GolfioGolfioGolfio

Srixon ZX7 Mk II Custom Driver

Made for very aggressive swings. A larger footprint with forward weighting provides low spin and a high degree of forgiveness.

Technology
ZX7 Mk II Driver

The ZX7 Mk II Driver is configured for those seeking maximum adjustability in a compact silhouette. Its two swappable heel and toe weights, plus adjustable hosel sleeve, mean you can easily dial in your desired launch condition. Its tight shape profile provides maximum workability and the freedom of complex shotmaking.

A TRANSFER OF POWER

Get more power where it counts—at impact. A stronger Rebound Frame design with dual flex zones delivers purer energy transfer from club face through the ball, enhancing distance on every shot. And it’s only available on new ZX Mk II Woods.

REBOUND FRAME

Most Drivers have one flex zone. Rebound Frame has two. Like a spring within a spring, Rebound Frame elevates COR across the face for increased ball speed. And that extra ball speed leads to more distance off the tee.

DUAL FLEX ZONES

Here’s how it works: Like any modern Driver, the speed of ZX Mk II starts with a flexible face—and our Driver face is especially fast thanks to its advanced Ti51AF Titanium alloy construction.

The similarities end there, though, because Rebound Frame adds a second flexible zone, a ring of thin titanium in the body of the Driver. When these two zones flex simultaneously at impact, then snap back into shape, their compounded energy transfer is far more powerful than single-flex designs.

ADJUSTABILITY

Swappable weight ports on the heel and toe allow you to adjust swing weight and Center of Gravity to favor a draw or fade shape. With the ZX7 Driver’s included 4g and 8g toe and heel weights, you can adjust your left-to-right shot shape by 5–6 yards. Opt for the full range of available weights, including a 14g option, and you could adjust your horizontal ball flight by as much as 20 yards. An adjustable hosel also provides the opportunity to perfect your preferred loft, lie, and face angle.

STAR FRAME CROWN

A complex series of ridges and latticework provides the structural integrity necessary to feature a remarkably thin titanium crown. This new, ultralight design gives us the freedom to place discretionary mass where it best suits each ZX Mk II Driver’s ideal launch and spin characteristics.

VARIABLE THICKNESS FACE

An intricate thickness pattern—hidden on the backside of our Ti51AF Driver faces—expands high COR areas from heel to toe by improving how energy reflects into the ball on off-center shots. It’s adding ball speed for even more distance off the tee.

Srixon ZX7 Mk II Custom Driver Product Specs

Loft Hand Lie Volume Length Swing Weight
9.5° RH/LH 58.5° 460cc 45.25" D3(R,S), D4(X)
10.5° RH/LH 58.5° 460cc 45.25" D3(R,S)

Note: this is for your reference only and does not denote the content of the product.

PROJECT X HZRDUS BLACK GEN 4 70/60 - Shaft

The new Project X HZRDUS Black features a low-trajectory, low-spin design for better players with aggressive swing tempos. It features an ultra-stiff midsection along with a stiff tip section to provide the low launch and low spin required to keep up with your aggressive swing.

Tip Diameter Weight (G) Launch Spin Flex
0.335" 62g
71g
Low Low 60: 5.5-R, 6.0-S
70: 6.5-X
GOLF PRIDE TOUR VELVET 360 - Grip

Golf Pride Tour Velvet grips have been the #1 choice of the world’s best for years. Our 360 version has less intrusive logos along with a state-of-the-art rubber-blend compound and a nonslip surface pattern for maximum playability.

Size Core Weight
Standard .580" 52g

Srixon ZX7 Mk II Custom Driver Shafts

Aldila

ALDILA Ascent Ultralite 40 delivers an easy, high launch angle without the typical compromises of an ultra-lightweight shaft.

 

ALDILA Rogue Black 130 MSI offers unmatched performance and consistency through the use of advanced, extremely high modulus, Graphitic Carbon Fibers that provide performance characteristics never before available in a golf shaft.

 

ALDILA Rogue Silver 110 MSI 60 offers unmatched performance and consistency through the use of advanced aerospace materials and design technology.

 
Model Flex Weight (g) Torque Kick Point
ALDILA Ascent Ultralite 40 R 47 8.2 Low
ALDILA Rogue Black 130 MSI 50 TR, TS 56, 58 5.2, 5.1 Mid, Mid
ALDILA Rogue Black 130 MSI 60 TS, TX 63, 65 4.4, 4.0 Mid, Mid
ALDILA Rogue Silver 110 MSI 60 S 63 3.5 Mid/High
Fujikura

FUJI Ventus Red is a Tour-inspired profile and the first to include Fujikura’s all-new VeloCore Technology in an ultra tip-stiff profile.

 

FUJI Ventus Blue Ventus features the first ever shaft with VeloCore technology and is designed to give players mid-launch and low-spin.

 

FUJI Ventus Blue NonVelocore 

 

FUJI Ventus Black The Ventus is designed to significantly tighten shot dispersion and maximize ball speed especially on off-center shots. Ventus is a Tour-inspired profile and the first to include Fujikura’s all-new VeloCore Technology in an accelerated taper, ultra-stiff tip profile.

 

FUJI Speeder Evo VI Speeder Evolution VI incorporates the latest materials and construction practices available with the advanced learnings from its predecessors.

 
Model Flex Weight (g) Torque Kick Point
FUJI Ventus Red 5 S 59 3.5 Low
FUJI Ventus Red 6 R, S, X 64.5, 65, 66 3.4, 3.2, 3.1 Low, Low, Low
FUJI Ventus Blue 5 R, S 58.5, 59 3.7, 3.3 Mid, Mid
FUJI Ventus Blue 5 NonVelocore R, S 58, 59 4.3, 3.9 Mid, Mid
FUJI Ventus Blue 6 R, S, X 65, 65, 65 3.5, 3.1, 3.1 Mid, Mid, Mid
FUJI Ventus Blue 6 NonVelocore R, S, X 65, 66, 67 4.1, 3.7, 3.7 Mid, Mid, Mid
FUJI Ventus Blue 7 S, X 76, 77.5 3.0, 2.9 Mid, Mid
FUJI Ventus Blue 7 NonVelocore S, X 74, 75 3.6, 3.5 Mid, Mid
FUJI Ventus Black 6 S, X 64, 65 3.4, 3.1 Mid, Mid
FUJI Ventus Black 7 S, X 76, 77.5 3.0, 2.9 Mid, Mid
FUJI Speeder Evo VI 661 S, X 65.5, 67 3.9, 3.9 Mid/High, Mid/High
FUJI Speeder Evo VI 757 S, X 73, 74.5 3.4, 3.4 Mid/High, Mid/High
Graphite Design

GD TOUR AD DI Graphite Design proprietary Material Stiffness Integration (MSI) design philosophy and technology.

 

GD TOUR AD XC Utilizes the brand new TORAYCA®M40X carbon fiber pre-preg in the mid to tip section with NANOALLOY® technology in the tip section of the shaft for unrivaled shaft stability and precise ball control.

 

GD Tour AD HD shaft profile is Firm starting at the handle, Firm in the center section and has a Firm+ tip to promote a Mid-launch angle and Low to Low/Mid ball spin rates.

 

GD TOUR AD IZ Black/Orange shaft has a firm stiffness starting at the handle, and medium center section and a firm+ tip profile to promote a high launch angle and low ball spin rates.

 
Model Flex Weight (g) Torque Kick Point
GD TOUR AD DI-6 Orange S, X 65, 67 3.3, 3.3 Mid, Mid
GD TOUR AD DI-7 Orange S, X 74, 75 3.2, 3.1 Mid, Mid
GD TOUR AD XC-6 Black S, X 64, 65 3.2, 3.2 Mid-High
GD TOUR AD XC-7 Black S, X 73, 75 3.0, 3.0 Mid-High
GD Tour AD HD 6 S, X 66, 68 3.1, 3.1 Mid, Mid
GD Tour AD HD 7 S, X 74, 76 2.9, 2.9 Mid, Mid
GD TOUR AD IZ-6 Black/Orange S, X 63, 65 3.2, 3.2 Mid, Mid
GD TOUR AD IZ-7 Black/Orange S, X 72, 74 3.1, 3.1 Mid, Mid
KBS

KBS TD Driver/Wood is a lighter and stiffer Driver/Wood shaft with characteristics of the original KBS feel. It is the perfect complement to our already proven performance-driven line of golf shafts now fitting your entire golf bag.

 
Model Flex Weight (g) Torque Kick Point
KBS TD Driver/Wood 50 A, R, S 50, 50, 50 4.2, 4.0, 3.9 Low, Low/Mid, Mid
KBS TD Driver/Wood 60 S, X 61, 62 3.1, 3.0 Mid, Mid High
KBS TD Driver/Wood 70 S. X 70, 71 2.9, 2.9 Mid, Mid High
Mitsubishi

MITSU Diamana DF uses strategically positioned DIALEAD® Pitch Fiber, and an incredibly strong hybrid prepreg that combines Mitsubishi Chemical’s MR70 – a carbon fiber material that is 20% stronger and has 10% higher modulus than conventional carbon fibers, with boron fibers to create our newest lower launching, stiff-tip profile.

 

MITSU Diamana ZF feature moderately stronger, more stable butt and tip sections with a slightly softer and more active middle section. This produces a shaft that is incredibly solid during shaft loading and unloading, and at impact, but with smoother energy transfer and easier acceleration throughout the swing.

 

MITSU Tensei AV Blue modernizes MCA GOLF’s tour-proven, classic smooth bend profile. Aluminum Vapor Coated Fiber in the butt section adds stability, to help achieve the desired EI target and stiffness.

 

MITSU New Tensei AV White features our widely known Aluminum Vapor in the handle section to provide added stability and improved power transfer. Built with a strengthened tip to promote a lower, more penetrating trajectory and low spin.

 

MITSU Tensei AV Raw Blue modern performance with a classic, smooth bend profile. The RAW finish reveals the Aluminum Vapor (AV) Coated Weave in the butt section, a visible cue of the added stability this unique weave provides.

 

MITSU Tensei AV Raw White feature a RAW finish that reveals the Aluminum Vapor (AV) Coated Weave in the butt section, a visible cue of the added stability this unique weave provides. Produced by coating an extremely thin and tight weave with aluminum vapor in a vacuum-sealed chamber, the AV Coated Weave reduces shaft ovaling and improve energy transfer.

 
Model Flex Weight (g) Torque Kick Point
MITSU Diamana DF 60 R, S, X 60,64,66 3.8, 3.8, 3.8 Mid/High, Mid/High, Mid/High
MITSU Diamana ZF 60 S, TX 65, 69 3.8, 3.7 Mid/High, Mid/High
MITSU New Tensei AV Blue 55 R 58 5.4 Mid
MITSU New Tensei AV Blue 65 S 59 5.4 Mid
MITSU New Tensei AV White 65 S, X 68, 69 3.5, 3.4 High, High
MITSU Tensei AV Raw Blue 75 R, S, X 74, 77, 78 4.1, 3.9, 3.4 Mid, Mid, Mid
MITSU Tensei AV Raw White 75 S, X 75, 77 3.0, 3.1 High, High
Project X

Proj X EvenFlow Riptide is a mid spin/launch design and features Torsional Stability Optimization which allows for an extremely stable shaft while maintaining the signature smooth EvenFlow feel.

 

Proj X HZRDUS Smoke Green is designed to reduce spin for the strongest swingers and is the first major shaft introduced using Hexcel’s HexTow HM63 fiber.

 

Proj X HZRDUS Black Gen 4 Dual Torsional Design is a proprietary process that allows our engineers more freedom when designing a golf shaft—allowing them to dial in stability and desired torques more efficiently, producing a fully optimized golf shaft with regards to player profile.

 

Proj X HZRDUS Smoke Black RDX features an ultra-stiff midsection along with a stiff tip section to provide a low launch and low spin shaft designed to keep up with your swing.

 

Proj X HZRDUS Smoke Blue RDX is a counterbalanced design that features a soft midsection to maximize shaft load and feel while maintaining a stout butt and tip section to keep up with all swing speeds and provide a stable feel through impact.

 

Proj X HZRDUS Smoke Red RDX features a stiff butt and midsection that best suits aggressive tempos but contains an active tip section for increased trajectory.

 
Model Flex Weight (g) Torque Kick Point
Proj X EvenFlow Riptide 70 6.0, 6.5 71, 71 4.2, 4.0 -
Proj X HZRDUS Smoke Green 70 6.5 72 2.8 High
Proj X HZRDUS Black Gen 4 60 5.5, 6.0 62, 62 3.8, 3.3 -
Proj X HZRDUS Black Gen 4 70 7.0 71 3.1 -
Proj X HZRDUS Smoke Black RDX 60 5.5, 6.0, 6.5 58, 58, 59 4.0, 3.5, 3.5 -
Proj X HZRDUS Smoke Blue RDX 60 6.0 64 3.4 -
Proj X HZRDUS Smoke Red RDX 50 5.0 50 5.9 -
Proj X HZRDUS Smoke Red RDX 60 5.5, 6.0, 6.5 60, 60, 60 4.5, 3.5, 3.5 -
UST

UST Helium Nanocore Innovative materials and design profile stabilize shaft flexural and torsional characteristics in harmony with the ultra light weight design to optimize shaft performance and consistency with precise feel.

 

UST Proforce V2 HL Provides greater control in the hands of the golfer for both aggressive and smooth tempo golfers.

 
Model Flex Weight (g) Torque Kick Point
UST Helium Nanocore 4 A 45 6.3 Low
UST Helium Nanocore 5 R 55 5.7 Low
UST Proforce V2 HL 6 R, S 66, 65 3.0, 3.0 -

Srixon ZX7 Mk II Custom Driver Grips

Golf Pride
Model Image
GP 2G Tour Wrap Black
GP 2G Tour Wrap Red
GP 2G Tour Wrap White
GP CP2 Pro Red
GP CP2 Pro Wrap Blue
GP MCC Align Blk/White
GP MCC Plus4 Align Grey
GP MCC Plus4 Blue
GP MCC Plus4 Red
GP MCC Plus4 Grey
GP MCC Classic BlkWht Align
GP New Dec MCC Blk/Blue
GP New Dec MCC Blk/Red
GP New Dec MCC Blk/Wht
GP Tour Velvet 360
GP Tour Velvet Align
GP Tour Velvet Full Cord
GP Tour Velvet
GP Tour Velvet Plus4
GP Tour Wrap MicroSuede Under Size
GP Z Cord
GP ZGRIP Cord
Jumbo Max
Model Image
JumboMax JMX Ultralite
Lamkin
Model Image
Lamkin CBX Womens
Lamkin CG1 Wedge Black
Lamkin Crossline 360
Lamkin Crossline Cord Rnd
Lamkin Crossline
Lamkin Sonar+
Lamkin St+2 Hyb
Lamkin UTx (Solid Gray)
SuperStroke
Model Image
SS S-Tech Midsize Blk
Winn
Model Image
Winn Dri-Tac
Winn Dri-Tac Mid
Winn Dri-Tac Lite Midsize
Winn Dri-Tac Lite Oversize
Winn Excel
 

Specification

ClubHead Volume Club Length Headcover Wrench Interchangeable Shaft MSRP
460cc 45.25" Yes Yes Yes $499.99
NPIP
Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
January,February,March,April,May,June,July,August,September,October,November,December
Not enough items available. Only [max] left.
Add to WishlistBrowse WishlistRemove Wishlist
Shopping cart

Your cart is empty.

Return To Shop

Add Order Note Edit Order Note
Estimate Shipping
Add A Coupon

Estimate Shipping

Add A Coupon

Coupon code will work on checkout page