ALDILA NV GREEN (NXT) 65 features the same constant taper design to a smooth and stable feel shot after shot.

ALDILA NVS ORANGE (NXT)  which uses up to twice as ultra-thin layers of premium grade carbon fiber material, to eliminate unwanted gaps and “dead zones” that can occur during the manufacturing process. MLT enhances feel and eliminate inconsistent shots cause by shaft variability.

ALDILA ROGUE WHITE 130 MSI pushes the limits of performance with the use of extremely high modulus, 130 M.S.I. Graphitic Carbon Fibers to provide the ultimate in performance from a Mid Launch, Low Spin profile.

ALDILA ROUGE SILVER 130 MSI offers unmatched performance and consistency through the use of advanced, extremely high modulus, Graphitic Carbon Fibers that provide performance characteristics never before available in a golf shaft.

ALDILA XTORSION COPPER 50R / 60S This new MAMBA (Multi-Axial Material Bias Angle) Technology places a high-tech material on the shaft in a +/- 45 degree fiber orientation. This unique use of a flat weave material on the exterior of the shaft provides significantly improved torsional stability to this counter weighted shaft in the lower half (tip-section) where the greatest percentage of twisting occurs during the swing and at impact.

CALLAWAY RCH 45 

CALLAWAY RCH 55 

CALLAWAY RCH 65 

CALLAWAY RCH 75 

FUJIKURA AIR SPEEDER 40 unites stability and speed in an ultra-lightweight profile through Fujikura’s use of proprietary materials and construction techniques. Unique lightweight design enhances swing speeds and ball speeds that generate more carry distance and longer drives.

FUJIKURA ATMOS TS BLACK is geared towards the performance golfer looking to keep the ball flighted down with low spin.

FUJIKURA ATMOS TS BLUE is the culmination of key learnings from more than two decades of tour-driven products. The development of ATMOS Tour Spec was an extensive process by which critical player feedback and fitting needs were at the forefront.

FUJIKURA MOTORE X F1 Designed for faster, more aggressive swing types. Stiffened tip and mid sections create a powerful and penetrating, low-mid trajectory with low-mid spin.

FUJIKURA MOTORE X F3 Designed for smooth and moderate swing types. Firm tip and mid sections produce a mid-high trajectory for longer carry distances with mid spin.

FUJIKURA PRO 2.0 features a more effective loading zone to store more energy in the downswing which translates to more clubhead speed.

FUJIKURA VENTUS BLACK a multi-material bias core construction technique that delivers ultimate stability through transition and impact (maximizing clubhead MOI) – increasing velocity and smash factor.

FUJIKURA VENTUS BLUE designed to significantly tighten shot dispersion and maximize ball speed especially on off-center shots. Ventus is a Tour-inspired profile and the first to include Fujikura’s all-new VeloCore Technology in an accelerated taper, ultra-stiff tip profile.

FUJIKURA VENTUS RED great candidate for a fairway wood shaft and those less aggressive swingers of the club, looking for smooth feel and increased carry distance.

GDI TOUR AD DI is designed to provide golfers with more power and stability in a golf shaft. Designed and manufactured exclusively at the Graphite Design factory headquarters in Japan, the Tour AD DI shafts are available in 50g R2(Lite), R1(Regular) and S flex, 60g SR (Stiff Regular), S and X flex, 70g S, X and TX (Tour X-Stiff) flex, 80g S, X and TX flex and 90g X flex.

GDI TOUR AD BB is designed to promote a low/mid launch angle and lower ball spin. Designed and manufactured exclusively at the Graphite Design factory headquarters in Japan, the Tour AD BB is available in 50g R2(Lite), R1(Regular) and S flex, 60g SR(Stiff Regular), S and X flex, 70g S and X flex and 80g S and X flex.

GDI TOUR AD HD series is a shaft that maximizes the head performance of large and high moments of inertia, which is the mainstream of wood today.

GDI TOUR AD IZ introduces the latest in the Tour AD premium line of golf shafts, the Graphite Design Tour AD IZ – “ Into the Zone” . Designed and manufactured at the Graphite Design Japan factory headquarters, the new Tour AD IZ wood shaft has a very stealthy look to it in black with white/orange accents and a sleek new matte finish.

GDI TOUR AD TP utilizes a brand new technology called “Fast Taper Technology” or FTT. This new technology incorporates a faster taper rate from the lower mid-section to the tip of the shaft.

GDI TOUR AD VR shaft also utilizes FTT -Fast Taper Technology, which incorporates a faster taper rate from the grip to the lower mid-section of the shaft, providing the overall feeling of greater club head control at impact and an increase in club head speed.

GDI TOUR AD XC shaft profile is softer in the butt section, stiff in the center section and has a stiff tip to promote low/mid launch angle and low spin with the ball.

KBS TD WOOD SHAFT 50 has the characteristics of the original KBS feel, efficiency, and optimization of spin and launch that the KBS product line is known for.

KBS TD WOOD SHAFT 60 It is a Mid Launch/Low Spin Performance Graphite golf shaft that optimizes the maximum performance and efficiency of spin and launch angles at various swing speeds.

KBS TD WOOD SHAFT 70 Designed for performance, optimizing spin rate and launch for more distance and more consistent, tighter ball flights.

LAGP LA GOLF SHAFTS TRONO 65 designed with a highly unique EI profile to achieve extreme stability and control while still providing outstanding feel and optimal launch conditions for the modern high ball speed player.

LAGP LA GOLF SHAFTS TRONO 75 The stiffness profile produces a shaft where the middle third of the shaft is significantly stiffer than the butt end. The tip, although stiff, is not overly rigid and still provides an optimal low/mid launch with less spin and increased workability.

MCA DIAMANA BF-SERIES incorporates high-strength DIALEAD™ Pitch Fiber by Mitsubishi Chemical into the butt-section of the shaft, adding unprecedented strength and control during shaft loading and unloading.

MCA DIAMANA ZF-SERIES feature moderately stronger, more stable butt and tip sections with a slightly softer and more active middle section. This produces a shaft that is incredibly solid during shaft loading and unloading, and at impact, but with smoother energy transfer and easier acceleration throughout the swing.

MCA FUBUKI MV-SERIES 45 focused point of increased density helps build the swing momentum needed to make a full turn, providing a fast-swinging, lightweight feel while straightening a fade or even producing a slight draw.

MCA GRAND BASSARA 39 is finished with an ultra-premium Ion Plating (IP) with a jet black dye, and sophisticated holographic decal.

MCA MMT WOOD  feature the same Metal Mesh Technology (MMT™), but strategically adapted to maximize performance within the lighter and thinner-walled structure of Driver/Hybrid shafts versus Irons.

MCA TENSEI AV BLUE this is slightly lighter throughout, with a lower torque. And the AV weave is tighter and thinner, to help prevent shaft ovaling and improve energy transfer.

MCA TENSEI CK PRO BLUE incorporates three times the Carbon Fiber/DuPont™ Kevlar® (CK) weave in the butt-section – providing enhanced stability and maximum feel.

MCA TENSEI CK PRO ORANGE This first of it’s kind bend profile for MCA GOLF uses a counter-balanced design along with an extreme tip-stiff design to provided added versatility for the stronger player.

MCA TENSEI CK PRO WHITE which features a multi-material design that incorporates more performance-oriented materials than we’ve ever used in a shaft.

PROJECT X CYPHER Features OXS (Optimized Exterior Stability) technology that is visible through a strategically placed graphite weave that is thinner, lighter and more efficient that traditional graphite weaves, providing enhanced mid-section stability to the lightweight design.

PROJECT X EVENFLOW BLUE Like a crashing wave in the Pacific, Even Flow’s revolutionary “even” bend profile transfers energy more efficiently throughout the swing to create maximum energy release at impact.

PROJECT X EVENFLOW GREEN is a mid launch/spin shaft that features a firm mid-section for increased stability.

PROJECT X EVENFLOW RIPTIDE designed with improved stability that builds on the widely successful "even bend" profile to provide unmatched feel and maximum energy transfer.

PROJECT X EVENFLOW T1100 WHITE uses the strongest high modulus fibers available to create the stiffest tip and lowest launching/spinning profile in the EvenFlow family.

PROJECT X HZRDUS HANDCRAFTED T1100 the strongest fiber available, to build a shaft with a stiff bend profile throughout so that it is the ultimate spin killer for players with the most aggressive tempo,” Don Brown, director of golf innovation and product strategy for Project X said. “HZRDUS T1100 is also counter-balanced which allows for players to add more club length or head mass to achieve more ball speed.

PROJECT X HZRDUS SMOKE BLACK Featuring a low-spin and low-launch profile that maintains the HZRDUS reputation.

PROJECT X HZRDUS SMOKE BLACK RDX features an ultra-stiff midsection along with a stiff tip section to provide a low launch and low spin shaft designed to keep up with your swing.

PROJECT X HZRDUS SMOKE BLUE RDX (PVD VERSION) is a counter balanced design that features a soft midsection to maximize shaft load and feel while maintaining a stout butt and tip section to keep up with all swing speeds and provide a stable feel through impact.

PROJECT X HZRDUS SMOKE GREEN PVD available in a traditional Smoke (matte) finish, as well as a PVD finish, and is the second shaft manufactured under Project X’s new Small Batch platform.

PROJECT X HZRDUS SMOKE IM10 Often a stiff material is very brittle, and a strong material is not very stiff. This makes shaft engineers develop a combination of multiple materials to try and dial in ideal strength and stiffness properties for a certain shaft, and in doing so, creates trade-offs when trying to design a lightweight, stable shaft that delivers maximum energy transfer.

PROJECT X HZRDUS YELLOW gives the HZRDUS line an even lower launching model. This shaft has a stiffer tip which reduces launch.

UST HELIUM BLACK light weight design using materials in innovative ways for the best in feel and stability never seen before in light weight structures. This is for the golfer seeking to maximize distance with longer builds and incredible control.

UST LIN-Q PURPLE has the unique ability to store and release energy unlike any other carbon fiber material. LIN-Q shafts will deliver more energy to the golf ball and deliver that energy more consistently for maximum distance and accuracy.

UST PROFORCE V2 HL RED features a balanced tip section for higher launch, increased ball speed and longer carry off the tee.

UST PROFORCE V2 YELLOW Provides greater control in the hands of the golfer for both aggressive and smooth tempo golfers. Provides optimal spring effect in the walls of the shaft and more efficient energy transfer to the ball for increased velocity and greater distance.

UST RECOIL ES 440 is a lightweight wood shafts designed to provide maximum distance and control for all golfers through the latest in design and materials. This is for the golfer looking to increase initial launch and maximum distance.

UST RECOIL ES 450 is a lightweight wood shafts designed to provide maximum distance and control for all golfers through the latest in design and materials. This is for the golfer looking to increase initial launch and maximum distance.