Aerotech SteelFiber fc is a great shaft for those slower swing speed players looking to raise ball flight and gain as much yardage as possible.

Aerotech SteelFiber is a great shaft for those slower swing speed players looking to raise ball flight and gain as much yardage as possible.

Fujikura Speeder NX TCS 

Fujikura Speeder NX TCS 40 

Fujikura Ventus Red HY/IR HY The exceptionally engineered Ventus is designed to significantly tighten shot dispersion and maximize ball speed especially on off-center shots.

Fujikura Ventus TR Blue designed to significantly tighten shot dispersion and maximize ball speed especially on off-center shots.

KBS C-Taper Lite  incorporates proven KBS performance benefits in a lighter weight design. The firm tip and soft butt produce a mid-high trajectory and controlled spin. Featuring a constant taper design and proportionate increase in wall thickness, the C-TAPER LITE optimizes energy transfer for maximum distance. Independent testing results revealed 5+ yards in added distance.

KBS C-Taper shaft maximizes energy transfer, for a crisp feel, while optimizing shaft diameters in the taper and tip areas for low trajectory and spin control. Independent testing proves the C-TAPER shaft to average 5% more distance versus the market leader as well.

KBS Hi-REV 2.0 115g features an active tip section that increases the effective loft of the club head, delivering a higher ball launch with more spin for added stopping power and accuracy.

KBS S Taper Chrome Engineered to provide superior feel while maintaining shot workability for players seeking a mid-launch and low to mid spin shaft.Shares the same bend profile as the KBS Tour shafts only with elongated step patterns to control spin, generating stable performance throughout the swing.

KBS MAX Graphite designed for a wide range of players seeking to MAXimize the performance of their iron shafts with trajectory, spin, and distance in a consistent, lighter weight package, making it easier for you to produce performance on every shot.

KBS MAX MT  is a lightweight shaft for mid-high handicap players. It produces a high trajectory and spin rate for longer distance shots.

KBS MAX Lite 

KBS Tour progressive weight steel shafts are engineered with ‘moment of inertia’ analysis to increase stability. With a mid/high flex point, these shafts generate a penetrating ball flight and low to mid spin. The higher balance point produces lower swing weights.

KBS Tour Black 

KBS Tour Lite is designed for players seeking tight dispersion, higher trajectory, additional spin, precision control, & combining it with maximum distance in the ultimate lightweight package. The perfect golf weapon for a player of any skill level.

Mitsubishi MMT Utilizes a breakthrough Metal Mesh material which is made from individually braded strands of 304 Stainless Steel that is integrated into the shaft’s prepreg layers toward the tip, MMT™ (Metal Mesh Technology) improves density and stability, while also allowing for thinner overall composite wall construction, yielding a finely tuned, highly responsive shaft.

Nippon Modus Tour T is a mid/heavy steel shaft with a stiffer tip and softer mid section to control trajectory and provide tight dispersion.

Nippon NS PRO 750GH Neo aiming to provide a new standard for average golfers who prefer lightweight drivers.

Nippon NS PRO 950 Ever since its release, this top-selling model has been a favorite among golfers of all levels looking to take points off their scores. It features exceptional weight balance and control, with ultra-lightweight design comparable to graphite that makes it easier than ever to swing.

Nippon NS PRO Modus T was first brought out to tour as the N.S. PRO MODUS³ PROTO ST in 2010 and was put in play immediately. The PROTO ST was in the winning bags of eight professionals since it’s launch and became the second most popular MODUS³ irons shafts on tour, just behind the N.S. PRO MODUS³ Tour 120.

Project X LZ incorporates Loading Zone technology by adding a series of small steps below the grip section of the classic tapered PX profile. This slightly softens the midsection and helps raise the trajectory slightly. The result is a stable, low/mid launching shaft with smooth feel.

Project X T deliver penetrating trajectory and ball flight and strike the perfect balance of unrivaled distance, stability and control for golf’s most serious players.

PROJECT X Wedge features a softer profile than Project X iron shaft flexes, while maintaining the same weight for increased spin at lower trajectories.

TT AMT Black is the middle weight option in the new AMT range and delivers a mid-high trajectory and spin. Featuring Ascending Mass Technology, AMT Black gets progressively heavier as golfers move from their long irons to short irons.

TT Dynamic Gold Dynamic Gold uses Variable Wall Technology and a tour-proven step pattern to provide exceptional performance for serious golfers. This high-flex, tour-weight steel golf shaft is designed for skilled players seeking a low, penetrating ball flight for optimum control and accuracy.

TT Dynamic Gold 105 Engineered to be easier to swing, delivering the control and accuracy expected from the Dynamic Gold brand while adding distance from the increased club head speed produced by the lighter overall weight.

TT Dynamic Gold 120 shaft delivers the tour-caliber accuracy of Dynamic Gold in a lighter weight steel shaft. Stronger players will experience the exact same profile and launch as Dynamic Gold in a shaft that is easier to swing.

TT Dynamic Gold 95 A lightweight design that provides the stability and consistency that is inherent in the Dynamic Gold brand.

TT Dynamic Gold Mid 115 designed to complement modern day equipment by utilizing a unique shaft geometry to create a stiffer mid-section with an active tip section to promote an increase in launch and spin when compared to other Dynamic Gold offerings in similar weight categories.

TT Dynamic Gold Tour Issue 115g Cpr/Blk 

TT Dynamic Gold Tour Issue 115g 

TT Dynamic Gold Tour Issue Black shafts have the same tour-winning performance and weight sorting tolerances of Dynamic Gold Tour Issue, the #1 wedge shaft in the history of golf, but with a new liquid black finish.

TT Dynamic Gold Tour Issue provide the same power, control and the trademark penetrating ball flight associated with the entire series of Dynamic Gold irons shafts. The Tour Issue steel shafts have a Tour Only weight tolerance for custom precision fitting. The Dynamic Gold Tour Issue golf shafts are available in sets of eight (3-PW) and in S400 and X100 flexes, .355 only.

TT Elevate 95 MPH P design that helps increase initial launch/spin and creates optimal land angles to hold more green, Elevate Tour provides an option for players struggling with this “low spin” trend that are still looking for a slightly heavier shaft offering.

UST Helium Nanocore 60 lightweight golf shaft design, featuring our new Nanocore Technology for increased clubhead speed. Innovative materials and design profile stabilize shaft flexural and torsional characteristics in harmony with the ultra light weight design to optimize shaft performance and consistency with precise feel.

UST Recoil ESX T Recoil Technology provides optimal spring effect in the walls of the shaft and more efficient energy transfer to the ball for increased velocity and greater distance.

UST Recoil DART T designed after years of research, testing and development to precisely optimize shaft hoop stiffness in the critical areas of the golf shaft. To achieve maximum distance, optimum hoop stiffness is designed into the energy transfer section of the shaft. In the tip. section, the hoop stiffness is increased to maintain feel while also stabilizing the tip section for maximum consistency and optimum ball flight.

UST Recoil DART ESX 60 design technology also increases launch and ball flight characteristics. While DART technology optimizes hoop stiffness in the critical areas of the golf shaft.

UST Recoil DART HDC