOT SPEED POCKET

Patented TaylorMade® technology engineered to maximize face flexibility for increased ball speed and forgiveness for mis-hits low on the face.

 
ECHO DAMPING SYSTEM®

Located behind the face, the ECHO® Damping System uses a soft polymer blend and multiple contact points across the face to channel away harsh vibrations and create a forged-like feel at impact.

 

TaylorMade Stealth Custom Iron Product Specs

Club Loft Lie Offset Bounce Length Men's Length Women's Swingweight Men's Swingweight Women's Hand
4 18.5° 61.5° 5.8mm 2.0° 39.125” 38.125” D1/D0 C2 RH/LH
5 21° 62° 5mm 3.5° 38.5” 37.5” D1/D0 C2 RH/LH
6 24° 62.5° 4.6mm 5.0° 37.88” 36.88” D1/D0 C2 RH/LH
7 28° 63° 4.1mm 5.6° 37.25” 36.25” D1/D0 C2 RH/LH
8 32° 63.5° 3.4mm 6.3° 36.75” 35.75” D1/D0 C2 RH/LH
9 37° 64° 2.9mm 6.8° 36.25” 35.25” D1/D0 C2 RH/LH
PW 43° 64.5° 2.6mm 7.8° 35.75” 34.75” D1/D0 C2 RH/LH
AW 49° 64.5° 2mm 9.0° 35.5” 34.5” D1/D0 C2 RH/LH
SW 54° 64.5° 1.5mm 12.5° 35.25” 34.25” D2/D1 C2 RH/LH

Note: This is for your reference only and does not denote the content of the product.

KBS Max MT 85 - Shaft
Fujikura Ventus Red - Shaft
Lamkin Crossline 360 Black/Red - Grip

TaylorMade Stealth Custom Iron Shafts

Aerotech

Aerotech SteelFiber fc 90 is inspired by the bend profile of the tour-winning SteelFiber i95, and is available in both taper tip and parallel tip configurations. All taper tip models are ‘Constant Weight’ therefore each shaft within the set weighs the same, regardless of length.

 

Aerotech SteelFiber i95 T With more PGA Tour wins than any other golf graphite iron shaft in history, the SteelFiber i95 is the perfect transition into a lighter weight shaft which allows a player to see some good improvement in distance and vibration reduction while maintaining pinpoint accuracy and incredibly consistent distance control.

 
Model Flex Weight (g) Torque Kick Point
Aerotech SteelFiber fc 90 R, S 95, 95 2.6-3.1, 2.4-2.9 -
Aerotech SteelFiber i95 R, S 85, 85 2.9, 2.8 -
Aldila

Aldila Ascent 45 take our FlyDrive™ Technology and integrate it into high performance ultralight hybrids that are designed to compliment the look, feel and performance of the all new ASCENT™ Ultralight Wood shafts.

 

Aldila NV 45 offer unparalleled performance, in a 40” unitized iron, with a sleek black finish that is designed to complement the recently updated NV® and NVS wood shafts.

 
Model Flex Weight (g) Torque Kick Point
Aldila Ascent 45 L 44 5.0 -
Aldila NV 45 L 47 5.9 -
Fujikura

Fujikura Air Speeder 50 unites stability and speed in an ultra-lightweight profile through Fujikura’s use of proprietary materials and construction techniques.

 

Fujikura Ventus Blue is a Tour-inspired profile and the first to include Fujikura’s all-new VeloCore Technology in an accelerated taper, ultra-stiff tip profile. Maximum energy transfer from the tip section boosts the clubhead’s performance and a straight taper design enhances loading and feel.

 

Fujikura Ventus Red HY/IR HY The exceptionally engineered Ventus is designed to significantly tighten shot dispersion and maximize ball speed especially on off-center shots.

 
Model Flex Weight (g) Torque Kick Point
Fujikura Air Speeder 50 M, R, S 50, 56, 56 4.3, 4.1, 4.0 -
Fujikura Ventus Blue 5 A, R, S 58, 58.5, 59 4.0, 3.7, 3.3 -
Fujikura Ventus Red HY/IR HY M, R, S 56, 66, 76 3.4, 3.0, 2.8 -
KBS

KBS C-Taper Lite incorporates proven KBS performance benefits in a lighter weight design. The firm tip and soft butt produce a mid-high trajectory and controlled spin. Featuring a constant taper design and proportionate increase in wall thickness, the C-TAPER LITE optimizes energy transfer for maximum distance. Independent testing results revealed 5+ yards in added distance.

 

KBS C-Taper T shaft maximizes energy transfer, for a crisp feel, while optimizing shaft diameters in the taper and tip areas for low trajectory and spin control. Independent testing proves the C-TAPER shaft to average 5% more distance versus the market leader as well.

 

KBS S Taper Chrome Engineered to provide superior feel while maintaining shot workability for players seeking a mid-launch and low to mid spin shaft.Shares the same bend profile as the KBS Tour shafts only with elongated step patterns to control spin, generating stable performance throughout the swing.

 

KBS S Taper Lite Chrome provides KBS signature superior feel while maintaining shot workability and tight dispersion for players seeking the ultimate tour shaft with mid/high trajectory and low/mid spin performance in a lighter weight performance frame.

 

KBS Tour FLT is proud to introduce the newest member of the KBS Golf Shaft Family; the KBS TOUR FLT. The KBS TOUR FLT is a Tour influenced shaft to fit the broadest range of players, from the Amateur Golfer, to a Tour Professional.Offering a lower ball flight for the 8 Iron and down clubs, and a higher ball flight for the 6 Iron and up, it accomplishes this while being longer and providing more spin, with the consistency and efficiency of more control.

 

KBS MAX Graphite  is designed for a wide range of players seeking to MAXimize the performance of their iron shafts with trajectory, spin and distance in a consistent, lighter weight package, making it easier for you to produce performance on every shot. Switch into KBS and MAX OUT YOUR GAME.

 

KBS MAX MT 85  is a lightweight shaft for mid-high handicap players. It produces a high trajectory and spin rate for longer distance shots.

 

KBS Tour 2020 maximizes energy transfer for increased shot control. The KBS TOUR offers a smooth, responsive feel and is the preferred model by several of the best golfers in the world.

 

KBS Tour T progressive weight steel shafts are engineered with ‘moment of inertia’ analysis to increase stability. With a mid/high flex point, these shafts generate a penetrating ball flight and low to mid spin. The higher balance point produces lower swing weights.

 

KBS Tour Lite 

 
Model Flex Weight (g) Torque Kick Point
KBS C-Taper Lite R, S, X 105, 110, 115 -, Low, Low -, Mid, Mid
KBS C-Taper T S, X 120, 130 2.0-1.8 Low, Low
KBS S Taper Chrome S, X 120, 130 - -
KBS S Taper Lite Chrome R, S 95, 100 - -
KBS Tour FLT R, S, X 110, 120, 130 Low, Low, Low Mid-High, Variable, Variable
KBS MAX Graphite A, R, S, L 55, 65, 85, 45 4.5, 4.0, 3.0, 5.0 -
KBS MAX MT 85 R, S 102, 102 - -
KBS Tour 2020 S 120 Low -
KBS Tour Lite R, S 95, 100 2.5, 2.3 -
Mitsubishi

Mitsubishi MMT Utilizes a breakthrough Metal Mesh material which is made from individually braded strands of 304 Stainless Steel that is integrated into the shaft’s prepreg layers toward the tip, MMT™ (Metal Mesh Technology) improves density and stability, while also allowing for thinner overall composite wall construction, yielding a finely tuned, highly responsive shaft.

 
Model Flex Weight (g) Torque Kick Point
Mitsubishi MMT A, R, S 62, 73, 86 5.9, 5.1, 3.7 -
Project X

Project X IO increases in flex, it gets 5g heavier and is geometrically modified to launch lower–providing an individually optimized shaft for each flex.

 

Project X LS is the next evolution of the original Project X. It features an ultra-stable and stiff design that minimizes spin while providing a tight feel to keep up with even the strongest swingers on Tour.

 

Project X LZ incorporates Loading Zone technology by adding a series of small steps below the grip section of the classic tapered PX profile. This slightly softens the midsection and helps raise the trajectory slightly. The result is a stable, low/mid launching shaft with smooth feel.

 

Project X T deliver penetrating trajectory and ball flight and strike the perfect balance of unrivaled distance, stability and control for golf’s most serious players.

 
Model Flex Weight (g) Torque Kick Point
Project X IO 5.5, 60 105, 110 - -
Project X LS 6.0, 6.5 120, 125 - -
Project X LZ 5.5, 6.0, 6.5 115, 120, 125 2.0° - 1.7° -
Project X T 5.5, 6.0, 6.5 115, 120, 125 1.8° - 1.6° -
True Temper

TT Dynamic Gold 105 VSS Engineered to be easier to swing, delivering the control and accuracy expected from the Dynamic Gold brand while adding distance from the increased club head speed produced by the lighter overall weight.

 

TT Dynamic Gold 120 shaft delivers the tour-caliber accuracy of Dynamic Gold in a lighter weight steel shaft. Stronger players will experience the exact same profile and launch as Dynamic Gold in a shaft that is easier to swing.

 

TT Dynamic Gold 95 VSS featuring our VSS Pro technology for enhanced feel, Dynamic Gold 95 is perfect for players looking for the softest feeling shaft while still keeping the consistency, stability and durability that comes with steel.

 

TT Dynamic Gold T This high-flex, tour-weight steel golf shaft is designed for skilled players seeking a low, penetrating ball flight for optimum control and accuracy.

 

TT Dynamic Gold Tour Issue provide the same power, control and the trademark penetrating ball flight associated with the entire series of Dynamic Gold irons shafts. The Tour Issue steel shafts have a Tour Only weight tolerance for custom precision fitting. The Dynamic Gold Tour Issue golf shafts are available in sets of eight (3-PW) and in S400 and X100 flexes, .355 only.

 

TT Elevate 95 VSS is a lightweight, high launching and spinning shaft that is designed to combat the "low spin" industry trend by increasing initial launch/spin to maximize carry distances and creating optimal land angles to hold more green.

 
Model Flex Weight (g) Torque Kick Point
TT Dynamic Gold 105 VSS R300, S300, X100 105, 107, 109 - -
TT Dynamic Gold 120 S300, X100 116, 118 - -
TT Dynamic Gold 95 VSS R300 95 - -
TT Dynamic Gold T S300, X100 103, 105 - -
TT Dynamic Gold Tour Issue S400, X100 132, 130 - -
TT Elevate 95 VSS R, S 93, 94 - -
UST

UST Recoil 450 ESX T iron shafts are an evolution of the Recoil 450/460 ES models. Recoil ESX are designed to provide maximum distance and control for all golfers through the latest in design and materials.

 

UST Recoil 460 ESX T Recoil Technology provides optimal spring effect in the walls of the shaft and more efficient energy transfer to the ball for increased velocity and greater distance.

 

UST Recoil 760 SmacWrap Recoil Technology provides optimal spring effect in the walls of the shaft and more efficient energy transfer to the ball for increased velocity and greater distance.

 

UST Recoil 780 SmacWrap iron shafts are an evolution of the Recoil 760/780 ES models. These iron shafts are designed to provide maximum control and distance for all golfers through the latest in design and materials.

 

UST Recoil DART designed after years of research, testing and development to precisely optimize shaft hoop stiffness in the critical areas of the golf shaft. To achieve maximum distance, optimum hoop stiffness is designed into the energy transfer section of the shaft. In the tip. section, the hoop stiffness is increased to maintain feel while also stabilizing the tip section for maximum consistency and optimum ball flight.

 
Model Flex Weight (g) Torque Kick Point
UST Recoil 450 ESX T L 52 4.2 -
UST Recoil 460 ESX T A, R, S 59, 64, 67 4.8, 4.7, 4.6 -
UST Recoil 760 SmacWrap A, R 67, 69 4.1, 4.1 -
UST Recoil 780 SmacWrap S 86 3.5 -
UST Recoil DART A, R, S     -

TaylorMade Stealth Custom Iron Grips

Golf Pride
Model Image
Golf Pride CP2 Pro
Golf Pride CP2 Wrap
Golf Pride MCC 4 Align Black/Grey
Golf Pride MCC 4 Grey/Blk
Golf Pride MCC Align Black/White
Golf Pride MCC Plus 4
Golf Pride MCC Plus4 Grey/Red
Golf Pride New Decade Red-Black
Golf Pride New Decade White Black
Golf Pride Tour Velvet 360 Grey/Black
Golf Pride Tour Velvet Reminder
Golf Pride Tour Velvet
Golf Pride Tour Wrap 2G Black
Golf Pride Tour Wrap 2G White
Golf Pride Z Grip 360 Grey/Black
Golf Pride Z Grip Black-White
Golf Pride Z Grip Green
Golf Pride Z Grip Light Blue
Golf Pride Z Grip Orange
Golf Pride Z Grip Red
Golf Pride Z Grip Royal Blue
Golf Pride Z Grip Silver
Golf Pride Z Grip Yellow
Golf Pride ZGrip Blk/Gry.600(SIM Dr/Fwy)
Iomic
Model Image
Iomic Sticky 2.3 Black
Iomic Sticky 2.3 Blue/Black
Lamkin
Model Image
Lamkin CrossBlk/Gry.600Rem(SIMIr/Res)
Lamkin Crossline
Lamkin Crossline 360 Black/Grey
Lamkin Crossline Black/Red
Lamkin Crossline Black/Blue GEC (MG3)
Lamkin Crossline Black/Red .600 Rem
Lamkin Crossline
Lamkin Crossline TM
Lamkin Dual Feel Ladies
Lamkin GENESIS Crossline Cord
Lamkin SONAR Plus
Lamkin Sonar Wms Grey/White.580(SIM)
Lamkin SONAR Wrap
Lamkin ST Hybrid Mid
Lamkin ST Hybrid Std
Lamkin ST Hybrid with Calibrate Mid
Lamkin ST Hybrid with Calibrate Std
SuperStroke
Model Image
SuperStroke Cross Comfort
SuperStroke Traxion Tour
TaylorMade
Model Image
TaylorMade 360 Jr .590 Red
TaylorMade Tour Velvet TM Logo
Winn
Model Image
Winn DriTac 2.0 Ladies Black
Winn DriTac 2.0 Midsize Black
Winn DriTac 2.0 Oversize Black
Winn DriTac 2.0 Standard Black
Winn DriTac Wrap Grey
Winn DriTac Black-Blue
Winn DriTac Black-Red
 

Specification

Construction Iron Back MSRP
Forged Muscle Back $142.85
NPIP
ADDRESS: 19950 E. WALNUT DR. N. WALNUT CA 91789