Miura K-Grind 2.0 Custom Wedge

SKU : SAM0060
Earn up to 0 reward points from this purchase! See Details
Online and store prices may vary.

Miura K-Grind 2.0 Custom Wedge

Introducing the Miura Golf K-Grind 2.0 Milled wedge, the most stable wedge from all playing conditions. The “Original” Miura 1957 K-Grind Wedge was one of the most iconic wedges ever made with their signature “knuckles” or fluted sole. The KG 2.0 builds off the original design adding modern day grinding and milling techniques. Hand crafted throughout the entire process the KG 2.0 maintains Miura Golf’s trademark level of superior quality and feel.

Knuckles or Flutes

The “knuckles” or “flutes” serve a specific purpose in the playability and performance of this wedge. Designed to deliver a square clubface at impact the benefits extend to all turf conditions, by reducing twisting from rough and gliding through the sand.

2.0 Features

The 2.0 features a more modern sole design with increased bounce and roll along with heel and toe relief. The face and grooves have been milled to provide increased spin on intermediate and full shots.

Lofts are available 52º-60º in 2 degree increments to design the perfect set to match your set configuration.

Miura K-Grind 2.0 Custom Wedge Product Specs

  Loft° Lie° Weight (g) Bounce°
52 52 64 298 10
54 54 64 300 12
56 56 64 300 14
58 58 64 304 10
60 60 64 304 12

Note:This is for your reference only and does not denote the content of the product.

Miura K-Grind 2.0 Custom Wedge Shafts


ACCRA Constant Weight 105 The iCWT 75 and iCWT 85 offers golfers a smooth feeling option while the iCWT 95 and iCWT 105 incorporates ACCRA’s proprietary Ti-Mesh technology in the tip section for added stability.


ACCRA Constant Weight 85 iron shaft offers all of the performance benefits of the classic iSeries shafts all in a constant weight design. The twist that ACCRA incorporates in the iCWT is that the 4 weight options can be “dialed in” to virtually any flex.


ACCRA Constant Weight 95 shafts allow only small adjustments in flex by “stepping” each shaft, but this can change the performance. ACCRA has designed these shafts to enable professional club fitter the ability to move each weight up to 2 flexes.


ACCRA iSeries 40 features the same high modulus composite materials to ensure a smooth feel and enhanced performance. We have engineered a shaft that offers unsurpassed stability for tight dispersion without sacrificing feel.


ACCRA iSeries 50 proprietary constant taper design adds to the overall stability while maximizing energy transfer. The tip technology enables ACCRA fitters to mix weights and kick points to create “flighted” sets. Whether you are an accomplished golfer or a weekend warrior, the ACCRA iSeries can be customized to help you reach your potential.


ACCRA iSeries 60 iron shafts feature many aspects of previous ACCRA iSeries shafts, but most importantly, ACCRA engineers have added a added weight as a fitting variable. Once a weight is selected, each weight can be adjusted to, up to, five different flexes.


ACCRA iSeries 70 iSeries features the same high modulus composite materials to ensure a smooth feel and enhanced performance. We have engineered a shaft that offers unsurpassed stability for tight dispersion without sacrificing feel.


ACCRA iSeries 80 iSeries tip technology enables ACCRA fitters to mix weights and kick points. Whether you are an accomplished golfer or a weekend warrior, the ACCRA iSeries can be customized to help you reach your potential.


ACCRA iSeries Tour 100 has taken the popular iSeries line of iron shafts and redesigned them to benefit the specific requirements of a stronger “Tour” type. Golfers that require a heavier, more stable iron shaft yet want to benefit from the array of flex options that ACCRA pioneered in the iSeries line will love the iSeries Tour shafts.


ACCRA iSeries Tour 90 This combination of Titanium and graphite makes the ACCRA iSeries Tour line of shafts is simply the best option for any golfer looking to transition into graphite yet maintain the stability of steel.


ACCRA SPI TOUR Wedge The capability of carbon-fiber designed shafts to control torque, zone stiffness, and balance points allows the ACCRA iWedge to provide variously skilled golfers ideal dispersion and ball spin.


ACCRA SPI Wedge utilize the exceptional capabilities of state-of-the-art composite compounds to manage launch angle while improving spin rates.

Model Flex Weight (g) Torque Kick Point
ACCRA Constant Weight 105 Stiff 105 2.2 -
ACCRA Constant Weight 85 Regular 84 3.5 -
ACCRA Constant Weight 95 Stiff 95 2.5 -
ACCRA iSeries 40 Senior 45 5.0 -
ACCRA iSeries 50 Senior 58 4.5 -
ACCRA iSeries 60 Regular 60 4.0 -
ACCRA iSeries 70 Regular 70 3.5 -
ACCRA iSeries 80 Stiff 80 3.0 -
ACCRA iSeries Tour 100 X-Stiff 100 3.0 -
ACCRA iSeries Tour 90 Stiff 90 3.0 -
ACCRA SPI TOUR Wedge M5 123 3.00 -
ACCRA SPI Wedge M4 90 2.50 -

Fujikura Vista Pro 40i The redesigned Vista PRO Iron shafts benefit from Tour proven Fujikura technologies CAGE and Maximum Fiber Content. Cage is an innovative design process that surrounds graphite shaft fibers in the outer walls with a rigid “cage” structure.


Fujikura Vista Pro 50i This creates thinner, lighter walls that have the same feel and control of a heavier shaft. Maximum Fiber Content Provides greater stiffness and strength compared to a standard/conventional material at a similar weight. This allows for increased stability, distance, and feel.


Fujikura Vista Pro 60i Materials containing an extremely high fiber content are difficult to make, and only the best, high-precision material suppliers can accomplish it and they make it especially for Fujikura Golf.

Model Flex Weight (g) Torque Kick Point
Fujikura Vista Pro 40i Senior 51 4.1 -
Fujikura Vista Pro 50i Senior 61 3.7 -
Fujikura Vista Pro 60i Regular 70 3.4 -

KBS C-Taper designed for players requiring a low piercing trajectory and superior shot control and maximizes energy transfer, for a crisp feel, while optimizing shaft diameters in the taper and tip areas for low trajectory and spin control.


KBS C-Taper Lite performance benefits in a lighter weight design. The firm tip and soft butt produce a mid-high trajectory and controlled spin.


KBS $-Taper Engineered to provide superior feel while maintaining shot workability for players seeking a mid-launch and low to mid spin shaft.Shares the same bend profile as the KBS Tour shafts only with elongated step patterns to control spin, generating stable performance throughout the swing.


KBS $-Taper Black Black PVD finish featuring a 360 degree cured decal for lasting durability.


KBS 610 Wedge shaft delivers a lower, more penetrating ball flight with controlled spin. This wedge-specific shaft allows skilled players to produce knock-down and other workable shots into and around the green.


KBS Tour V a lightweight product that features larger outer diameters, resulting in a stable tip section and tight shot dispersion. For players that prefer a lighter weight shaft and less ball spin, the KBS TOUR-V is the ideal shaft option.

Model Flex Weight (g) Torque Kick Point
KBS C-Taper R, S, X 110, 120, 130 - -
KBS C-Taper Lite R, S, X 105, 110, 115 - -
KBS $-Taper R, R+, S, S+, X 110, 115, 120, 125, 130 - -
KBS $-Taper Black R, R+, S, S+, X 110, 115, 120, 125, 130 - -
KBS 610 Wedge Regular, Stiff, X-Stiff 110, 120, 125 - -
KBS Tour V R, S, X 100, 110, 120 - -

Mitsubishi Chemical OTI 105 Radial consistency is off the charts, average 99.9% with a 0.1% standard deviation. I never thought I would see those kind of numbers. Shaft manufacturing technology is improving and new standards are being written. You can absolutely disregard shaft alignment with the Mitsubishi OT iron shaft.


Mitsubishi Chemical OTI 75 shaft doesn’t use traditional prepreg sheet, but instead uses a new material for the golf shaft industry called Tow Prepreg. Tow Prepreg uses carbon fibers that are arranged in super-strong “bundles” (the way a steel cable is made). These bundles are impregnated with resin to create the Tow Prepreg, and then woven together like a braid.


Mitsubishi Chemical OTI 85 The “braiding” technology using Tow Prepreg is incredibly resistant to twisting and ovaling and creates a shaft with no spine, so the shaft performs more consistently than a shaft made with traditional sheet prepreg.


Mitsubishi Chemical OTI 95 It is not often that we get to see truly new technology in the golf shaft business. The Mistubishi OTi series is something in my experience is truly new.

Model Flex Weight (g) Torque Kick Point
Mitsubishi Chemical OTI 105 Stiff, X-Stiff 104, 110 2.8, 2.7 Mid, Mid
Mitsubishi Chemical OTI 75 Regular 76 3.3 Mid
Mitsubishi Chemical OTI 85 Regular 39.5 3.0 Mid
Mitsubishi Chemical OTI 95 Regular, Stiff 39.5, 39.5 3.0, 3.0 Mid, Mid

Nippon Modus 3 Wedge which was designed exclusively for wedges and thoroughly refined for operational ease, as well as feedback from PGA tour players, Nippon Shaft crafted a new steel shaft for wedges that offers first class short game performance.


Nippon Modus Tour 105 This magical marriage of “soft” and “hard” in the same shaft provides a combination of distance and accuracy that millions of golfers around the globe – including more than 100 touring professionals – have found difficult to resist.


Nippon Modus Tour 120 Desired trajectory as a result of the unique structure of a stiff tip section and softer mid section. Accurate distances due to the unique raw steel material and accompanying heat treatment.Tight dispersion coming from the exacting tolerances of the highest quality level.


Nippon Modus Tour 130 is a mid/heavy steel shaft with a stiffer tip and softer mid section to control trajectory and provide tight dispersion. This shaft is ideal for the stronger player looking for a mid/low launch and spin shaft.


Nippon NS PRO 850 enjoys rapidly growing popularity as an “attacking” shaft. These ultra-lightweight models feature easy contact thanks to their light weight and consistent directionality. What’s more, the full swings you enjoy as a result help provide the trajectory you want with crisp contact.


Nippon NS PRO 950 is distinguished by it’s easy-to-control trajectory. This enables precise head control, fully flexible yet with a sharp swing. Besides better accuracy, you’ll hit the ball confidently with a precise trajectory and without unintentional rolling.

Model Flex Weight (g) Torque Kick Point
Nippon Modus 3 Wedge Regular, Stiff, X-Stiff 103, 106.5, 112 1.9, 1.7, 1.5 Butt, Butt, Butt
Nippon Modus Tour 105 Regular, Stiff 103, 107 Low, Low Mid, Mid
Nippon Modus Tour 120 Stiff, X-Stiff 114, 120 Low, Low Mid/High, Mid/High
Nippon Modus Tour 130 Stiff, X-Stiff 124, 129 1.7-1.2, 1.6-1.2 Mid, Mid
Nippon NS PRO 850 Regular, Stiff 87, 91 2.1, 1.9 Mid, Mid
Nippon NS PRO 950 Regular, Stiff 94.5, 98 2.0, 1.9 Mid, Mid

Oban Steel 115 CT is a taper tip shaft with a constant weight of around 115-117 grams from 36″ to 41.5″. The absolute best thing about this shaft from a club builders perspective is that it is available in 12 different discrete lengths.

Model Flex Weight (g) Torque Kick Point
Oban Steel 115 CT Regular, Stiff 88-98 - -
Project X

Project X LZ features proprietary Loading Zone Technology for improved energy transfer and a smooth feel. The reinforced tip and butt sections act to maintain the tour proven stability you expect from Project X with a mid-trajectory launch profile.

Model Flex Weight (g) Torque Kick Point
Project X LZ Regular, Stiff, X-Stiff 115, 120, 125 2.0-1.7, 2.0-1.7, 2.0-1.7 -
True Temper

TT DG Tour Issue shafts provide the same power, control and the trademark penetrating ball flight associated with the entire series of Dynamic Gold irons shafts.


TT DG Tour Issue Black Onyx Wedge shafts have the same tour-winning performance and weight sorting tolerances of Dynamic Gold Tour Issue, the #1 wedge shaft in the history of golf, but with a new powder coat matte black finish that is extremely durable and helps minizine glare.


TT DG Tour Issue Wedge shafts feature the tightest tolerances of any shaft available in the market. Originally only available to Tour players due to their high demand for accuracy, are now available at The GolfWorks. The Tour Issue shafts are offered in sets only in S400 and X100 flex options and feature shaft weight tolerances of +/- .5 grams.

Model Flex Weight (g) Torque Kick Point
TT DG Tour Issue S400, X100 132, 130 1.6-1.5, 1.6-1.5 -
TT DG Tour Issue Black Onyx Wedge Stiff 132 - -
TT DG Tour Issue Wedge S400 132 - -

Miura K-Grind 2.0 Custom Wedge Grips

Golf Pride
Model Image
Golf Pride CP2 Pro
Golf Pride CP2 Wrap
Golf Pride MCC Plus 4 Blue
Golf Pride MCC Plus 4 Grey STD
Golf Pride Tour Velvet 360
Golf Pride Tour Velvet 60r
Golf Pride Tour Wrap Black
Golf Pride Tour Wrap White
Golf Pride Z Grip Cord
Model Image
Iomic Sticky 1.8
Iomic Sticky 2.3
Model Image
Lamkin Crossline
Miura Golf
Model Image
Miura Golf - Lamkin UTX
Miura Golf - No 1 50 Series - Black
Miura Golf - No 1 50 Series - White
Model Image
Pure Pro Standard Black
Model Image
Winn Dri Tac


Construction Finish MSRP
Forged Steel $320.00
TEL: 1 (909) 771-1111